Buchumschlag

Investigation of effect of calcium fluoride on power-technological characteristics of wheel steel treatment in ladle-furnace installation

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	G. A. Esaulov, M. I. Gasik, A. P. Gorobets, Ju. V. Klimchik
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000473985
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Development of technology of ladle treatment of electric steel by using pegmatite as substitute for fluorspar
von: V. N. Kornievskij, et al.
Veröffentlicht: (2015)

Zirconium Concentrate Autoclave Decomposition at the Presence of Calcium Fluoride
von: T. V. Pavlenko, et al.
Veröffentlicht: (2010)

Influence of some factors on melt mixing during treatment on AC ladle furnace of middle power
von: V. P. Piptjuk, et al.
Veröffentlicht: (2011)

The investigation of the influence of both accumulating and ladle pouring processes on the blast-furnace operation
von: V. A. Petrenko, et al.
Veröffentlicht: (2014)

Hepatotoxic action of fluoride and protective prophylactic effect of the calcium-drugs
von: A. P. Levitskij, et al.
Veröffentlicht: (2014)

Structural chemical condition of the refiner slags under ladle steel treatment
von: B. F. Belov, et al.
Veröffentlicht: (2015)

Forecast of metal finishing duration in a ladle furnace
von: N. M. Perevorochaev
Veröffentlicht: (2011)

Efficiency improving for gas removal from ladle furnace
von: S. N. Timoshenko, et al.
Veröffentlicht: (2015)

Investigation of glaze formation on the working surface of steel ladle refractories lining
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
von: I. N. Karp, et al.
Veröffentlicht: (2012)

Temperature dependence of mechanical characteristics of wheel steels
von: I. M. Andreiko, et al.
Veröffentlicht: (2011)

Experimental study of the coefficient of elasticity of the wire used for secondary steel treatment in ladles
von: V. P. Piptjuk, et al.
Veröffentlicht: (2013)

The influence of electromagnetic forces on mixing bath ladle furnace ac
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

Stirring of liquid metal in ladle furnace by pulsing magnetic field
von: Ju. M. Gorislavets, et al.
Veröffentlicht: (2016)

Testing equipment to simulate the thermal processing of the melt in the ladle furnace
von: V. P. Piptjuk, et al.
Veröffentlicht: (2015)

Contact interaction, structure and geometry (relief) of interphase boundary in calcium fluoride –– metal melt
von: V. P. Krasovskyi, et al.
Veröffentlicht: (2016)

Influence of content of alloying elements and heat treatment on resource characteristics of high-strength wheel steels during manufacture of railway wheels and their repair during surfacing
von: O. P. Ostash, et al.
Veröffentlicht: (2020)

Numerical study of melt hydrodynamics in D.C. ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2014)

Improvement of electric and technological modes of metal finishing in a ladle furnace
von: N. M. Perevorochaev, et al.
Veröffentlicht: (2011)

Numerical modeling of high-current arc discharge in DC ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2013)

A new approach to solving the problem of directional formation of final melts during steel debugging at a ladle-furnace unit
von: D. M. Tohobytska, et al.
Veröffentlicht: (2021)

Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
von: N. I. Zakharov, et al.
Veröffentlicht: (2014)

The influence of higher Si and Mn content on operation characteristics of wheel steel
von: V. V. Kulyk, et al.
Veröffentlicht: (2019)

Features of mass transfer in bath of dc ladle furnace unit with capacity 140 tons
von: V. P. Piptjuk, et al.
Veröffentlicht: (2012)

Standard and New Wheeled Steel
von: V. A. Loktionov-Remizovskij, et al.
Veröffentlicht: (2019)

Preparing the equipment for physical modeling of processes in the melt treatment ladle
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
von: P. A. Plokhikh, et al.
Veröffentlicht: (2018)

Development of technology of melting and ladle treatment of steel using programming complex &quot;DesigningMelt&quot;
von: R. V. Sinjakov
Veröffentlicht: (2011)

Effect of hot plastic deformation and heat treatment on structure and mechanical properties of steels for railway wheels
von: A. I. Babachenko, et al.
Veröffentlicht: (2012)

Selecting the heating temperature during heat treatment strengthens micro alloyed steel railway wheels
von: A. I. Babachenko, et al.
Veröffentlicht: (2015)

Interaction of rare-earth fluorides with metals in a molten sodium fluoride-zirconium fluoride mixture
von: Savchuk, R.M., et al.
Veröffentlicht: (2005)

Optimization of the refractory lining for ferromanganese production furnace
von: M. M. Gasik
Veröffentlicht: (2024)

Physicochemical prerequisites for the development of complex relationships between the properties of metallurgical melts in order to predict the regularities of the distribution of elements during the finishing of steel on a ladle furnace
von: I. R. Snihura, et al.
Veröffentlicht: (2020)

The influence of cavitation treatment on physicochemical properties of calcium hydroyxide
von: V. T. Yavorskyi, et al.
Veröffentlicht: (2013)

Effectiveness of calcium hopantenate in treatment of cognitive impairments at epilepsy
von: I. A. Grigorova, et al.
Veröffentlicht: (2017)

Features of steel and slag mixing in a ladle during argon stirring
von: O. M. Smirnov, et al.
Veröffentlicht: (2009)

Corrosion fatigue fracture of steels of railway wheels
von: I. M. Andreiko, et al.
Veröffentlicht: (2011)

Experimental Investigations of Multiblade Wind Wheel Model
von: I. A. Shedlovskij
Veröffentlicht: (2017)

Research of the influence of thermoanthracite calcination modes for the production of continuous self-baking electrodes for ore reducing furnaces
von: S. V. Kutuzov, et al.
Veröffentlicht: (2020)

Synthesis and investigation of phosphatoborates calcium with apatite-type structure
von: Yu. Strutynska, et al.
Veröffentlicht: (2014)