Buchumschlag

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	M. Enek, E. Feldshtejn
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Metallophysics and advanced technologies
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000550096
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
von: N. E. Stakhniv
Veröffentlicht: (2017)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Tribological properties of vacuum arc Cr-O-N coatings in macro- and microscale
von: Kuprin, A.S., et al.
Veröffentlicht: (2016)

Multicomponent coatings for precise tribological pairs working in friction assembly of machine building and aviation
von: A. V. Sagalovich, et al.
Veröffentlicht: (2007)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts
von: Anshuman Das, et al.
Veröffentlicht: (2019)

The correlation model of acoustic emission in fine diamond turning
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Determination of tribological properties of multilayer coatings based on nitrides
von: J. Brezinová, et al.
Veröffentlicht: (2022)

Influence of the nanostructure of surface ceramic coatings on their tribological properties
von: W. Skoneczny
Veröffentlicht: (2014)

Influence of the nanostructure of surface ceramic coatings on their tribological properties
von: Skoneczny, W.
Veröffentlicht: (2014)

Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
von: K. S. Barandych, et al.
Veröffentlicht: (2018)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
von: L. V. Sudnik, et al.
Veröffentlicht: (2017)

Tribological behavior of porous titanium after thermal oxidation
von: S. M. Lavrys, et al.
Veröffentlicht: (2021)

Characterization of tribological behavior of chromium and zinc coatings electrodeposited on a steel substrate
von: Rhaiem, S., et al.
Veröffentlicht: (2014)

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
von: Ociepa, M., et al.
Veröffentlicht: (2019)

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
von: M. Ociepa, et al.
Veröffentlicht: (2019)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

Effect of deposition parameters on microstructure and tribological properties of hard CA-PVD multi-component TiAlCrN and TiAlCrCN coatings
von: Misiruk, I.O., et al.
Veröffentlicht: (2020)

Tribological properties of carbonitride coatings formed on titanium by thermodiffusion method
von: O. I. Yaskiv, et al.
Veröffentlicht: (2011)

Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
von: Планковский, С. И., et al.
Veröffentlicht: (2016)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
von: Планковский, С. И., et al.
Veröffentlicht: (2016)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
von: S. I. Plankovskij, et al.
Veröffentlicht: (2011)

Structure and tribological characteristics of heterogeneous alloy before and after laser treatment
von: V. H. Novytskyi, et al.
Veröffentlicht: (2011)

Effect of the deposition parameters on the phase-structure state, hardness, and tribological characteristics of Mo2N/CrN vacuum-arc multilayer coatings
von: V. M. Beresnev, et al.
Veröffentlicht: (2016)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
von: N. E. Stakhniv, et al.
Veröffentlicht: (2019)

Mechanical and tribological characteristics of zirconium based ceramic coatings for micro-bearing application
von: Warcholinski, B., et al.
Veröffentlicht: (2014)

Microscopic fungi found on damaging indoors finishing coating materials (plaster and paint)
von: T. O. Kondratiuk, et al.
Veröffentlicht: (2011)

Shaft cutters for geological exploration
von: V. I. Spirin, et al.
Veröffentlicht: (2017)

Characteristics and properties of protecting coatings based on Ni-Cr and Co-Cr after concentrated energy flow processing
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2005)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Прогностическое значение корригированного интервала QT и мозгового натрийуретического пептида при сердечной недостаточности после инфаркта миокарда
von: Копица, Н.П.
Veröffentlicht: (2004)

An experimental study of the influence of tool material and fine turning conditions on the level of acoustic emission signals
von: L. N. Devin, et al.
Veröffentlicht: (2016)

Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
von: Nakonieczny, A., et al.
Veröffentlicht: (2012)

Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
von: A. Nakonieczny, et al.
Veröffentlicht: (2012)

Influence of the tool shape and location of cutters in it on the force distribution between the cutters at drilling gas-drainage boreholes
von: V. G. Krasnik
Veröffentlicht: (2013)