The research of temperature influence and tempering time on a structure and properties of steel to the instrument of hot deformation
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | E. E. Nefedeva, V. L. Pljuta |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2014
|
| Назва видання: | Metal and casting of Ukraine |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000447948 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
The modeling and optimization of tempering 17H5MA tool hot deformation
за авторством: S. V. Bobyr, та інші
Опубліковано: (2015)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2015)
Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
за авторством: S. V. Bobyr, та інші
Опубліковано: (2012)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2012)
Instrumental stamp steels for hot deformation (review)
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2016)
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2016)
Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014)
Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
за авторством: S. E. Kondratiuk, та інші
Опубліковано: (2016)
за авторством: S. E. Kondratiuk, та інші
Опубліковано: (2016)
Influence of low-temperature tempered structure and properties of welded joints of high-strength steel 30Kh2N2MF
за авторством: O. A. Haivoronskyi, та інші
Опубліковано: (2020)
за авторством: O. A. Haivoronskyi, та інші
Опубліковано: (2020)
Effect of hot plastic deformation and heat treatment on structure and mechanical properties of steels for railway wheels
за авторством: A. I. Babachenko, та інші
Опубліковано: (2012)
за авторством: A. I. Babachenko, та інші
Опубліковано: (2012)
Heredity and transformation of cast steel structure at hot deformation and thermal treatment
за авторством: Ye. Kondratiuk, та інші
Опубліковано: (2009)
за авторством: Ye. Kondratiuk, та інші
Опубліковано: (2009)
The stamping steel for hot deformation with controlled austenit transformation
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2014)
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2014)
Influence of welding modes on decarburization in the haz of R91 steel in welded joints of dissimilar steels after high-temperature tempering
за авторством: M. O. Nimko, та інші
Опубліковано: (2022)
за авторством: M. O. Nimko, та інші
Опубліковано: (2022)
Structure and Properties of Tempered Steel 40H3N5M3F Obtained by Electroslag Remelting at High Temperatures
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2015)
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2015)
Evaluation of heat-resistant steels tendency to tempering brittleness by using high-temperature tests
за авторством: Ju. Skulskij, та інші
Опубліковано: (2016)
за авторством: Ju. Skulskij, та інші
Опубліковано: (2016)
Low carbon steel for hot metal deformation tools (review)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
Research of the influence of siliconizing on the structure and properties of hot-pressed polycrystalline silicon carbide
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2018)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2018)
Research of the influence of silicon impregnation on the structure and properties of hot-pressed silicon carbide
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2017)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2017)
Shanging the physical properties of alloy steels during the development of high temper brittleness
за авторством: S. N. Poljakov, та інші
Опубліковано: (2015)
за авторством: S. N. Poljakov, та інші
Опубліковано: (2015)
Influence on bainitic hardening properties and structural states of reinforcing rolled steel 30GS
за авторством: G. V. Levchenko, та інші
Опубліковано: (2014)
за авторством: G. V. Levchenko, та інші
Опубліковано: (2014)
Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
за авторством: L. V. Opryshko, та інші
Опубліковано: (2012)
за авторством: L. V. Opryshko, та інші
Опубліковано: (2012)
Influence of tempering modes on fine structure parameters, stress and hardness of 25Cr2Mo1V steel
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
Die Steel with Regulated Austenitic Transformation for Hot Deformation of Copper-Nickel Alloy
за авторством: K. O. Gogaev, та інші
Опубліковано: (2022)
за авторством: K. O. Gogaev, та інші
Опубліковано: (2022)
The research of the temperature fields during the tempering with the heating of high-frequency currents using mathematical modeling
за авторством: Погрібний, М. А., та інші
Опубліковано: (2015)
за авторством: Погрібний, М. А., та інші
Опубліковано: (2015)
The research of the temperature fields during the tempering with the heating of high-frequency currents using mathematical modeling
за авторством: Погрібний, М. А., та інші
Опубліковано: (2015)
за авторством: Погрібний, М. А., та інші
Опубліковано: (2015)
The research of the temperature fields during the tempering with the heating of high-frequency currents using mathematical modeling
за авторством: M. A. Pohribnyi, та інші
Опубліковано: (2013)
за авторством: M. A. Pohribnyi, та інші
Опубліковано: (2013)
Selection of modes of high-temperature tempering of heat-resistant steel welded joints made by electrodes Thermanit MTS616
за авторством: Ju. Skulskij, та інші
Опубліковано: (2016)
за авторством: Ju. Skulskij, та інші
Опубліковано: (2016)
Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
за авторством: T. N. Golubenko, та інші
Опубліковано: (2012)
за авторством: T. N. Golubenko, та інші
Опубліковано: (2012)
The structure of the chromium carbide steel that obtained by hot pressing
за авторством: O. M. Shevchenko
Опубліковано: (2015)
за авторством: O. M. Shevchenko
Опубліковано: (2015)
Influence of process-dependent factors on structure and service properties of hot-extruded
за авторством: L. V. Opryshko
Опубліковано: (2010)
за авторством: L. V. Opryshko
Опубліковано: (2010)
Structure of multilayer specimens, simulating surfaced tools for hot deforming of metals
за авторством: I. A. Rjabtsev, та інші
Опубліковано: (2013)
за авторством: I. A. Rjabtsev, та інші
Опубліковано: (2013)
The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
за авторством: S. V. Bobyr
Опубліковано: (2014)
за авторством: S. V. Bobyr
Опубліковано: (2014)
Formation of structure and mechanical properties of rounds of continuous casting steel
за авторством: G. V. Levchenko, та інші
Опубліковано: (2011)
за авторством: G. V. Levchenko, та інші
Опубліковано: (2011)
The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
за авторством: O. S. Serhiienko, та інші
Опубліковано: (2011)
за авторством: O. S. Serhiienko, та інші
Опубліковано: (2011)
Account for pore formation in heat treatment of welded elements of steels, prone to initiation of temper cracks
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2013)
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2013)
Influence of nonmetallics on formation of pores during hot rolling of bearing steel
за авторством: O. M. Moroz, та інші
Опубліковано: (2015)
за авторством: O. M. Moroz, та інші
Опубліковано: (2015)
Isothermal Martensitic Transformation in a Tool Steel and Its Effect on Carbide Formation under Tempering
за авторством: V. A. Sirosh, та інші
Опубліковано: (2014)
за авторством: V. A. Sirosh, та інші
Опубліковано: (2014)
Genomics and virion DNA structure of temperate erwiniophages 49 and 59
за авторством: M. A. Zlatogurskaja, та інші
Опубліковано: (2017)
за авторством: M. A. Zlatogurskaja, та інші
Опубліковано: (2017)
Constitutive Equations and Processing Maps for 49MnVS3 Non-Quenched and Tempered Steel
за авторством: Y. F. Chen, та інші
Опубліковано: (2014)
за авторством: Y. F. Chen, та інші
Опубліковано: (2014)
Structure-phase transformations in the quenched constructional steel at deformation
за авторством: Ju. F. Ivanov, та інші
Опубліковано: (2009)
за авторством: Ju. F. Ivanov, та інші
Опубліковано: (2009)
Morphological heterogeneity of temperate erwiniophage 59
за авторством: M. A. Zlatohurska, та інші
Опубліковано: (2016)
за авторством: M. A. Zlatohurska, та інші
Опубліковано: (2016)
Influence of doping level on the strength properties of structural steels
за авторством: A. S. Kozachjok, та інші
Опубліковано: (2014)
за авторством: A. S. Kozachjok, та інші
Опубліковано: (2014)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
за авторством: Berto, F., та інші
Опубліковано: (2015)
за авторством: Berto, F., та інші
Опубліковано: (2015)
Схожі ресурси
-
The modeling and optimization of tempering 17H5MA tool hot deformation
за авторством: S. V. Bobyr, та інші
Опубліковано: (2015) -
Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
за авторством: S. V. Bobyr, та інші
Опубліковано: (2012) -
Instrumental stamp steels for hot deformation (review)
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2016) -
Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014) -
Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
за авторством: S. E. Kondratiuk, та інші
Опубліковано: (2016)