Peculiarities of fracture of hydrogenated high- nitrogen manganese steels under rolling friction
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | O. I. Balytskyi, V. O. Kolesnikov, Ya. Eliash, M. R. Havryliuk |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2014
|
| Назва видання: | Materials Science (Physicochemical mechanics of materials) |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000662792 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Investigation of wear-resistance of high-nitrogen steels under dry sliding friction conditions
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2012)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2012)
Kinetics of wear of steels with diffusion coatings under rolling friction
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
Fracture resistanceof steels under biaxial loading in hydrogen
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2012)
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2012)
Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
за авторством: V. Kirots, та інші
Опубліковано: (2012)
за авторством: V. Kirots, та інші
Опубліковано: (2012)
High-temperature hydrogen resistance of stainless steels
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2010)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2010)
Peculiarities of deformation and fracture of low-alloyed steels in hydrogen-containing environments: influence of hydrogen concentration in metal
за авторством: I. M. Dmytrakh, та інші
Опубліковано: (2018)
за авторством: I. M. Dmytrakh, та інші
Опубліковано: (2018)
Tre coefficients of friction in rolling
за авторством: A. K. Radchenko, та інші
Опубліковано: (2012)
за авторством: A. K. Radchenko, та інші
Опубліковано: (2012)
About the parents of brittle fracture in high-carbon rolled wire
за авторством: A. I. Trotsan, та інші
Опубліковано: (2013)
за авторством: A. I. Trotsan, та інші
Опубліковано: (2013)
Wear resistance of surfaced metal of type of carbon and chromium-manganese steels under conditions of dry friction of sliding of metal against metal
за авторством: V. D. Kuznetsov, та інші
Опубліковано: (2013)
за авторством: V. D. Kuznetsov, та інші
Опубліковано: (2013)
Estimation of hydrogen effect on delayed fracture of welded joints of high-strength low-alloy steels
за авторством: N. N. Kharbin, та інші
Опубліковано: (2012)
за авторством: N. N. Kharbin, та інші
Опубліковано: (2012)
Peculiarities of the analysis of the initial stage of corrosion-erosion fracture of high-strength steel
за авторством: V. A. Voloshyn, та інші
Опубліковано: (2013)
за авторством: V. A. Voloshyn, та інші
Опубліковано: (2013)
Effect of diffusive hydrogen on resistance against delayed fracture of high-carbon steel welded joints
за авторством: A. A. Gajvoronskij
Опубліковано: (2013)
за авторством: A. A. Gajvoronskij
Опубліковано: (2013)
Peculiarities of fracture of high-chromium cast irons under abrasive wear
за авторством: V. V. Netrebko, та інші
Опубліковано: (2021)
за авторством: V. V. Netrebko, та інші
Опубліковано: (2021)
The method of fatigue fracture kinetic curves plotting of steels under transversal shear taking into account the crack edges friction
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2013)
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2013)
The influence of modification of 38KhN3MFA steel on structural and phase state and cutting products under the change of technological conditions
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2019)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2019)
Boundary friction on molecular lubricants: rolling mode?
за авторством: Loktev, V.M., та інші
Опубліковано: (2004)
за авторством: Loktev, V.M., та інші
Опубліковано: (2004)
The influence of hydrogenation on fracture of nitinol alloy under tension
за авторством: V. P. Yasnii, та інші
Опубліковано: (2019)
за авторством: V. P. Yasnii, та інші
Опубліковано: (2019)
Hydrogen influence on fracture resistance of sheet steel 65H
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2011)
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2011)
Resistance against cavitation-erosion and fatigue fracture of sheet ship building steels
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2014)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2014)
The influence of manganese on the wear resistance of cast steel fe-cr-c under conditions of high sliding velocity
за авторством: V. G. Novitskij, та інші
Опубліковано: (2015)
за авторством: V. G. Novitskij, та інші
Опубліковано: (2015)
The influence of texture and hydrogenation on mechanical properties and fracture behaviour of pipe steel
за авторством: P. O. Marushchak, та інші
Опубліковано: (2019)
за авторством: P. O. Marushchak, та інші
Опубліковано: (2019)
Peculiarities of mathematical modelling for steel ingots heating before rolling
за авторством: E. N. Shebanits, та інші
Опубліковано: (2012)
за авторством: E. N. Shebanits, та інші
Опубліковано: (2012)
Rheological properties of steel at roll casting-rolling
за авторством: O. V. Nohovitsyn, та інші
Опубліковано: (2014)
за авторством: O. V. Nohovitsyn, та інші
Опубліковано: (2014)
Minimization of fracture parameters for friction pair hub
за авторством: Мирсалимов, В. М., та інші
Опубліковано: (2015)
за авторством: Мирсалимов, В. М., та інші
Опубліковано: (2015)
Minimization of fracture parameters for friction pair hub
за авторством: Мирсалимов, В. М., та інші
Опубліковано: (2015)
за авторством: Мирсалимов, В. М., та інші
Опубліковано: (2015)
Minimization of fracture parameters for friction pair hub
за авторством: V. M. Mirsalimov, та інші
Опубліковано: (2015)
за авторством: V. M. Mirsalimov, та інші
Опубліковано: (2015)
The influence of thermal resistance of lubricating-cooling liquids on 12Kh18AH18Sh steel machining
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2016)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2016)
Mechanical properties and fracture behavior of high-strength steels
за авторством: Musalek, R., та інші
Опубліковано: (2008)
за авторством: Musalek, R., та інші
Опубліковано: (2008)
The influence of preliminary plastic deformation of 12Kh18N12T steel on its mechanical characteristics
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2011)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2011)
The influence of lubricating liquid on formation of cutting products of 38KhN3MFA steel
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2018)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2018)
Hot-cracking of high-alloyed steels evaluated by wedge rolling test
за авторством: Schindler, I., та інші
Опубліковано: (2008)
за авторством: Schindler, I., та інші
Опубліковано: (2008)
Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
за авторством: Guan, B., та інші
Опубліковано: (2018)
за авторством: Guan, B., та інші
Опубліковано: (2018)
Finite element simulation of hydrogen influence on the accumulation of damages in the steels under high-temperature creep
за авторством: Jiang Qiongqin, та інші
Опубліковано: (2019)
за авторством: Jiang Qiongqin, та інші
Опубліковано: (2019)
Physical-metallurgy aspects in processes of fracture of metal materials at friction
за авторством: S. A. Bespalov
Опубліковано: (2009)
за авторством: S. A. Bespalov
Опубліковано: (2009)
Structure and properties of sintered manganese steels with different carbon contents
за авторством: H. A. Bahliuk, та інші
Опубліковано: (2010)
за авторством: H. A. Bahliuk, та інші
Опубліковано: (2010)
The influence of hydrogen on friction and wear of metals (Review)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
Causes of crack formation in heat-affected zone of cast high-manganese steel in flash-butt welding
за авторством: S. I. Kuchuk-Jatsenko, та інші
Опубліковано: (2010)
за авторством: S. I. Kuchuk-Jatsenko, та інші
Опубліковано: (2010)
Deformation and fracture of high-temperature steels at different temperatures and loading rates
за авторством: Kondryakov, E.A., та інші
Опубліковано: (2009)
за авторством: Kondryakov, E.A., та інші
Опубліковано: (2009)
Methods for assessing fracture and strength of pipeline steels and structures under effect of operating environments. P. II. The influence of hydrogen-containing environments
за авторством: A. M. Syrotiuk, та інші
Опубліковано: (2014)
за авторством: A. M. Syrotiuk, та інші
Опубліковано: (2014)
Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
за авторством: S. E. Kondratiuk, та інші
Опубліковано: (2016)
за авторством: S. E. Kondratiuk, та інші
Опубліковано: (2016)
Схожі ресурси
-
Investigation of wear-resistance of high-nitrogen steels under dry sliding friction conditions
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2012) -
Kinetics of wear of steels with diffusion coatings under rolling friction
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020) -
Fracture resistanceof steels under biaxial loading in hydrogen
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2012) -
Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
за авторством: V. Kirots, та інші
Опубліковано: (2012) -
High-temperature hydrogen resistance of stainless steels
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2010)