Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | V. I. Dubodelov, V. O. Seredenko, O. V. Seredenko, O. A. Parenjuk |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Casting processes |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001030760 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
за авторством: V. I. Dubodelov, та інші
Опубліковано: (2015)
за авторством: V. I. Dubodelov, та інші
Опубліковано: (2015)
Conditions for obtaining alloys with the structure of a frozen microemulsion and MHD-technology for copper melt with ultradisperse drops bazed on FeCrC
за авторством: V. I. Dubodelov, та інші
Опубліковано: (2018)
за авторством: V. I. Dubodelov, та інші
Опубліковано: (2018)
Structure forming of the aluminum alloy with hyperperitectic content of manganese and titan by constant magnetic field action on melt during its solidification
за авторством: V. Y. Dubodelov, та інші
Опубліковано: (2015)
за авторством: V. Y. Dubodelov, та інші
Опубліковано: (2015)
Copper distribution in the Al - 3,5 % Cu alloy at imposition of constant magnetic field on the melt during its solidification
за авторством: O. V. Seredenko
Опубліковано: (2012)
за авторством: O. V. Seredenko
Опубліковано: (2012)
Prospects of copper alloys application of the monotectic systems as material for collector inserts on electrotransport
за авторством: A. A. Parenjuk
Опубліковано: (2014)
за авторством: A. A. Parenjuk
Опубліковано: (2014)
Increase of properties of aluminum alloys by the action of a permanent magnetic field on melting at solid state
за авторством: V. I. Dubodielov, та інші
Опубліковано: (2018)
за авторством: V. I. Dubodielov, та інші
Опубліковано: (2018)
Perspective of monotectic copper alloys application as a current collector material for electric transport
за авторством: A. A. Parenjuk
Опубліковано: (2015)
за авторством: A. A. Parenjuk
Опубліковано: (2015)
Action on Phases and Properties of Cast Aluminum Alloy with Copper and Silicon of Constant Magnetic Field, Supposed on a Cooling and Solidifying Melt
за авторством: E. V. Seredenko
Опубліковано: (2019)
за авторством: E. V. Seredenko
Опубліковано: (2019)
Influence of temperature and time melts processing on conductor aluminum alloy cast structure and constant magnetic field during its cooling
за авторством: E. V. Seredenko
Опубліковано: (2017)
за авторством: E. V. Seredenko
Опубліковано: (2017)
Influence of melt temperature and vibration on the structure of AMg6 alloy
за авторством: V. P. Shkolyarenko, та інші
Опубліковано: (2024)
за авторством: V. P. Shkolyarenko, та інші
Опубліковано: (2024)
Increase of homogeneous structure of the alloy on the basis of aluminum by the impact of constant magnetic field on micro-scale disturbances in the melt flow at its casting
за авторством: E. V. Seredenko
Опубліковано: (2018)
за авторством: E. V. Seredenko
Опубліковано: (2018)
Some peculiarities in design of devices for metal melt dispersion
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2009)
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2009)
Clusters as structural components of metal melts
за авторством: V. L. Najdek, та інші
Опубліковано: (2015)
за авторством: V. L. Najdek, та інші
Опубліковано: (2015)
Effect of nano-additives on the structure-formation in polymer mixture melts
за авторством: N. M. Rezanova, та інші
Опубліковано: (2016)
за авторством: N. M. Rezanova, та інші
Опубліковано: (2016)
Modification of an Al – Mn alloy by Ti addition and magnetic field processing
за авторством: V. I. Dubodielov, та інші
Опубліковано: (2015)
за авторством: V. I. Dubodielov, та інші
Опубліковано: (2015)
Plasma-arc melting on dispersed substrate in mobile horizontal mould
за авторством: V. N. Koleda, та інші
Опубліковано: (2012)
за авторством: V. N. Koleda, та інші
Опубліковано: (2012)
Effect of dispersity of charge materials on processes of aluminothermics in ferrotitanium melting
за авторством: D. A. Kazarin, та інші
Опубліковано: (2014)
за авторством: D. A. Kazarin, та інші
Опубліковано: (2014)
Blast furnace melting study by measuring of electric potentials that arising in volume of furnace
за авторством: I. G. Muraveva, та інші
Опубліковано: (2013)
за авторством: I. G. Muraveva, та інші
Опубліковано: (2013)
About rise the additional centres of crystallization in the time of introduce small shots in melt
за авторством: L. A. Sokolovskaja, та інші
Опубліковано: (2014)
за авторством: L. A. Sokolovskaja, та інші
Опубліковано: (2014)
Thermokinetics of initial stage of contact melting in peritectic systems with the chemical compound
за авторством: V. P. Solntsev, та інші
Опубліковано: (2013)
за авторством: V. P. Solntsev, та інші
Опубліковано: (2013)
Optimization of conductive monotectic Cu-(FeCr-C) alloys composition
за авторством: V. V. Khristenko, та інші
Опубліковано: (2015)
за авторством: V. V. Khristenko, та інші
Опубліковано: (2015)
Volume defects of crystal structure in alkali halide crystals grown from melt by continuous automated method
за авторством: Goriletsky, V.I., та інші
Опубліковано: (2008)
за авторством: Goriletsky, V.I., та інші
Опубліковано: (2008)
Shape and geometric sizes of rapid-hardening materials produced by dispersion from melt in IMSM
за авторством: D. A. Kalashnik, та інші
Опубліковано: (2016)
за авторством: D. A. Kalashnik, та інші
Опубліковано: (2016)
Increasing the efficiency of the introduction of the disperse material into the melt under laser treatment conditions
за авторством: A. M. Tymoshenko
Опубліковано: (2018)
за авторством: A. M. Tymoshenko
Опубліковано: (2018)
Control of melt dosing
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2017)
за авторством: V. S. Bogushevskij, та інші
Опубліковано: (2017)
Підвищення властивостей сплавів алюмінію дією постійного магнітного поля на розплав при твердненні
за авторством: Dubodelov, V. I., та інші
Опубліковано: (2018)
за авторством: Dubodelov, V. I., та інші
Опубліковано: (2018)
Optimization of plasma-arc melting of ferroalloys from wastes of refractory and highlyreaction metals on dispersed substrate
за авторством: V. N. Koleda, та інші
Опубліковано: (2013)
за авторством: V. N. Koleda, та інші
Опубліковано: (2013)
Producing of rapidly hardened alloys by the method of dispersion during induction melting in a sectional mould
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2009)
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2009)
Preparation of disperse powders of VI-B group metals silicides by halogenide-oxide melts electrolysis
за авторством: V. V. Malyshev, та інші
Опубліковано: (2016)
за авторством: V. V. Malyshev, та інші
Опубліковано: (2016)
Penetration of aluminium alloys with active elements in to the magnetodynamic furnace
за авторством: V. O. Seredenko, та інші
Опубліковано: (2009)
за авторством: V. O. Seredenko, та інші
Опубліковано: (2009)
Corrosion of zirconium in halide melts
за авторством: A. O. Omelchuk, та інші
Опубліковано: (2016)
за авторством: A. O. Omelchuk, та інші
Опубліковано: (2016)
Significant technology of desulfurization and degassing pig iron dispersed by treating it with magnesium injected to the melt in the gas jet
за авторством: A. S. Vergun, та інші
Опубліковано: (2015)
за авторством: A. S. Vergun, та інші
Опубліковано: (2015)
Recuperators of Melting Bubbling Furnaces
за авторством: V. M. Olabin, та інші
Опубліковано: (2017)
за авторством: V. M. Olabin, та інші
Опубліковано: (2017)
Surface modification of basalt fibers, oxide and carbon materials for improvement their wetting with low-melting melts
за авторством: V. P. Krasovskyi, та інші
Опубліковано: (2022)
за авторством: V. P. Krasovskyi, та інші
Опубліковано: (2022)
Motion reversal modeling for a Brownian particle affected by nonequilibrium fluctuations
за авторством: A. D. Terets, та інші
Опубліковано: (2020)
за авторством: A. D. Terets, та інші
Опубліковано: (2020)
Melting-pouring ladle with induction heating
за авторством: V. O. Mushegjan
Опубліковано: (2010)
за авторством: V. O. Mushegjan
Опубліковано: (2010)
The differentiation of melts in the conditions of the upper mantle
за авторством: Usenko, O. V.
Опубліковано: (2012)
за авторством: Usenko, O. V.
Опубліковано: (2012)
Melting under the conditions of the upper mantle
за авторством: Usenko, O. V.
Опубліковано: (2011)
за авторством: Usenko, O. V.
Опубліковано: (2011)
Melting under the upper mantle conditions
за авторством: O. V. Usenko
Опубліковано: (2011)
за авторством: O. V. Usenko
Опубліковано: (2011)
Evolution of mantle melts and fluids at the Precambrian
за авторством: O. V. Usenko
Опубліковано: (2015)
за авторством: O. V. Usenko
Опубліковано: (2015)
Схожі ресурси
-
Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
за авторством: V. I. Dubodelov, та інші
Опубліковано: (2015) -
Conditions for obtaining alloys with the structure of a frozen microemulsion and MHD-technology for copper melt with ultradisperse drops bazed on FeCrC
за авторством: V. I. Dubodelov, та інші
Опубліковано: (2018) -
Structure forming of the aluminum alloy with hyperperitectic content of manganese and titan by constant magnetic field action on melt during its solidification
за авторством: V. Y. Dubodelov, та інші
Опубліковано: (2015) -
Copper distribution in the Al - 3,5 % Cu alloy at imposition of constant magnetic field on the melt during its solidification
за авторством: O. V. Seredenko
Опубліковано: (2012) -
Prospects of copper alloys application of the monotectic systems as material for collector inserts on electrotransport
за авторством: A. A. Parenjuk
Опубліковано: (2014)