Buchumschlag

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	I. V. Korniets, N. I. Tarasevich, I. N. Tarasevich, I. K. Koshevoj, A. I. Rybitskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000447895
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine
von: N. I. Tarasevich, et al.
Veröffentlicht: (2011)

The analysis of heat removal intensity on the metal-crystallizer border effect on solid metal thickness in output from water-cooled twin-roll crystallizer is made
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Steel strip solidification in twin-roll casting unit
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

The influence of the cooling regime and chemical composition on dendritic structure formation of the ingot and continuous cast billets
von: O. I. Babachenko, et al.
Veröffentlicht: (2015)

Identification of Convection Heat Transfer Coefficient of Secondary Cooling Zone of CCM based on Least Squares Method and Stochastic Approximation Method
von: Ivanova, G.O.
Veröffentlicht: (2008)

Prediction of solidification parameters for twin-roll thin strip casting
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Construction electrical steelmaking plant for producing continuous casting round ingot in Dnepropetrovsk
von: Ju. Zhigljavskij, et al.
Veröffentlicht: (2011)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Dynamic cooling control continuous casting in transient modes of casting in the metallurgical micromills
von: A. N. Smirnov, et al.
Veröffentlicht: (2016)

Protection of casted steel from secondary oxidation and heat losses
von: A. P. Bochek, et al.
Veröffentlicht: (2012)

Influenced by of oscillation and parameters of oscillations of the moldon the surface quality of continuous casting ingots
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Cooled moulds for ingots formation with electromagnetic effect on melt
von: I. V. Shejko, et al.
Veröffentlicht: (2011)

Problems of calculation of heat transfer crisis in fuel assembles of water cooled reactors
von: G. I. Sharaevskij, et al.
Veröffentlicht: (2018)

Kinetics of solidification of an alloy at a high intensity of heat and mass transfer of low-temperature forms
von: T. V. Lysenko, et al.
Veröffentlicht: (2018)

About a choice of rational heat regimes cast of steel ingots with shot
von: L. A. Sokolovskaja
Veröffentlicht: (2013)

Department of Mathematical Methods of Research and Informational and Computer Technologies is Part of PTIMA NAS of Ukraine During 35 Years
von: N. I. Tarasevich, et al.
Veröffentlicht: (2018)

Methods of Cooling Castings in the Design of the LTO Process, Complementing the Technology of Casting and Heat Treatment
von: V. S. Doroshenko
Veröffentlicht: (2020)

Processes of heat and mass transfer in geothermal U-shaped circulation system at continuous of the heat removal
von: I. P. Kravchenko, et al.
Veröffentlicht: (2016)

Influence of technological parameters on metal density at large ingots manufacturing
von: M. V. Efimov, et al.
Veröffentlicht: (2017)

The concept of temperature waves and the effect of vibration on heat transfer and cristallization processes in castings
von: V. Z. Tydnjuk, et al.
Veröffentlicht: (2017)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Ways to Intensify Heat Exchange Processes in the Mold of a Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2019)

The heat flow estimation by crystallization of castings considering the generalized Fourier&#039;s low and phonon heat transfer
von: V. Z. Tydnjuk, et al.
Veröffentlicht: (2016)

Heat transfer in over-esterification reactor of periodical performance with evenly distributed heat sources of variable intensity
von: M. O. Budko, et al.
Veröffentlicht: (2013)

Research of the effect of the cooling rate during solidification of a continuously cast billet on the features of the dendritic structure of carbon steel
von: O. I. Babachenko, et al.
Veröffentlicht: (2020)

Plasma arc technology for producing ingots and castings of titanium aluminide
von: V. A. Shapovalov, et al.
Veröffentlicht: (2012)

Quality of large- tonnage ingots in mould casting (Analytic review)
von: V. A. Shapovalov, et al.
Veröffentlicht: (2013)

Peculiarities of mathematical modelling for steel ingots heating before rolling
von: E. N. Shebanits, et al.
Veröffentlicht: (2012)

Application of Electromagnetic Forces in Continuous Steel Casting
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Methods of forming the transfer functions of the heat flux receiver
von: V. A. Ivanjuk, et al.
Veröffentlicht: (2013)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Design principles of flask equipment for accelerated cooling of castings obtained by casting in vacuumized moulds
von: P. B. Kaljuzhnyj, et al.
Veröffentlicht: (2015)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
von: D. A. Djudkin
Veröffentlicht: (2011)

Quality assurance process for continuous casting
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Innovative ways of energy saving in the ferrous metallurgy of Ukraine
von: V. L. Najdek, et al.
Veröffentlicht: (2009)

Modelling of processes of heat, mass and power transfer in arc column and anode zone with refractory cathode
von: I. V. Krikent, et al.
Veröffentlicht: (2012)

Cooling of mechanical vibrations by heat flow
von: S. I. Kulinich, et al.
Veröffentlicht: (2018)