Modification of epoxy binder polymer composite by multilayer carbon nanotubes
Gespeichert in:
| Datum: | 2014 |
|---|---|
| Hauptverfasser: | D. V. Onishchenko, A. E. Protsenko, V. V. Petrov |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2014
|
| Schriftenreihe: | Materials Science (Physicochemical mechanics of materials) |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000662113 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Modification of cement-concrete mixtures with polymer additives, structured carbon nanotubes
von: V. V. Trachevskyi, et al.
Veröffentlicht: (2022)
von: V. V. Trachevskyi, et al.
Veröffentlicht: (2022)
Influence of noncovalent modification of carbon nanotubes by polyethylene glycol on their distribution in the polymer matrix
von: E. Lysenkov, et al.
Veröffentlicht: (2022)
von: E. Lysenkov, et al.
Veröffentlicht: (2022)
Microwave Properties and Conductivity Anisotropy of Oriented Multiwalled Carbon Nanotube/Epoxy Composites
von: Vovchenko, L.L., et al.
Veröffentlicht: (2016)
von: Vovchenko, L.L., et al.
Veröffentlicht: (2016)
Thermal destruction of epoxy polymers and epoxy-silica composites cured with anhydride in the presence of metal acetylacetonates
von: A. A. Lugovaja, et al.
Veröffentlicht: (2013)
von: A. A. Lugovaja, et al.
Veröffentlicht: (2013)
Viscoelastic and thermal properties of epoxy polymers and epoxy-silica composites cured with anhydride in the presence of metal acetylacetonates
von: A. A. Lugovaja, et al.
Veröffentlicht: (2012)
von: A. A. Lugovaja, et al.
Veröffentlicht: (2012)
Study of the structural features of multilayer carbon nanotubes by X-ray analysis
von: E. A. Lysenkov, et al.
Veröffentlicht: (2015)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2015)
Modelling of the structural relaxation in the glassing area of polymer composite materials filled by carbon nanotubes
von: R. Dinzhos, et al.
Veröffentlicht: (2015)
von: R. Dinzhos, et al.
Veröffentlicht: (2015)
Modification of bituminous binders for asphalt concrete pavements
von: V. V. Trachevskyi, et al.
Veröffentlicht: (2021)
von: V. V. Trachevskyi, et al.
Veröffentlicht: (2021)
Viscoelastic, thermophisics and relaxation properties of the nanofilled composites based on epoxy polymer
von: V. V. Korskanov, et al.
Veröffentlicht: (2015)
von: V. V. Korskanov, et al.
Veröffentlicht: (2015)
Simulation of the Percolation Behavior of the Properties of Polymer Nanocomposites Filled with Carbon Nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2022)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2022)
Structure, thermophysical properties and electrical conductivity of nanocomposites based on epoxy polymer and carbon tubes
von: V. V. Korskanov, et al.
Veröffentlicht: (2021)
von: V. V. Korskanov, et al.
Veröffentlicht: (2021)
Structural features of polymer nanocomposites based on polypropylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2015)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2015)
Properties of polyethylene–carbon nanotubes composites
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2017)
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2017)
Electrophysical properties of composites based on epoxy resin and carbon fillers
von: O. G. Sirenko, et al.
Veröffentlicht: (2021)
von: O. G. Sirenko, et al.
Veröffentlicht: (2021)
Electrical conductivity of polymer/carbon nanotubes nanocomposites at low temperatures
von: L. Bardash, et al.
Veröffentlicht: (2018)
von: L. Bardash, et al.
Veröffentlicht: (2018)
Structure and properties of polymer composites based on epoxy polymer, polyaniline, and Al(III) or Fe(III) metal oxide
von: V. I. Shtompel, et al.
Veröffentlicht: (2012)
von: V. I. Shtompel, et al.
Veröffentlicht: (2012)
Surface properties of composite compacts based on diamond of AC 6 grade with carbon binder
von: V. H. Poltoratskyi, et al.
Veröffentlicht: (2017)
von: V. H. Poltoratskyi, et al.
Veröffentlicht: (2017)
Structure-property relationships in polymer nanocomposites based on cross-linked polyurethanes and carbon nanotubes
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
Positron Spectroscopy of Polytetrafluoroethylene—Carbon Nanotubes Composites
von: M. M. Nyshchenko, et al.
Veröffentlicht: (2013)
von: M. M. Nyshchenko, et al.
Veröffentlicht: (2013)
MODIFICATION OF TUBULAR CERAMIC MEMBRANES BY PYROCARBON FROM CARBONIZED POLYMERS
von: Goncharuk, Vladislav, et al.
Veröffentlicht: (2019)
von: Goncharuk, Vladislav, et al.
Veröffentlicht: (2019)
Adsorption of glycine and its influence on an electrokinetic potential and stability of suspensions of multilayer carbon nanotubes
von: M. V. Manilo
Veröffentlicht: (2015)
von: M. V. Manilo
Veröffentlicht: (2015)
Oxygen reduction electrocatalysts based on multilayer carbon nanotubes modified with cobalt and nickel oxide
von: O. S. Krupennikova, et al.
Veröffentlicht: (2013)
von: O. S. Krupennikova, et al.
Veröffentlicht: (2013)
Reinforcement of epoxy polymers with hydride-silylated fumed silica
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
Calorimetric study on relaxation characteristics of epoxy polymers
von: Tulzhenkova, O.S., et al.
Veröffentlicht: (2017)
von: Tulzhenkova, O.S., et al.
Veröffentlicht: (2017)
The influence of carbon nanotubes on the sensitivity of humidity sensors based on organic-inorganic polymer materials
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
Simulation of the Percolation Behavior of the Properties of Polymer Nanocomposites Filled with Carbon Nanotubes
von: Лисенков, Едуард, et al.
Veröffentlicht: (2022)
von: Лисенков, Едуард, et al.
Veröffentlicht: (2022)
Recycling, modification and development of new composite materials based on polymer waste
von: V. V. Semynoh, et al.
Veröffentlicht: (2022)
von: V. V. Semynoh, et al.
Veröffentlicht: (2022)
Morphology and tribological properties of radiation modification polymernanocomposites based on high molecular polytetrafluoroethylene and carbon nanotube
von: N. V. Sadovskaja, et al.
Veröffentlicht: (2012)
von: N. V. Sadovskaja, et al.
Veröffentlicht: (2012)
Low energy compositions based on inorganic binders
von: V. V. Hlukhovskyi, et al.
Veröffentlicht: (2019)
von: V. V. Hlukhovskyi, et al.
Veröffentlicht: (2019)
Perspective binders of complex oligophenylenes compounds with metals for the development of composites on the basis of hybrid structured polymer systems with adaptive behaviour
von: Ye. O. Pashchenko, et al.
Veröffentlicht: (2023)
von: Ye. O. Pashchenko, et al.
Veröffentlicht: (2023)
Influence of the introduction method of the filler on thermophysical properties of the systems based on thermoplastic polymers and carbon nanotubes
von: R. V. Dinzhos, et al.
Veröffentlicht: (2014)
von: R. V. Dinzhos, et al.
Veröffentlicht: (2014)
Aluminosilicate nanotubes modification with cerium dioxide
von: Ja. Brichka, et al.
Veröffentlicht: (2013)
von: Ja. Brichka, et al.
Veröffentlicht: (2013)
Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
von: V. G. Poltoratskij
Veröffentlicht: (2017)
von: V. G. Poltoratskij
Veröffentlicht: (2017)
Modification of ceramic membranes by carbonized organic-inorganic composites
von: V. V. Honcharuk, et al.
Veröffentlicht: (2020)
von: V. V. Honcharuk, et al.
Veröffentlicht: (2020)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Mechanochemical synthesis of multi-wall carbon nanotubes from sphagnum moss
von: D. V. Onishchenko
Veröffentlicht: (2013)
von: D. V. Onishchenko
Veröffentlicht: (2013)
Film-forming and destruction powers of compositions based on modifications of natural polymers
von: T. V. Dmytriieva, et al.
Veröffentlicht: (2022)
von: T. V. Dmytriieva, et al.
Veröffentlicht: (2022)
Formation and Properties of UV-cured Dyane Epoxy Resins and Epoxy-Acrylate Interpenetrating Polymer Networks on their Base
von: T. F. Samoilenko, et al.
Veröffentlicht: (2016)
von: T. F. Samoilenko, et al.
Veröffentlicht: (2016)
Proton conductive epoxy polymers: influence of structure on electrical properties
von: O. K. Matkovska, et al.
Veröffentlicht: (2013)
von: O. K. Matkovska, et al.
Veröffentlicht: (2013)
Electrophysical properties of carbon nanotubes/NiCo composites
von: O. M. Lisova, et al.
Veröffentlicht: (2018)
von: O. M. Lisova, et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Modification of cement-concrete mixtures with polymer additives, structured carbon nanotubes
von: V. V. Trachevskyi, et al.
Veröffentlicht: (2022) -
Influence of noncovalent modification of carbon nanotubes by polyethylene glycol on their distribution in the polymer matrix
von: E. Lysenkov, et al.
Veröffentlicht: (2022) -
Microwave Properties and Conductivity Anisotropy of Oriented Multiwalled Carbon Nanotube/Epoxy Composites
von: Vovchenko, L.L., et al.
Veröffentlicht: (2016) -
Thermal destruction of epoxy polymers and epoxy-silica composites cured with anhydride in the presence of metal acetylacetonates
von: A. A. Lugovaja, et al.
Veröffentlicht: (2013) -
Viscoelastic and thermal properties of epoxy polymers and epoxy-silica composites cured with anhydride in the presence of metal acetylacetonates
von: A. A. Lugovaja, et al.
Veröffentlicht: (2012)