Cover Image

Evaluation of efficiency of reduction of residual stresses in circumferential joints of pipes using postweld explosion treatment

Saved in:

Bibliographic Details
Date:	2014
Main Author:	A. G. Bryzgalin
Format:	Article
Language:	English
Published:	2014
Series:	Automatic Welding
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000463143
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Calculation of parameters of explosion treatment for reduction of residual stresses in circumferential welds of pipelines
by: A. G. Bryzgalin
Published: (2013)

Mathematical modeling of residual stress relaxation during performance of postweld heat treatment
by: O. V. Makhnenko, et al.
Published: (2023)

Widening of technological capabilities of explosion treatment for reduction of residual stresses in welded joints of decomposers of up to 5000 m3 volume
by: L. M. Lobanov, et al.
Published: (2009)

Effect of preliminary deforming and electrodynamic treatment on stressed state of circumferential welded joints of alloy AMg6
by: L. M. Lobanov, et al.
Published: (2013)

Influence of pulsed electromagnetic field treatment on stressed and deformed state of circumferential welded joints of aluminum AMg6 alloy
by: L. M. Lobanov, et al.
Published: (2020)

Causes of stress corrosion fracture of site circumferential joint of main gas pipeline
by: A. A. Rybakov, et al.
Published: (2014)

Development of technology and equipment for reduction of residual stresses and straightening in welded structures applying electrodynamic treatment
by: L. M. Lobanov, et al.
Published: (2017)

Residual stresses of circumferential welds of main gas pipeline in long-term service under the North conditions
by: N. I. Golikov, et al.
Published: (2012)

Effect of welding and postweld heating on structural transformations and properties of HAZ of welded joints on hardening steels
by: Ju. M. Lebedev
Published: (2009)

Influence of parameters of electrodynamic treatment on residual stresses of welded joints of AMG6 alloy
by: L. M. Lobanov, et al.
Published: (2019)

Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
by: Stepanov, G.V., et al.
Published: (2008)

Residual strength of the above-ground section of the main pipeline with circumferential cracks
by: A. R. Dziubyk, et al.
Published: (2018)

Repair welding of turbine body parts of heat-resistant steels without postweld heat treatment
by: A. K. Tsarjuk, et al.
Published: (2009)

Evaluation Of Residual Life Of A Damaged T-Joint
by: P. S. Jukhimets
Published: (2015)

Producing of coaxial joints of dissimilar metals with the help of explosion
by: A. G. Bryzgalin, et al.
Published: (2024)

Evaluation of residual life time of hydrogenated pipe by the acoustic signal parameters
by: V. R. Skalskyi, et al.
Published: (2015)

Mathematical modeling of residual stresses in a composite welded joint of the collector adapter sleeve to the branch pipe of ZPM-440 steam generator
by: A. A. Makarenko, et al.
Published: (2023)

New technology of explosion welding for producing joints of high-strength aluminium
by: Ju. Illarionov, et al.
Published: (2009)

The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
by: Stamenović, М., et al.
Published: (2011)

The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
by: M. Stamenović, et al.
Published: (2011)

Nondestructive evaluation of residual stresses in welded joints on the base of a combination of ultrasonic testing and speckle-interferometry
by: L. M. Lobanov, et al.
Published: (2023)

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
by: M. Sedighi, et al.
Published: (2012)

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
by: Sedighi, M., et al.
Published: (2012)

Prediction of limiting amplitudes of cycle of stresses of welded joints with steady-state residual stresses
by: V. A. Degtjarev
Published: (2016)

Modeling a circumferential crack in pipe area of a flat bottom of thick-walled pressure vessel
by: V. V. Kyrychok, et al.
Published: (2019)

Fatigue resistance of steel welded joints of different strength with final residual stresses
by: V. A. Degtjarev
Published: (2018)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
by: Yu. Kudryavtsev, et al.
Published: (2013)

Evaluation of deformability of pipe steel joints made by automatic continuous flash-butt welding
by: S. I. Kuchuk-Jatsenko, et al.
Published: (2011)

Analysis of conditions of initiation and propagation of corrosion cracks in the zone of circumferential joints of main gas pipelines
by: V. I. Makhnenko, et al.
Published: (2009)

Technology of heat treatment of Cl.56 steel pipe joints made by the flash-butt welding
by: S. I. Kuchuk-Jatsenko, et al.
Published: (2013)

Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment
by: O. V. Makhnenko, et al.
Published: (2021)

Residual stresses and mechanical properties of turbine blades after laser treatment of surface
by: Ja. Dzjankhua, et al.
Published: (2010)

Stress-strain state of polymer pipe welded joints made by butt welding under angle
by: E. S. Nikonova, et al.
Published: (2009)

Effect of residual stresses in welded joints of two-layer steels on in-service reliability of metal structures
by: V. V. Chigarev, et al.
Published: (2013)

Efficiency of different methods of strengthening treatment of welded joints
by: V. A. Degtjarev
Published: (2017)

Determination of the residual life of the oil pipe taking into account material degradation
by: O. Y. Andreikiv, et al.
Published: (2024)

Residual stresses in thin-sheet zinc-coated steel joints after arc welding and plasma brazing
by: S. V. Maksymova, et al.
Published: (2020)

Effect of cooling mode after diffusion welding and brazing on residual stresses in graphite—copper edge joints
by: V. V. Kvasnitskij, et al.
Published: (2015)

Enlargement of ingots by successive circumferential surfacing
by: A. A. Polishko
Published: (2012)

Manufacture of coaxial copper-aluminium tubular parts by using explosion welding and drawing
by: A. G. Bryzgalin, et al.
Published: (2015)