Buchumschlag

Cold rolling improving at the expense of usage degree prediction of reserve plasticity

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	A. G. Prisjazhnyj
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000444946
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
von: V. A. Nikolaev, et al.
Veröffentlicht: (2009)

Possible options for the production of tinplate and cold-rolled sheet in Ukraine
von: Ju. V. Konovalov, et al.
Veröffentlicht: (2015)

Quantitative model for the prediction of the corrosion rate of cold-rolled 316L steel
von: A. Dittes, et al.
Veröffentlicht: (2023)

Simplified Modelling of Tandem Cold Rolling
von: Slimani, K., et al.
Veröffentlicht: (2018)

Rolls roughness change during their exploitation and its impact on polluted cold-rolled metal
von: E. N. Shebanits, et al.
Veröffentlicht: (2012)

The Mathematical Simulation of Electromechanical Systems of Cold Rolling Mills
von: E. S. Nazarova
Veröffentlicht: (2015)

Usage of the fission reaction for the measurement of the polarization degree of photon beam
von: Denyak, V.V., et al.
Veröffentlicht: (2009)

Problems of development of industrial usage of technology of double-roll casting and rolled of aluminum and iron-carbon alloys
von: I. R. Baranov
Veröffentlicht: (2018)

Structural Modification of AD-1 Aluminium Alloy by the Method of Cold Rolling with Shift
von: V. M. Varyukhin, et al.
Veröffentlicht: (2015)

Structural Modification of AD-1 Aluminium Alloy by the Method of Cold Rolling with Shift
von: Varyukhin, V.M., et al.
Veröffentlicht: (2015)

Status and trends of development of the production of cold-rolled tubes from titanium alloys
von: A. V. Mishchenko
Veröffentlicht: (2019)

Electronic Information: Organization and Usage Improvement
von: T. Hrinchak
Veröffentlicht: (2005)

Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
von: Tang, C., et al.
Veröffentlicht: (2015)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

Prediction of solidification parameters for twin-roll thin strip casting
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: A. M. Savitskij, et al.
Veröffentlicht: (2012)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

The solution to the plastic usage problems; a strong campaign for innovative waste management
von: Rosalyn, Maria Eva, et al.
Veröffentlicht: (2019)

The solution to the plastic usage problems; a strong campaign for innovative waste management
von: M. E. Rosalyn, et al.
Veröffentlicht: (2019)

Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)

Estimation of the real effectiveness of cold-rolled strip flatness control with selectivity emulsion feeding
von: Ju. Prikhodko
Veröffentlicht: (2013)

The influence of deformation on material structure and properties under longitudinal cold rolling of stepped shafts
von: M. Kovalik
Veröffentlicht: (2010)

Viscoelastic properties of antifrictive solid lubricants for cold plastic deformation of titanium alloys
von: V. S. Gavrilova, et al.
Veröffentlicht: (2017)

Use of industrial nitrogen for protective atmosphere formation in the bell type furnaces of cold rolling shop
von: A. V. Murashkin, et al.
Veröffentlicht: (2012)

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
von: Sedighi, M., et al.
Veröffentlicht: (2012)

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
von: M. Sedighi, et al.
Veröffentlicht: (2012)

The Development of the Classification of Expenses on the Elements
von: K. D. Abass, et al.
Veröffentlicht: (2012)

On expenses distribution in conveying problem
von: S. I. Dotsenko
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: A. M. Savitskij, et al.
Veröffentlicht: (2011)

New concept of rolling improving for shaped sections and modernization of rail and linear rolling mills. Message 2
von: S. A. Sukhomlin
Veröffentlicht: (2016)

Energy dissipation during the tension of the St3 steel produced by severe plastic deformation by the rolling with shear
von: E. G. Pashinskaja, et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement of energy efficiency of machines for resistance spot welding at the expense of a longitudinal compensation of reactive power
von: A. A. Pismennyj
Veröffentlicht: (2014)

Ecological and economic effectiveness of forest usage: directions and mechanisms of improvement
von: A. Karpuk, et al.
Veröffentlicht: (2015)

Thermal and physico-mechanical properties of antifriction solid lubricant for cold plastic deformation of titanium alloys
von: V. S. Gavrilova, et al.
Veröffentlicht: (2017)

Peculiarities of cold strip rolling technology and development of the method of calculation for deformation modes on two stand reversing mills
von: Ja. D. Vasilev, et al.
Veröffentlicht: (2018)

Efficiency improvement of polystyrene-based plastic scintillators
von: Adadurov, A.F., et al.
Veröffentlicht: (2009)