Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
Gespeichert in:
| Datum: | 2014 |
|---|---|
| Hauptverfasser: | J. Y. Lee, K. H. Kim, S. W. Kim, M. Chang |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2014
|
| Schriftenreihe: | Strength of Materials |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000576114 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)
von: Kim, J.W.
Veröffentlicht: (2016)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
Complex estimation of material degradation at the cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
Complex estimation of material degradation at the cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
Complex estimation of material degradation at the cyclic loading
von: K. V. Vakulenko, et al.
Veröffentlicht: (2017)
von: K. V. Vakulenko, et al.
Veröffentlicht: (2017)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
von: Verma, S., et al.
Veröffentlicht: (2017)
von: Verma, S., et al.
Veröffentlicht: (2017)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
The influence of mechanical and corrosion defects on strength of thermally hardened reinforcement bars of 35HS steel
von: Ya. Blikharskyi, et al.
Veröffentlicht: (2018)
von: Ya. Blikharskyi, et al.
Veröffentlicht: (2018)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: A. Buyukkaragoz, et al.
Veröffentlicht: (2013)
von: A. Buyukkaragoz, et al.
Veröffentlicht: (2013)
Exfoliation of the element of reinforcement of a half plane under cyclic loading
von: M. M. Kundrat
Veröffentlicht: (2021)
von: M. M. Kundrat
Veröffentlicht: (2021)
Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)
von: Zhang, J., et al.
Veröffentlicht: (2018)
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)
von: Huang, T., et al.
Veröffentlicht: (2016)
Quantitative assessment of the level of alloy AMg6 structure degradation under cyclic loading
von: Ye. Matokhniuk, et al.
Veröffentlicht: (2011)
von: Ye. Matokhniuk, et al.
Veröffentlicht: (2011)
Specificities of Estimating the Effect of Load Asymmetry on Fatigue Strength and Cyclic Durability
von: А. D. Pogrebnyak
Veröffentlicht: (2024)
von: А. D. Pogrebnyak
Veröffentlicht: (2024)
Strength of the steel fiber concrete elements with a circular cut under single loading
von: Ye. M. Babych, et al.
Veröffentlicht: (2016)
von: Ye. M. Babych, et al.
Veröffentlicht: (2016)
Nano-sized phase inclusions in As₂S₃ glass, films and fibers based on this glass
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
von: A. I. Burja, et al.
Veröffentlicht: (2017)
von: A. I. Burja, et al.
Veröffentlicht: (2017)
Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
The stress state of the viscoelastic layer on the rigid base subjected to concentrated cyclic load
von: I. S. Skorodynskyi, et al.
Veröffentlicht: (2020)
von: I. S. Skorodynskyi, et al.
Veröffentlicht: (2020)
The technological decision of manufacturing of a forming tool on ceramic reinforced bars
von: O. I. Voronova
Veröffentlicht: (2018)
von: O. I. Voronova
Veröffentlicht: (2018)
Prediction of defect types at flash-butt welding of concrete reinforcement bars
von: S. K. Fomichov, et al.
Veröffentlicht: (2011)
von: S. K. Fomichov, et al.
Veröffentlicht: (2011)
"Reverse Gradualism", Investment Collapse and Monetary Degradation in Russia in the 1990s
von: Rozmainsky, I.V.
Veröffentlicht: (2014)
von: Rozmainsky, I.V.
Veröffentlicht: (2014)
Static and fatigue strength of basalt reinforcement
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
Modern trends in the production of corrosion-resistant and fire-resistant prestressing reinforcing bars
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2021)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2021)
Effect of thermodynamic cyclic loads for high-strength diamond wear mechanism destroying mountain breed
von: A. M. Isonkin, et al.
Veröffentlicht: (2019)
von: A. M. Isonkin, et al.
Veröffentlicht: (2019)
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
Modern trends in the production of corrosion-resistant and fire-resistant stress-free reinforcing bars
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2020)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2020)
Cyclic strength of damaged tee joint
von: P. S. Jukhimets, et al.
Veröffentlicht: (2015)
von: P. S. Jukhimets, et al.
Veröffentlicht: (2015)
Assessment of strength and deformation of heat-strengthened reinforcement
von: Ya. Z. Blikharskyi, et al.
Veröffentlicht: (2020)
von: Ya. Z. Blikharskyi, et al.
Veröffentlicht: (2020)
The Structural Strength of Glass: Hidden Damage
von: Veera, F.A., et al.
Veröffentlicht: (2011)
von: Veera, F.A., et al.
Veröffentlicht: (2011)
Cetyltrimethylammonium chloride influence on silica optical fiber strength
von: El Abdi, R., et al.
Veröffentlicht: (2013)
von: El Abdi, R., et al.
Veröffentlicht: (2013)
Technological strength and analysis of causes of weldability degradation and cracking
von: V. V. Derlomenko, et al.
Veröffentlicht: (2010)
von: V. V. Derlomenko, et al.
Veröffentlicht: (2010)
Research and development of structures of single-row rope-profile guides for movement of vehicles in bar reinforcement
von: A. O. Rubel, et al.
Veröffentlicht: (2022)
von: A. O. Rubel, et al.
Veröffentlicht: (2022)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)
von: A. I. Burja, et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014) -
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016) -
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015) -
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016) -
Complex estimation of material degradation at the cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)