Evaluation of efficiency of reduction of residual stresses in circumferential joints of pipes using postweld explosion treatment
Gespeichert in:
| Datum: | 2014 |
|---|---|
| 1. Verfasser: | A. G. Bryzgalin |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2014
|
| Schriftenreihe: | Automatic Welding |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000463143 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Calculation of parameters of explosion treatment for reduction of residual stresses in circumferential welds of pipelines
von: A. G. Bryzgalin
Veröffentlicht: (2013)
von: A. G. Bryzgalin
Veröffentlicht: (2013)
Mathematical modeling of residual stress relaxation during performance of postweld heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2023)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2023)
Widening of technological capabilities of explosion treatment for reduction of residual stresses in welded joints of decomposers of up to 5000 m3 volume
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)
Effect of preliminary deforming and electrodynamic treatment on stressed state of circumferential welded joints of alloy AMg6
von: L. M. Lobanov, et al.
Veröffentlicht: (2013)
von: L. M. Lobanov, et al.
Veröffentlicht: (2013)
Influence of pulsed electromagnetic field treatment on stressed and deformed state of circumferential welded joints of aluminum AMg6 alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2020)
von: L. M. Lobanov, et al.
Veröffentlicht: (2020)
Causes of stress corrosion fracture of site circumferential joint of main gas pipeline
von: A. A. Rybakov, et al.
Veröffentlicht: (2014)
von: A. A. Rybakov, et al.
Veröffentlicht: (2014)
Development of technology and equipment for reduction of residual stresses and straightening in welded structures applying electrodynamic treatment
von: L. M. Lobanov, et al.
Veröffentlicht: (2017)
von: L. M. Lobanov, et al.
Veröffentlicht: (2017)
Residual stresses of circumferential welds of main gas pipeline in long-term service under the North conditions
von: N. I. Golikov, et al.
Veröffentlicht: (2012)
von: N. I. Golikov, et al.
Veröffentlicht: (2012)
Influence of parameters of electrodynamic treatment on residual stresses of welded joints of AMG6 alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2019)
von: L. M. Lobanov, et al.
Veröffentlicht: (2019)
Effect of welding and postweld heating on structural transformations and properties of HAZ of welded joints on hardening steels
von: Ju. M. Lebedev
Veröffentlicht: (2009)
von: Ju. M. Lebedev
Veröffentlicht: (2009)
Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
von: Stepanov, G.V., et al.
Veröffentlicht: (2008)
von: Stepanov, G.V., et al.
Veröffentlicht: (2008)
Evaluation Of Residual Life Of A Damaged T-Joint
von: P. S. Jukhimets
Veröffentlicht: (2015)
von: P. S. Jukhimets
Veröffentlicht: (2015)
Producing of coaxial joints of dissimilar metals with the help of explosion
von: A. G. Bryzgalin, et al.
Veröffentlicht: (2024)
von: A. G. Bryzgalin, et al.
Veröffentlicht: (2024)
Residual strength of the above-ground section of the main pipeline with circumferential cracks
von: A. R. Dziubyk, et al.
Veröffentlicht: (2018)
von: A. R. Dziubyk, et al.
Veröffentlicht: (2018)
Repair welding of turbine body parts of heat-resistant steels without postweld heat treatment
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2009)
von: A. K. Tsarjuk, et al.
Veröffentlicht: (2009)
Evaluation of residual life time of hydrogenated pipe by the acoustic signal parameters
von: V. R. Skalskyi, et al.
Veröffentlicht: (2015)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2015)
Mathematical modeling of residual stresses in a composite welded joint of the collector adapter sleeve to the branch pipe of ZPM-440 steam generator
von: A. A. Makarenko, et al.
Veröffentlicht: (2023)
von: A. A. Makarenko, et al.
Veröffentlicht: (2023)
New technology of explosion welding for producing joints of high-strength aluminium
von: Ju. Illarionov, et al.
Veröffentlicht: (2009)
von: Ju. Illarionov, et al.
Veröffentlicht: (2009)
Nondestructive evaluation of residual stresses in welded joints on the base of a combination of ultrasonic testing and speckle-interferometry
von: L. M. Lobanov, et al.
Veröffentlicht: (2023)
von: L. M. Lobanov, et al.
Veröffentlicht: (2023)
The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
von: Stamenović, М., et al.
Veröffentlicht: (2011)
von: Stamenović, М., et al.
Veröffentlicht: (2011)
The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
von: M. Stamenović, et al.
Veröffentlicht: (2011)
von: M. Stamenović, et al.
Veröffentlicht: (2011)
Prediction of limiting amplitudes of cycle of stresses of welded joints with steady-state residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2016)
von: V. A. Degtjarev
Veröffentlicht: (2016)
Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
von: Sedighi, M., et al.
Veröffentlicht: (2012)
von: Sedighi, M., et al.
Veröffentlicht: (2012)
Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
von: M. Sedighi, et al.
Veröffentlicht: (2012)
von: M. Sedighi, et al.
Veröffentlicht: (2012)
Modeling a circumferential crack in pipe area of a flat bottom of thick-walled pressure vessel
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
Evaluation of Residual Stresses in Carbon/Carbon Composites Components Joined to Copper before and after Pulse Electromagnetic Treatment
von: Stepanov, G.V., et al.
Veröffentlicht: (2011)
von: Stepanov, G.V., et al.
Veröffentlicht: (2011)
Fatigue resistance of steel welded joints of different strength with final residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2018)
von: V. A. Degtjarev
Veröffentlicht: (2018)
Residual stress management in welding: measurement, fatigue analysis and improvement treatments
von: Yu. Kudryavtsev, et al.
Veröffentlicht: (2013)
von: Yu. Kudryavtsev, et al.
Veröffentlicht: (2013)
Residual stress management in welding: measurement, fatigue analysis and improvement treatments
von: Kudryavtsev, Yu., et al.
Veröffentlicht: (2013)
von: Kudryavtsev, Yu., et al.
Veröffentlicht: (2013)
Evaluation of deformability of pipe steel joints made by automatic continuous flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2011)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2011)
Technology of heat treatment of Cl.56 steel pipe joints made by the flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2013)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2013)
Analysis of conditions of initiation and propagation of corrosion cracks in the zone of circumferential joints of main gas pipelines
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
Stress-strain state of polymer pipe welded joints made by butt welding under angle
von: E. S. Nikonova, et al.
Veröffentlicht: (2009)
von: E. S. Nikonova, et al.
Veröffentlicht: (2009)
Residual stresses and mechanical properties of turbine blades after laser treatment of surface
von: Ja. Dzjankhua, et al.
Veröffentlicht: (2010)
von: Ja. Dzjankhua, et al.
Veröffentlicht: (2010)
Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021)
Efficiency of different methods of strengthening treatment of welded joints
von: V. A. Degtjarev
Veröffentlicht: (2017)
von: V. A. Degtjarev
Veröffentlicht: (2017)
Effect of residual stresses in welded joints of two-layer steels on in-service reliability of metal structures
von: V. V. Chigarev, et al.
Veröffentlicht: (2013)
von: V. V. Chigarev, et al.
Veröffentlicht: (2013)
Determination of the residual life of the oil pipe taking into account material degradation
von: O. Y. Andreikiv, et al.
Veröffentlicht: (2024)
von: O. Y. Andreikiv, et al.
Veröffentlicht: (2024)
Residual stresses in thin-sheet zinc-coated steel joints after arc welding and plasma brazing
von: S. V. Maksymova, et al.
Veröffentlicht: (2020)
von: S. V. Maksymova, et al.
Veröffentlicht: (2020)
Effect of cooling mode after diffusion welding and brazing on residual stresses in graphite—copper edge joints
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2015)
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Calculation of parameters of explosion treatment for reduction of residual stresses in circumferential welds of pipelines
von: A. G. Bryzgalin
Veröffentlicht: (2013) -
Mathematical modeling of residual stress relaxation during performance of postweld heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2023) -
Widening of technological capabilities of explosion treatment for reduction of residual stresses in welded joints of decomposers of up to 5000 m3 volume
von: L. M. Lobanov, et al.
Veröffentlicht: (2009) -
Effect of preliminary deforming and electrodynamic treatment on stressed state of circumferential welded joints of alloy AMg6
von: L. M. Lobanov, et al.
Veröffentlicht: (2013) -
Influence of pulsed electromagnetic field treatment on stressed and deformed state of circumferential welded joints of aluminum AMg6 alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2020)