Rheokinetics of in situ formation of aerosil filled poly(methyl methacrylate)–polyurethane blend
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | V. F. Shumskij, L. F. Kosjanchuk, T. D. Ignatova, Ju. P. Gomza, I. P. Getmanchuk, O. I. Antonenko, O. V. Babich, S. D. Nesin, Ju. V. Maslak |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2014
|
| Назва видання: | Polymer journal |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000508644 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Effect of molecular mass of oligoester block of polyurethane and the ratio of components on the rheokinetic characteristics and mechanical properties of a poly(methyl methacrylate)/polyurethane blend
за авторством: V. F. Shumskij, та інші
Опубліковано: (2017)
за авторством: V. F. Shumskij, та інші
Опубліковано: (2017)
Interfacial region in the filled polymer blends of linear polyurethans with poly(methyl methacrylate) formed in situ
за авторством: T. D. Ignatova, та інші
Опубліковано: (2012)
за авторством: T. D. Ignatova, та інші
Опубліковано: (2012)
Peculiarities of phase separation in unfilled and filled blends of poly(methyl methacrylate) with poly(butyl methacrylate)
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011)
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011)
Effect of molecular mass of oligoester block and the ratio of components on the formation process of poly(methyl methacrylate)/polyurethane semi-IPN
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2014)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2014)
Effect of surface nature of nanofiller on the in situ formation and morphology of a poly(methyl methacrylate)/polyurethane blend
за авторством: V. P. Shumskyi, та інші
Опубліковано: (2019)
за авторством: V. P. Shumskyi, та інші
Опубліковано: (2019)
Rheokinetic and morphological features of the reaction formation of a polymer compo-site material based on impact-resistant poly(methyl methacrylate). Model and applied aspects
за авторством: V. F. Shumsky, та інші
Опубліковано: (2021)
за авторством: V. F. Shumsky, та інші
Опубліковано: (2021)
The viscoelastic properties of the poly(methyl methacrylate) modified by polyurethane with different molecular weight of oligoester block
за авторством: N. V. Babkina, та інші
Опубліковано: (2017)
за авторством: N. V. Babkina, та інші
Опубліковано: (2017)
Structure of nanocomposites based on polyurethane/poly(2-hydroxy ethyl methacrylate) semi-IPNS and MWCNT
за авторством: L. V. Karabanova, та інші
Опубліковано: (2012)
за авторством: L. V. Karabanova, та інші
Опубліковано: (2012)
Studying of the nanostructurized poly(urethane-urea) – poly(vinyl chloride) blend modified by aerosils
за авторством: T. L. Malysheva, та інші
Опубліковано: (2022)
за авторством: T. L. Malysheva, та інші
Опубліковано: (2022)
Energy transfer in scintillation composition on the base of poly(methyl methacrylate)
за авторством: Khakhel, O.A., та інші
Опубліковано: (2006)
за авторством: Khakhel, O.A., та інші
Опубліковано: (2006)
The study of intermolecular interactions in the poss-containing nanocomposites based on polyurethane and polyurethane/poly(hydroxypropyl methacrylate) matrices
за авторством: L. V. Karabanova, та інші
Опубліковано: (2022)
за авторством: L. V. Karabanova, та інші
Опубліковано: (2022)
The structure of hydrophobic aerosil in a hydrocarbon medium. The effect of shear field
за авторством: I. P. Getmanchuk, та інші
Опубліковано: (2019)
за авторством: I. P. Getmanchuk, та інші
Опубліковано: (2019)
Biocompatible nanocomposites based on polyurethane-poly(2-hydroxyethyl methacrylate) matrix and filler modified by biologically active amino acid glycine: structure and thermodynamics of interactions
за авторством: L. V. Karabanova, та інші
Опубліковано: (2016)
за авторством: L. V. Karabanova, та інші
Опубліковано: (2016)
Polymer blends based on polyurethane ionomer and chitosan
за авторством: S. Kobylinskyy, та інші
Опубліковано: (2017)
за авторством: S. Kobylinskyy, та інші
Опубліковано: (2017)
Structural features and porosity of the POSS-containing nanocomposites based on polyurethane-poly(hydroxypropyl methacrylate) matrix, which is formed by the principle of sequential IPNs
за авторством: L. V. Karabanova, та інші
Опубліковано: (2019)
за авторством: L. V. Karabanova, та інші
Опубліковано: (2019)
The thermodynamics of interactions and relaxation properties of the poss-containing nanocomposites based on polyurethane-poly(hydroxypropyl methacrylate) matrix, which is formed by the principle of IPNs
за авторством: L. V. Karabanova, та інші
Опубліковано: (2021)
за авторством: L. V. Karabanova, та інші
Опубліковано: (2021)
Peculiarities permolecular structure of polyvinylchloride—polyurethane elastomers blends
за авторством: T. L. Malysheva, та інші
Опубліковано: (2011)
за авторством: T. L. Malysheva, та інші
Опубліковано: (2011)
The viscoelastic properties of the organic-inorganic IPN based on polyurethane, poly(hydroxyethyl methacrylate) and polу(titanium oxide), obtained by sol-gel method
за авторством: N. V. Babkina, та інші
Опубліковано: (2016)
за авторством: N. V. Babkina, та інші
Опубліковано: (2016)
Miscibility of the polyurethane elastomer with poly(vinyl chloride)
за авторством: T. L. Malysheva, та інші
Опубліковано: (2019)
за авторством: T. L. Malysheva, та інші
Опубліковано: (2019)
The features of structure forming in the blends of polypropylene – plastified poly(vinyl alcohol)
за авторством: L. S. Dziubenko, та інші
Опубліковано: (2016)
за авторством: L. S. Dziubenko, та інші
Опубліковано: (2016)
Features of kinetics polymerization of methyl methacrylate initiated by hydroperoxides -N, N-diethyldithiocarbamates of copper (II) systems
за авторством: A. V. Hrekova, та інші
Опубліковано: (2022)
за авторством: A. V. Hrekova, та інші
Опубліковано: (2022)
Quantum chemical modeling of adsorption complexes of fragment of poly(2 hydroxyethyl methacrylate) on silica surface
за авторством: Ye. M. Demianenko, та інші
Опубліковано: (2016)
за авторством: Ye. M. Demianenko, та інші
Опубліковано: (2016)
Synthesis of surface-active cholesterylcontaining copolymers based on poly(maleic anhydride-co-ethyltrioxyethylene methacrylate)
за авторством: Z. I. Demchuk, та інші
Опубліковано: (2015)
за авторством: Z. I. Demchuk, та інші
Опубліковано: (2015)
Structure and properties of interpenetrating polymer networks containing poly(titanium oxide) obtained in 2-hydroxyethyl methacrylate medium
за авторством: T. T. Aleksieieva, та інші
Опубліковано: (2018)
за авторством: T. T. Aleksieieva, та інші
Опубліковано: (2018)
Temperaturesensitive "non-fouling" nanolayers based on poly( ω-ethyltriethylenglycol-α-methacrylate)
за авторством: Yu. B. Stetsyshyn, та інші
Опубліковано: (2013)
за авторством: Yu. B. Stetsyshyn, та інші
Опубліковано: (2013)
The influence of the phenalenone dyes on the polyurethanes formation
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
Effect of modified aerosil on the formation process, viscoelastic and mechanical properties of polymer matrices based on PMMA/PU IPNs
за авторством: L. F. Kosianchuk, та інші
Опубліковано: (2019)
за авторством: L. F. Kosianchuk, та інші
Опубліковано: (2019)
Influence of diisocyanate component on dynamic characteristics of polyurethanes with phenalenone dyes
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
The influence of ratio of reagents on the rheokinetics and viscoelastic properties of epoxy resin cured with amine hardener
за авторством: M. H. Tkalich, та інші
Опубліковано: (2015)
за авторством: M. H. Tkalich, та інші
Опубліковано: (2015)
Deagglomeration of aerosil in polishing suspension for chemical-mechanical polishing of sapphire
за авторством: Vovk, E.A.
Опубліковано: (2015)
за авторством: Vovk, E.A.
Опубліковано: (2015)
Chemical-mechanical polishing of sapphire by polishing suspension based on aerosil
за авторством: Vovk, E.A.
Опубліковано: (2015)
за авторством: Vovk, E.A.
Опубліковано: (2015)
About the interaction of 6-aminophenolenone with polyurethane matrix
за авторством: M. S. Stratilat, та інші
Опубліковано: (2014)
за авторством: M. S. Stratilat, та інші
Опубліковано: (2014)
Rheological characteristic of hydrophobic aerosol dispersions in the hydrocarbon medium. Rheopexy and a percolation threshold
за авторством: V. F. Shumskij, та інші
Опубліковано: (2018)
за авторством: V. F. Shumskij, та інші
Опубліковано: (2018)
The influence of the phenalenone dyes on the kinetics of the polyurethanes formation with different nature of the diisocyanate unit
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
Influence of nano-filler on the mechanism of crystallization of systems based on polypropylene and aerosil
за авторством: R. V. Dinzhos, та інші
Опубліковано: (2019)
за авторством: R. V. Dinzhos, та інші
Опубліковано: (2019)
Silica effects on spectral and photophysical properties of rhodamine 6G in polyurethane matrix
за авторством: T. V. Bezrodna, та інші
Опубліковано: (2019)
за авторством: T. V. Bezrodna, та інші
Опубліковано: (2019)
Features of thermal and vyazkouprugoo behavior formed in situ filled with mixtures of linear polyurethane and polystyrene
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2013)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2013)
Effect of the chemical nature of the components to process of formation in situ of binary mixtures of linear imcompatibility polymers
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011)
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011)
Damping efficiency of two-layer polyurethane composites
за авторством: N. V. Babkina, та інші
Опубліковано: (2021)
за авторством: N. V. Babkina, та інші
Опубліковано: (2021)
Ultraviolet protection and damping ability of transparent polyurethane materials with the components of different chemical nature
за авторством: N. V. Babkina, та інші
Опубліковано: (2022)
за авторством: N. V. Babkina, та інші
Опубліковано: (2022)
Схожі ресурси
-
Effect of molecular mass of oligoester block of polyurethane and the ratio of components on the rheokinetic characteristics and mechanical properties of a poly(methyl methacrylate)/polyurethane blend
за авторством: V. F. Shumskij, та інші
Опубліковано: (2017) -
Interfacial region in the filled polymer blends of linear polyurethans with poly(methyl methacrylate) formed in situ
за авторством: T. D. Ignatova, та інші
Опубліковано: (2012) -
Peculiarities of phase separation in unfilled and filled blends of poly(methyl methacrylate) with poly(butyl methacrylate)
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011) -
Effect of molecular mass of oligoester block and the ratio of components on the formation process of poly(methyl methacrylate)/polyurethane semi-IPN
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2014) -
Effect of surface nature of nanofiller on the in situ formation and morphology of a poly(methyl methacrylate)/polyurethane blend
за авторством: V. P. Shumskyi, та інші
Опубліковано: (2019)