Buchumschlag

Effect of dispersity of charge materials on processes of aluminothermics in ferrotitanium melting

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	D. A. Kazarin, N. P. Volkotrub, M. I. Prilutskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000473895
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Increasing the efficiency of the introduction of the disperse material into the melt under laser treatment conditions
von: A. M. Tymoshenko
Veröffentlicht: (2018)

Development of Thermal Technology for Dispersed Materials Processing
von: K. P. Kostohryz, et al.
Veröffentlicht: (2019)

Shape and geometric sizes of rapid-hardening materials produced by dispersion from melt in IMSM
von: D. A. Kalashnik, et al.
Veröffentlicht: (2016)

Investigation of Furnace Charge Particles Melting Process in a Submersible Combustion Melter
von: V. V. Kolesnik, et al.
Veröffentlicht: (2015)

Technology of smelting of heat-resistant alloys in the vacuum induction furnace
von: N. P. Volkotrub, et al.
Veröffentlicht: (2014)

Model charged cylindrical nanopore in a colloidal dispersion: charge reversal, overcharging and double overcharging
von: González-Tovar, E., et al.
Veröffentlicht: (2017)

Investigation of the dispersion processes of composite colloidal capillary-porous materials
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019)

Some peculiarities in design of devices for metal melt dispersion
von: V. A. Shapovalov, et al.
Veröffentlicht: (2009)

Investigation of dispersion of dissimilar wire materials in the process of electric arc spraying
von: Ju. S. Borisov, et al.
Veröffentlicht: (2013)

Plasma-arc melting on dispersed substrate in mobile horizontal mould
von: V. N. Koleda, et al.
Veröffentlicht: (2012)

Effect of continuity violation of material in the form of dispersed microcracks on electroelastic parameters of piezoceramics
von: D. V. Babich, et al.
Veröffentlicht: (2015)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
von: V. I. Dubodelov, et al.
Veröffentlicht: (2015)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
von: V. I. Dubodelov, et al.
Veröffentlicht: (2015)

Pulsing MHD processing of aluminium melts by controlled pinch-effect
von: M. A. Slazhniev, et al.
Veröffentlicht: (2013)

Fundamental approaches in mathematical modeling of drying processes of capillary-porous and dispersed materials
von: B. Haivas
Veröffentlicht: (2017)

Preparation of disperse powders of VI-B group metals silicides by halogenide-oxide melts electrolysis
von: V. V. Malyshev, et al.
Veröffentlicht: (2016)

Effect of electron emission processes on macroparticle charging in plasma systems with electron beam
von: Romashchenko, E.V., et al.
Veröffentlicht: (2020)

Effect of the filler dispersity on mechanical and electrical properties of the fluoroplastic-thermally exfoliated graphite nanocomposite material
von: S. L. Revo, et al.
Veröffentlicht: (2013)

Comparative analysis of blast furnace melt indices with use of pellets with different basicity in charge
von: V. P. Rusckikh, et al.
Veröffentlicht: (2015)

The effect of the volume fraction and dispersion of tungsten particles on the electrical resistance of heterogeneous copper-based material
von: T. A. Epifantseva, et al.
Veröffentlicht: (2018)

Effect of heating rate on oxidation process of fine-dispersed ZnS:Mn obtained by SHS
von: Yu. Yu. Bacherikov, et al.
Veröffentlicht: (2015)

Effect of heating rate on oxidation process of fine-dispersed ZnS:Mn obtained by SHS
von: Bacherikov, Yu.Yu., et al.
Veröffentlicht: (2015)

Optimization of plasma-arc melting of ferroalloys from wastes of refractory and highlyreaction metals on dispersed substrate
von: V. N. Koleda, et al.
Veröffentlicht: (2013)

Effect of fourth-order dispersion on solitonic interactions
von: K. Khelil, et al.
Veröffentlicht: (2020)

Effect of fourth-order dispersion on solitonic interactions
von: K. Khelil, et al.
Veröffentlicht: (2020)

Producing of rapidly hardened alloys by the method of dispersion during induction melting in a sectional mould
von: V. A. Shapovalov, et al.
Veröffentlicht: (2009)

Wetting of various materials by melts of silver chloride
von: V. P. Krasovskij, et al.
Veröffentlicht: (2017)

Problems and prospects of studying the processes of selective laser melting of materials for aerospace engineering (Review)
von: M. V. Sokolovskyi
Veröffentlicht: (2022)

Spin and charge effects caused by positively charged acceptors in GaAs/AlGaAs quantum wells
von: P. V. Petrov, et al.
Veröffentlicht: (2015)

Effect of hydrothermal treatment on dispersity and magnetic characteristics of synthetic magnetite
von: P. P. Horbyk, et al.
Veröffentlicht: (2011)

Surface modification of basalt fibers, oxide and carbon materials for improvement their wetting with low-melting melts
von: V. P. Krasovskyi, et al.
Veröffentlicht: (2022)

Research of agency of thermal processing temperature, charge composition on density of metallized tungsten-contain material
von: A. S. Petrishchev
Veröffentlicht: (2015)

Tribological properties of epoxi composite materials filled with dispersed particles and thermoplastic materials
von: A. V. Buketov, et al.
Veröffentlicht: (2016)

The effectiveness of the refining of aluminum alloys at different ways of gas-flux melt processing
von: A. V. Narivskij, et al.
Veröffentlicht: (2014)

On effective acceleration of charged particles in vacuum
von: Buts, V.A., et al.
Veröffentlicht: (2021)

Diamond polycrystalline composite material with dispersion-hardened nickel_based additive
von: E. E. Ashkinazi, et al.
Veröffentlicht: (2013)

Impact of layered structure effects and charge ordering on thermoEMF of thermoelectric materials in a quantizing magnetic field
von: P. V. Gorsky, et al.
Veröffentlicht: (2013)

Influence of dielectric characteristics of the processed material, polishing powder and dispersed system on the energy of their interaction during polishing of optical surfaces
von: Yu. D. Filatov, et al.
Veröffentlicht: (2022)

Mechanical properties of dispersed and laminar composite materials on copper and molybdenum base
von: N. I. Grechanjuk, et al.
Veröffentlicht: (2019)

Significant technology of desulfurization and degassing pig iron dispersed by treating it with magnesium injected to the melt in the gas jet
von: A. S. Vergun, et al.
Veröffentlicht: (2015)