Comparative analysis various ways to feed-in metal for high-speed casting

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	A. V. Dudchenko, N. I. Tarasevich, I. N. Primak, V. M. Shcheglov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000403224
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Features of the siphon method of filling in the formwhen receiving a large steel castingsin pouring speed
von: A. V. Dudchenko, et al.
Veröffentlicht: (2013)

Pecularities of filling a mold for large steel casting in a storied gating system with a direct gate
von: A. V. Dudchenko, et al.
Veröffentlicht: (2013)

Pecularities of filling a mold for large steel casting in a storied gating system with a return riser
von: A. V. Dudchenko, et al.
Veröffentlicht: (2013)

Comparative analysis of small size high-speed synchronous magnetoelectric motors
von: Yu. M. Vaskovsky, et al.
Veröffentlicht: (2024)

Analysis of methods for high-speed forming the relief microimages on metallic substrates
von: Kryuchin, A.A., et al.
Veröffentlicht: (2007)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

Definition of speed limits continuous high-speed rolling of wire of a various diameter at use reducucing-calibration of the block
von: A. A. Gorbanev, et al.
Veröffentlicht: (2015)

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine
von: N. I. Tarasevich, et al.
Veröffentlicht: (2011)

Determination of the duration of shrinkage feeding from the heads of massive castings
von: E. V. Menjajlo
Veröffentlicht: (2017)

Rotor-Conveyor Lines Developed by PTIMA NAS of Ukraine, and the Concept of High-Speed Casting of Molds
von: V. S. Doroshenko
Veröffentlicht: (2019)

Control of press-plunger speed in die-casting machine
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2013)

Coefficient of crystallization speed twin-roll casting steel and aluminium
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2013)

The comparative analysis of the compressible plasma streams generated in QSPA from the various gases
von: Kozlov, A.N., et al.
Veröffentlicht: (2012)

System analysis of techniques of producing solid metal castings
von: V. I. Bolshakov, et al.
Veröffentlicht: (2015)

Comparative analysis of power and speed indicators linear pulse electromechanical converters electrodynamic and induction types
von: V. F. Boljukh, et al.
Veröffentlicht: (2019)

Comparative hygienic evaluation of arc welding process at constant and pulsed electrode wire feed
von: O. G. Levchenko, et al.
Veröffentlicht: (2015)

Prediction of the Conditions for the Formation of a Thin Strip of High-Strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters
von: M. I. Tarasevych, et al.
Veröffentlicht: (2020)

Comparative Analysis of Power Efficiency of Various Trands of Combustion Products Heat Recovery in Fuel Furnaces
von: B. S. Soroka, et al.
Veröffentlicht: (2013)

Peculiarities of hydrodynamic effect speed limits chemical deposition of silver in solution with various reductants
von: V. D. Kaluhin, et al.
Veröffentlicht: (2012)

Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)

Comparative Features of Multilayered Iterative Algorithm GMDH and Deep Feed-Forward Neural Networks
von: O. H. Moroz, et al.
Veröffentlicht: (2021)

Ladle and In-mold Modification Methods for Obtaining Castings from Cast Irons with Various Graphite Morphology
von: Zakharchenko, E.V., et al.
Veröffentlicht: (2019)

Ladle and In-mold Modification Methods for Obtaining Castings from Cast Irons with Various Graphite Morphology
von: E. V. Zakharchenko, et al.
Veröffentlicht: (2019)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

On movement of acoustic emission waves at high speeds
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)

An analysis of ways to improve the speed performance of algorithms for combining images in a combined correlation-extremal navigation systems of aircrafts.
von: A. V. Mezentsev, et al.
Veröffentlicht: (2017)

Rotational Speed of Liquid Metal in the Mold with Synchronous Electromagnetic Stirrer
von: T. V. Vishtak, et al.
Veröffentlicht: (2014)

Ways of improving the method of thermal analysis of the quality of liquid cast iron
von: K. A. Sirenko
Veröffentlicht: (2022)

Device for correcting the line voltage waveform that feeds a high-power controlled rectifier
von: O. I. Chyzhenko, et al.
Veröffentlicht: (2022)

Formation of eutectic composite coatings by high-speed melting
von: S. V. Litovchenko, et al.
Veröffentlicht: (2014)

High-speed multicolour photometry with CMOS cameras
von: S. M. Pokhvala, et al.
Veröffentlicht: (2012)

High-speed multicolour photometry with CMOS cameras
von: Pokhvala, S.M., et al.
Veröffentlicht: (2012)

Steel strip solidification in twin-roll casting unit
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Theoretical analysis of adsorption of various compounds onto hydrophilic and hydrophobic silicas compared to activated carbons
von: V. M. Gunko
Veröffentlicht: (2019)

Iterative Two-Channel Servodrive of Feed for High Precision Machine Tools and Mechanisms
von: V. B. Klepikov, et al.
Veröffentlicht: (2015)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Characteristics of new maize inbred lines and their hybrids with high nutritional and feed qualities
von: C. N. Radenovic, et al.
Veröffentlicht: (2017)

Computational comparative analysis of single-phase liquid metal stirrers
von: A. I. Glukhenkij, et al.
Veröffentlicht: (2015)

The technological efficiency analysis of different ways hot metal desulfurization
von: L. S. Molchanov, et al.
Veröffentlicht: (2014)

Non-metal inclusions in centrifugal casted stell
von: S. I. Gubenko, et al.
Veröffentlicht: (2016)