Buchumschlag

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	K. O. Diadiura, A. S. Yunak, A. D. Pohrebniak, V. O. Okhrimenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Physical surface engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001059750
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: Chen, L., et al.
Veröffentlicht: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: L. Chen, et al.
Veröffentlicht: (2017)

The influence of VC–Al additive on wear resistance of cBN-based composites
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: P. Han, et al.
Veröffentlicht: (2018)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Influence of Directed Crystallization on the Structure and Wear-Resistance of Chromium Cast Irons
von: B. A. Kirievskij, et al.
Veröffentlicht: (2018)

Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)

Optimization of annealing wear resistant chromium-manganese cast irons for improve their machinability
von: K. S. Radchenko, et al.
Veröffentlicht: (2015)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Structure and wear resistance of chromium-manganese deposited metal
von: V. L. Malinov, et al.
Veröffentlicht: (2012)

Creation of chromium carbide steel with increased wear-resistance
von: O. M. Shevchenko, et al.
Veröffentlicht: (2012)

Wear intensity of the PcBN tools with nanolayered protective coating
von: A. S. Manokhin, et al.
Veröffentlicht: (2020)

Peculiarities of fracture of high-chromium cast irons under abrasive wear
von: V. V. Netrebko, et al.
Veröffentlicht: (2021)

Effect of temperature on hardness and wear resistance of high-chromium cast irons deposited with flux-cored strips
von: A. P. Voronchuk, et al.
Veröffentlicht: (2019)

Effect of physical and mechanical properties of diamond synthesized in the presence of ferroalloys, to wear resistance rock cutting tool
von: N. V. Novikov, et al.
Veröffentlicht: (2016)

Influence of a chromium carbide content on wear-resistance of the Fe-Cr-C system alloys
von: A. A. Mikhajlov, et al.
Veröffentlicht: (2010)

Improvement of wear resistance of low-alloyed structural steel by its plasma-powder overlaying with the alloys based on iron, chromium and nickel
von: Ye. F. Pereplotchikov, et al.
Veröffentlicht: (2018)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Tribology of cutting by tools equipped with cBN_based PSHM
von: A. S. Manokhin, et al.
Veröffentlicht: (2014)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

The wear resistance of titanium alloys
von: O. M. Solovar, et al.
Veröffentlicht: (2016)

Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool
von: O. P. Vynohradova, et al.
Veröffentlicht: (2024)

The optimization of chemical composition of the wear resistant high alloyed white cast irons
von: K. S. Radchenko, et al.
Veröffentlicht: (2011)

Electric arc surfacing of wear-resistant iron- and nickel-based alloys on copper
von: I. O. Riabtsev, et al.
Veröffentlicht: (2022)

Analysis of cutting edge wear during drilling composite materials
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Electrical resistance of the islet film of gold on the surface of thermobarically sintered cBN-ceramics
von: I. P. Fesenko, et al.
Veröffentlicht: (2021)

Термобаричне спікання композиту cBN–Cr₃C₂
von: Сліпченко, К.В., et al.
Veröffentlicht: (2017)

Investigation of wear-resistant protective coatings under conditions of hydro-abrasive wear
von: B. V. Stefaniv
Veröffentlicht: (2016)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)

The corrosion and wear-resistant steels for pumps
von: V. P. Havryliuk, et al.
Veröffentlicht: (2010)

Structure and wear resistance at abrasive wear of deposited material, hardened with carbides of different types
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2015)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
von: A. S. Osipov, et al.
Veröffentlicht: (2016)

Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014)

Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
von: A. P. Zhudra
Veröffentlicht: (2014)

Phase and structure formation of wear and corrosion resistant material &quot;chromium steel – Cr3C2&quot;
von: R. V. Yakovenko, et al.
Veröffentlicht: (2014)