Induction motors start with parametric converters using
Gespeichert in:
| Datum: | 2014 |
|---|---|
| Hauptverfasser: | I. V. Volkov, V. A. Vojtekh, A. P. Plugatar |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2014
|
| Schriftenreihe: | Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000121883 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)
THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
von: Lobov, V. I., et al.
Veröffentlicht: (2017)
von: Lobov, V. I., et al.
Veröffentlicht: (2017)
nvestigation of the Smooth Start-up of an Induction Motor
von: V. S. Petrushin, et al.
Veröffentlicht: (2018)
von: V. S. Petrushin, et al.
Veröffentlicht: (2018)
Forming the induction motor torque when starting
von: O. Khrebtova
Veröffentlicht: (2020)
von: O. Khrebtova
Veröffentlicht: (2020)
The parametrization method of generalized induction motor using the field analysis for design
von: I. V. Golovan
Veröffentlicht: (2019)
von: I. V. Golovan
Veröffentlicht: (2019)
Diagnosis of induction motors based on analysis of starting electromagnetic torque
von: Yu. M. Vaskovskyi, et al.
Veröffentlicht: (2017)
von: Yu. M. Vaskovskyi, et al.
Veröffentlicht: (2017)
Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)
von: Malyar, V. S., et al.
Veröffentlicht: (2021)
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)
von: Lobov, V. I., et al.
Veröffentlicht: (2015)
Study of the Synchronous Motor's Start-up with the Pulse-width Frequency Converter
von: O. N. Sinchuk, et al.
Veröffentlicht: (2014)
von: O. N. Sinchuk, et al.
Veröffentlicht: (2014)
Study of changed main flux reactance of squirrel-cage induction motors using field analysis of their starting characteristics
von: O. M. Popovych, et al.
Veröffentlicht: (2018)
von: O. M. Popovych, et al.
Veröffentlicht: (2018)
The frequency converter in the induction motor water pump system with feedeng from renewable energy sources
von: V. O. Voitekh
Veröffentlicht: (2019)
von: V. O. Voitekh
Veröffentlicht: (2019)
Influence of pulsations of the flexible DC motor on the management process of starting the gas turbine motor helicopter
von: V. G. Bashinskij, et al.
Veröffentlicht: (2020)
von: V. G. Bashinskij, et al.
Veröffentlicht: (2020)
Advanced Mathematical Model of Measuring the Starting Torque Motors
von: O. M. Vasilevskyi
Veröffentlicht: (2013)
von: O. M. Vasilevskyi
Veröffentlicht: (2013)
Diagnosis of induction motors by using the influence of higher current harmonics
von: E. V. Demenchuk, et al.
Veröffentlicht: (2021)
von: E. V. Demenchuk, et al.
Veröffentlicht: (2021)
Refined calculation of energy modes of a frequency-regulated induction motor
von: Volkov, V. A., et al.
Veröffentlicht: (2024)
von: Volkov, V. A., et al.
Veröffentlicht: (2024)
Electromechanical processes during the start of induction-type magnetic levitation
von: Bolyukh, V. F.
Veröffentlicht: (2025)
von: Bolyukh, V. F.
Veröffentlicht: (2025)
DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR
von: Lobov, V. I., et al.
Veröffentlicht: (2016)
von: Lobov, V. I., et al.
Veröffentlicht: (2016)
RESONANT PROCESSES IN STARTING MODES OF SYNCHRONOUS MOTORS WITH CAPACITORS IN THE EXCITATION WINDINGS CIRCUIT
von: Malyar, V. S., et al.
Veröffentlicht: (2017)
von: Malyar, V. S., et al.
Veröffentlicht: (2017)
STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)
The efficiency of use the inductive-capacitive converters of L-shaped structure in the combined power systems
von: V. P. Kaban
Veröffentlicht: (2016)
von: V. P. Kaban
Veröffentlicht: (2016)
Development of Algorithm of Formation of the Transients of Start-Up of a Dc Motor with Serial Excitation
von: M. S. Nikoriuk, et al.
Veröffentlicht: (2017)
von: M. S. Nikoriuk, et al.
Veröffentlicht: (2017)
Electric generators and motors of alternating current. Electromechatronic energy converters
von: L. I. Mazurenko, et al.
Veröffentlicht: (2013)
von: L. I. Mazurenko, et al.
Veröffentlicht: (2013)
Correction of the regime of a weak electric network when starting the electric motor with comparable power
von: O. I. Chyzhenko, et al.
Veröffentlicht: (2017)
von: O. I. Chyzhenko, et al.
Veröffentlicht: (2017)
Influence of cross-current currents on characteristics of induction motors
von: V. B. Finkelshtejn, et al.
Veröffentlicht: (2018)
von: V. B. Finkelshtejn, et al.
Veröffentlicht: (2018)
Selecting induction type electromechanical converter for electrodynamic processing of welds
von: I. P. Kondratenko, et al.
Veröffentlicht: (2017)
von: I. P. Kondratenko, et al.
Veröffentlicht: (2017)
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)
von: Tran, C. D., et al.
Veröffentlicht: (2025)
Determination of losses after ultraharmonics electromagnetic field in the induction motor
von: I. V. Holovan
Veröffentlicht: (2016)
von: I. V. Holovan
Veröffentlicht: (2016)
The design synthesis tools of submersible induction motors of innovative sonstructures
von: I. V. Holovan, et al.
Veröffentlicht: (2022)
von: I. V. Holovan, et al.
Veröffentlicht: (2022)
Complex design tools for improvement of electromechanical systems with induction motors
von: O. M. Popovych, et al.
Veröffentlicht: (2022)
von: O. M. Popovych, et al.
Veröffentlicht: (2022)
STUDYING THE EFFECT OF AN ADDITIONAL ACTIVE RESISTANCE IN THE FIELD WINDING CIRCUIT ON STARTING CHARACTERISTICS OF SALIENT-POLE SYNCHRONOUS MOTORS
von: Malyar, V. S., et al.
Veröffentlicht: (2018)
von: Malyar, V. S., et al.
Veröffentlicht: (2018)
The algorithm for generating the transient start-up of the DC motor with separate excitation to the angular velocity is above the main
von: M. S. Nikoriuk, et al.
Veröffentlicht: (2013)
von: M. S. Nikoriuk, et al.
Veröffentlicht: (2013)
Refinement of Analysis Operation Of Induction Motors as Part Electromechanical Systems Using Equivalenting Field Models Using Electrical Circuits
von: O. M. Popovych, et al.
Veröffentlicht: (2014)
von: O. M. Popovych, et al.
Veröffentlicht: (2014)
A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
DISTRIBUTION OF MAGNETIC INDUCTION LINEAR SYNCHRONUS MOTOR WITH MAGNETIC SUSPENSION
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)
Investigation of the semiconductor energy converters and electromechanical systems based on the magneto-electric motor
von: Ye. Antonov, et al.
Veröffentlicht: (2013)
von: Ye. Antonov, et al.
Veröffentlicht: (2013)
Mathematical model of a two-machine induction motor with rotating inductor
von: V. V. Lutso, et al.
Veröffentlicht: (2019)
von: V. V. Lutso, et al.
Veröffentlicht: (2019)
COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)
IMITATION MODEL OF A HIGH-SPEED INDUCTION MOTOR WITH FREQUENCY CONTROL
von: Pliugin, V. E., et al.
Veröffentlicht: (2017)
von: Pliugin, V. E., et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012) -
THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
von: Lobov, V. I., et al.
Veröffentlicht: (2017) -
nvestigation of the Smooth Start-up of an Induction Motor
von: V. S. Petrushin, et al.
Veröffentlicht: (2018) -
Forming the induction motor torque when starting
von: O. Khrebtova
Veröffentlicht: (2020) -
The parametrization method of generalized induction motor using the field analysis for design
von: I. V. Golovan
Veröffentlicht: (2019)