Buchumschlag

Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	X. L. Fan, W. J. Qin, T. Suo
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Strength of Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000576119
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)

Investigation of influence of plasticity materials on tensile strength of the composite joint
von: M. V. Dudyk, et al.
Veröffentlicht: (2013)

Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)

The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: X. He, et al.
Veröffentlicht: (2013)

Effects warmly and formcreature of opening at boring of laminates
von: L. M. Murzin, et al.
Veröffentlicht: (2009)

Tensile Fracture Analysis of Key-Hole Notches by Means of the Strain Energy Density
von: Torabi, A.R., et al.
Veröffentlicht: (2016)

Long-term strength of the elastic containing an elliptical crack filled with visco-elastic material
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2012)

Performance of laminated contact material Cu—Mo in open air AC low voltage contactors
von: B. Miedzinski, et al.
Veröffentlicht: (2014)

Dynamic tensile strength of ceramic-matrix composites of the BL group, which are obtained in the cBN–carbide–Al systems
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2024)

Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)

Effect of the SiC Particle Orientation Anisotropy on the Tensile Properties of a Spray-Formed SiCp/Al-Si Composite
von: W. Li, et al.
Veröffentlicht: (2014)

Fabrication of laminated metal-intermetallic reinforced composite material
von: I. M. Huriia, et al.
Veröffentlicht: (2019)

Effect of the SiC Particle Orientation Anisotropy on the Tensile Properties of a Spray-Formed SiCp/Al-Si Composite
von: Li, W., et al.
Veröffentlicht: (2014)

Strength of Composite Transport and Launch Container for Rocket Launch
von: Аврамов, К. В., et al.
Veröffentlicht: (2024)

Strength of Composite Transport and Launch Container for Rocket Launch
von: Аврамов, К. В., et al.
Veröffentlicht: (2024)

Strength of Composite Transport and Launch Container for Rocket Launch
von: K. V. Avramov, et al.
Veröffentlicht: (2023)

Mechanical and thermophysical properties of fumarate-containing epoxy-polyurethane composite materials filled by ferrocene
von: T. V. Rudenchyk, et al.
Veröffentlicht: (2013)

Experimental study on fabricating micro-hole arrays on CVD diamond film using a nanosecond pulsed laser
von: J. Wang, et al.
Veröffentlicht: (2021)

Thermal transformation of polydimethylsiloxane filled with initial and zirconia containing silicas
von: Ja. Sulim, et al.
Veröffentlicht: (2014)

Nearsurface buckling in laminate composite material with imperfect interlayer contact
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Z. Y. Han, et al.
Veröffentlicht: (2014)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)

Parametric vibrations of laminated plates of complex form
von: L. V. Kurpa, et al.
Veröffentlicht: (2013)

Microstrip Antenna Arrays with Laminated Dielectric Covering
von: Seleznev, D. G., et al.
Veröffentlicht: (2013)

Determination of critical parameters in the problem of stability of elements of constructions from composite laminate
von: V. S. Zelenskij, et al.
Veröffentlicht: (2018)

Stress and Delamination Analysis on Overlapped-Grouped and Overlapped-Dispersed Tapered Composite Laminate
von: G. Chaudhary, et al.
Veröffentlicht: (2022)

Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)

Microfractography of tensile tests surfaces of welded joints of austenitic and ferritic steels
von: B. Nasiłowska, et al.
Veröffentlicht: (2018)

The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
von: Stamenović, М., et al.
Veröffentlicht: (2011)

The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
von: M. Stamenović, et al.
Veröffentlicht: (2011)

Flatwise Compression Strength and Energy Absorption of Polyurethane Foam-Filled Lattice Core Sandwich Panels
von: Rostamiyan, Y., et al.
Veröffentlicht: (2016)

Mechanized welding of laminated PVC fabrics with heated air
von: M. H. Korab, et al.
Veröffentlicht: (2020)

Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004)

Influence of acyl radicals and their ratio in the structure of the device containing titanium on the properties of filled polypropylene
von: P. I. Bashtanyk, et al.
Veröffentlicht: (2016)

Experimental study on fabricating micro-hole arrays on CVD diamond film using a nanosecond pulsed laser
von: Ya. Liao, et al.
Veröffentlicht: (2021)

On the propagation of axisymmetric waves in laminated composite compressible materials with initial stresses at the slipping of layers
von: Yu. Hlukhov
Veröffentlicht: (2016)

Axisymmetric waves in laminated composite incompressible materials with initial stresses under the slipping of layers
von: Yu. Hlukhov
Veröffentlicht: (2016)

Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Rostamiyan, Y., et al.
Veröffentlicht: (2013)

Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013)

Calculation of theoretical strength of metals and experimental approbation
von: B. K. Hanulich, et al.
Veröffentlicht: (2020)