Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	N. I. Tarasevich, I. V. Korniets, I. N. Tarasevich
Format:	Artikel
Sprache:	English
Veröffentlicht:	2014
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000447884
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming
von: I. V. Korniets, et al.
Veröffentlicht: (2014)

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine
von: N. I. Tarasevich, et al.
Veröffentlicht: (2011)

Steel strip solidification in twin-roll casting unit
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Prediction of solidification parameters for twin-roll thin strip casting
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

Prospects for improving the quality of railway wheels made of a continuous casted billet
von: A. I. Babachenko, et al.
Veröffentlicht: (2013)

Alloying of surface layer of cast billet at casting
von: V. I. Tsotsko, et al.
Veröffentlicht: (2009)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Quality of low-carbon rod produced from billets and bloom continuous castings
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: O. M. Khoroshylov, et al.
Veröffentlicht: (2019)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: Khoroshylov, O.M., et al.
Veröffentlicht: (2019)

The influence of the cooling regime and chemical composition on dendritic structure formation of the ingot and continuous cast billets
von: O. I. Babachenko, et al.
Veröffentlicht: (2015)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Simulation of solid shell deformation conditions in the billet continuous casters mould
von: A. N. Smirnov, et al.
Veröffentlicht: (2009)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Mastering of rolled metal manufacture from continuous cast billet in conditions of section mills 250, 350 and 400 of OJSC "DMZ"
von: A. I. Berezhnoj, et al.
Veröffentlicht: (2011)

The impact of vibrating and gas-impulsive Treatment of solidifying metal on hydrodynamic processes of formation of Continuous-Cast billets
von: A. S. Nuradinov, et al.
Veröffentlicht: (2014)

Hereditary relationship of dendritic and grain structure of continuously cast billets made of medium-carbon steel
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2015)

Research of the effect of the cooling rate during solidification of a continuously cast billet on the features of the dendritic structure of carbon steel
von: O. I. Babachenko, et al.
Veröffentlicht: (2020)

Features of heat-resistant properties of metal of not-rolled boilertubes produced from continuously cast billets of steel 20
von: L. V. Opryshko, et al.
Veröffentlicht: (2020)

Selection of the optimum composition for low-carbon wire rod
von: A. S. Kozachjok, et al.
Veröffentlicht: (2012)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

Method of manufacture of large-sized forge-cast billets by electroslag welding
von: A. I. Voloshin, et al.
Veröffentlicht: (2012)

Department of Mathematical Methods of Research and Informational and Computer Technologies is Part of PTIMA NAS of Ukraine During 35 Years
von: N. I. Tarasevich, et al.
Veröffentlicht: (2018)

Electroslag casting of billets of high-pressure stop valve bodies
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2009)

Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)

External Thermal Impact as a Factor Controlling the Formation of the Structure of Cast Billets
von: A. S. Nuradinov, et al.
Veröffentlicht: (2019)

Scheme of stressed-deformed condition of continuous-casted slab in technological casting lines
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2018)