Buchumschlag

structure and microhardness of the al-mn alloys, with compounds of eutectic and peritectic transitions zone at chill mold casting under constant magnetic field superimposition

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	V. I. Dubodelov, V. A. Seredenko, A. V. Kosinskaja, E. V. Seredenko, Zh. D. Bogatyreva
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000403226
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

On the features of constant magnetic field action on aluminum alloys
von: V. I. Dubodelov, et al.
Veröffentlicht: (2018)

Modification of a Constant in magnetic field of the Cast structure of the multicomponent alloy systems based on al-Cu-Ce at pouring, Cooling and solidification
von: E. V. Seredenko, et al.
Veröffentlicht: (2014)

Action on Phases and Properties of Cast Aluminum Alloy with Copper and Silicon of Constant Magnetic Field, Supposed on a Cooling and Solidifying Melt
von: E. V. Seredenko
Veröffentlicht: (2019)

Influence of temperature and time melts processing on conductor aluminum alloy cast structure and constant magnetic field during its cooling
von: E. V. Seredenko
Veröffentlicht: (2017)

Increase of homogeneous structure of the alloy on the basis of aluminum by the impact of constant magnetic field on micro-scale disturbances in the melt flow at its casting
von: E. V. Seredenko
Veröffentlicht: (2018)

Thermokinetics of initial stage of contact melting in peritectic systems with the chemical compound
von: V. P. Solntsev, et al.
Veröffentlicht: (2013)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Kinetics of Crystallization of a Bulk-Amorphized Cu47Ni8Ti34Zr11 Alloy in Conditions of Chill Casting
von: A. B. Lysenko, et al.
Veröffentlicht: (2014)

Structure forming of the aluminum alloy with hyperperitectic content of manganese and titan by constant magnetic field action on melt during its solidification
von: V. Y. Dubodelov, et al.
Veröffentlicht: (2015)

Microhardness of compounds of rhenium with boron, carbon, and nitrogen
von: A. L. Ivanovskij
Veröffentlicht: (2012)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: B. P. Taran, et al.
Veröffentlicht: (2013)

Research of grains microinhomogeneous of the aluminum with copper alloys solidified in weak constant magnetic field
von: V. O. Seredenko, et al.
Veröffentlicht: (2013)

Processes of crystallization and solidification of castings in single-casting molds
von: V. V. Jasjukov, et al.
Veröffentlicht: (2018)

Modelling of superimposition and interaction of shock waves on the way of their motion by repeated explosions
von: V. G. Ageev, et al.
Veröffentlicht: (2012)

Copper distribution in the Al - 3,5 % Cu alloy at imposition of constant magnetic field on the melt during its solidification
von: O. V. Seredenko
Veröffentlicht: (2012)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Influence of regulated cooling on quality of a rolling roll from chilled cast iron
von: V. E. Khrychikov, et al.
Veröffentlicht: (2017)

Origin of the Molds for Casting Scythian Arrowheads
von: Ya. Olhovskyi
Veröffentlicht: (2016)

Advice on saving metal for casting ductile cast iron in sand molds
von: V. S. Doroshenko
Veröffentlicht: (2016)

Physics-chemical processes on surface of steel casts during casting into ceramized molds
von: T. V. Lysenko, et al.
Veröffentlicht: (2015)

Special features of ductile iron casting into evacuated molds
von: V. S. Doroshenko, et al.
Veröffentlicht: (2015)

Features of Structure Formation and Mechanical Properties of Ductile Cast Iron in Castings Obtained by Casting in Shell Molds Using &quot;In-mold&quot; Process
von: V. B. Bublikov, et al.
Veröffentlicht: (2019)

Features of peritectic transformation microscopic kinetics in Fe – C alloys
von: V. I. Mazur, et al.
Veröffentlicht: (2014)

Casting Molds Of Early Medieval Slavs: Reinterpretation Finds
von: Ya. V. Volodarets-Urbanovych
Veröffentlicht: (2017)

Self synchronizing of dynamic processes in a casting mold
von: A. A. Bondar, et al.
Veröffentlicht: (2013)

3D molding of the working cavity of a casting mold from loose sand by vacuum pumping
von: V. S. Doroshenko
Veröffentlicht: (2022)

The management of formation the structure of vermicular graphite cast iron in steel casting molds
von: S. P. Korolev, et al.
Veröffentlicht: (2014)

Influence of carbon content on features of the mechanism peritectic crystallisation and the dendritic structure characteristics of continuous cast billets of 09H2S steel
von: H. V. Levchenko, et al.
Veröffentlicht: (2012)

Effect of pre-chilling on ovarian tissue
von: Teas, Emmerson, et al.
Veröffentlicht: (2025)

Підвищення властивостей сплавів алюмінію дією постійного магнітного поля на розплав при твердненні
von: Dubodelov, V. I., et al.
Veröffentlicht: (2018)

Estimation of the influence of remelting on the resistance of die-casting molds inserts
von: O. I. Voronova, et al.
Veröffentlicht: (2018)

The low-temperature refrigerating complex for freezing of casting molds and cores
von: O. I. Shinskij, et al.
Veröffentlicht: (2016)

Computer-integrated simulation of metal casting process in a metal mold for casting pistons
von: G. G. Idris, et al.
Veröffentlicht: (2016)

Dissolution kinetics of Polystyrene models for the method of casting in shell molds
von: O. I. Shinskij, et al.
Veröffentlicht: (2014)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
von: V. I. Dubodelov, et al.
Veröffentlicht: (2015)

Properties of cast alloy based on eutectic nickel-vanadium carbide
von: H. P. Dmytriieva, et al.
Veröffentlicht: (2014)

Ladle and In-mold Modification Methods for Obtaining Castings from Cast Irons with Various Graphite Morphology
von: Zakharchenko, E.V., et al.
Veröffentlicht: (2019)

The effect of a constant electric current on the quality of the steel during the crystallization of the melt in the mold
von: V. T. Kalinin, et al.
Veröffentlicht: (2018)

Carbide-stabilizing charges of reaction chambers at in-mold modification of cast iron
von: E. V. Fesenko, et al.
Veröffentlicht: (2014)