Cover Image

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming

Saved in:

Bibliographic Details
Date:	2014
Main Authors:	I. V. Korniets, N. I. Tarasevich, I. N. Tarasevich, I. K. Koshevoj, A. I. Rybitskij
Format:	Article
Language:	English
Published:	2014
Series:	Metal and casting of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000447895
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
by: N. I. Tarasevich, et al.
Published: (2014)

Effect of Intensive mixing of the melt on the hydrodynamics of liquid metal into the mold continuous casting machine
by: N. I. Tarasevich, et al.
Published: (2011)

Steel strip solidification in twin-roll casting unit
by: N. I. Tarasevich, et al.
Published: (2016)

The analysis of heat removal intensity on the metal-crystallizer border effect on solid metal thickness in output from water-cooled twin-roll crystallizer is made
by: N. I. Tarasevich, et al.
Published: (2016)

The influence of the cooling regime and chemical composition on dendritic structure formation of the ingot and continuous cast billets
by: O. I. Babachenko, et al.
Published: (2015)

Prediction of solidification parameters for twin-roll thin strip casting
by: N. I. Tarasevich, et al.
Published: (2016)

Construction electrical steelmaking plant for producing continuous casting round ingot in Dnepropetrovsk
by: Ju. Zhigljavskij, et al.
Published: (2011)

Strain state continuous ingot liquid core in the curved continuous casting machine
by: V. M. Poleshchuk, et al.
Published: (2015)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
by: A. N. Smirnov, et al.
Published: (2015)

Identification of Convection Heat Transfer Coefficient of Secondary Cooling Zone of CCM based on Least Squares Method and Stochastic Approximation Method
by: Ivanova, G.O.
Published: (2008)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
by: H. V. Levchenko, et al.
Published: (2011)

Dynamic cooling control continuous casting in transient modes of casting in the metallurgical micromills
by: A. N. Smirnov, et al.
Published: (2016)

Influenced by of oscillation and parameters of oscillations of the moldon the surface quality of continuous casting ingots
by: O. M. Smirnov, et al.
Published: (2015)

Cooled moulds for ingots formation with electromagnetic effect on melt
by: I. V. Shejko, et al.
Published: (2011)

Department of Mathematical Methods of Research and Informational and Computer Technologies is Part of PTIMA NAS of Ukraine During 35 Years
by: N. I. Tarasevich, et al.
Published: (2018)

Protection of casted steel from secondary oxidation and heat losses
by: A. P. Bochek, et al.
Published: (2012)

Suppression of segregation and control of the structure of ingots and casting
by: Shapovalov, V.O., et al.
Published: (2020)

Kinetics of solidification of an alloy at a high intensity of heat and mass transfer of low-temperature forms
by: T. V. Lysenko, et al.
Published: (2018)

Influence of technological parameters on metal density at large ingots manufacturing
by: M. V. Efimov, et al.
Published: (2017)

Problems of calculation of heat transfer crisis in fuel assembles of water cooled reactors
by: G. I. Sharaevskij, et al.
Published: (2018)

About a choice of rational heat regimes cast of steel ingots with shot
by: L. A. Sokolovskaja
Published: (2013)

Plasma arc technology for producing ingots and castings of titanium aluminide
by: V. A. Shapovalov, et al.
Published: (2012)

Quality of large- tonnage ingots in mould casting (Analytic review)
by: V. A. Shapovalov, et al.
Published: (2013)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
by: V. N. Matvienko, et al.
Published: (2018)

Innovative ways of energy saving in the ferrous metallurgy of Ukraine
by: V. L. Najdek, et al.
Published: (2009)

Pecularities of filling a mold for large steel casting in a storied gating system with a direct gate
by: A. V. Dudchenko, et al.
Published: (2013)

Pecularities of filling a mold for large steel casting in a storied gating system with a return riser
by: A. V. Dudchenko, et al.
Published: (2013)

Design principles of flask equipment for accelerated cooling of castings obtained by casting in vacuumized moulds
by: P. B. Kaljuzhnyj, et al.
Published: (2015)

Methods of Cooling Castings in the Design of the LTO Process, Complementing the Technology of Casting and Heat Treatment
by: V. S. Doroshenko
Published: (2020)

Comparative analysis various ways to feed-in metal for high-speed casting
by: A. V. Dudchenko, et al.
Published: (2014)

Research of the effect of the cooling rate during solidification of a continuously cast billet on the features of the dendritic structure of carbon steel
by: O. I. Babachenko, et al.
Published: (2020)

Application of Electromagnetic Forces in Continuous Steel Casting
by: V. I. Dubodelov, et al.
Published: (2019)

Methods of forming the transfer functions of the heat flux receiver
by: V. A. Ivanjuk, et al.
Published: (2013)

The concept of temperature waves and the effect of vibration on heat transfer and cristallization processes in castings
by: V. Z. Tydnjuk, et al.
Published: (2017)

A numerical evaluation of the temperature of a solidification point in ingot casting processes
by: M. Zambrano
Published: (2023)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
by: D. G. Palamar
Published: (2013)

Intense plastic deformation of high-purity cast beryllium
by: Vasilev, A.A., et al.
Published: (2020)

Control of casting solidification and cooling in silica sand moulds due to it fluidization
by: P. B. Kaljuzhnyj, et al.
Published: (2015)

Heat transfer on profiled surfaces of industrial film-type cooling towers
by: Dubrovskyi V.V., et al.
Published: (2014)

Concepts of cooling castings using cryotechnology, new bulk materials and casting methods
by: V. S. Doroshenko, et al.
Published: (2019)