Buchumschlag

Improving efficiency of finishing natural stone using diamond–polymer fiber tools

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	V. D. Kurilovych, Yu. D. Filatov, V. A. Kovalov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000695680
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

A mechanism of diamond-abrasive finishing of monocrystalline silicon carbide
von: Ju. D. Filatov, et al.
Veröffentlicht: (2013)

Finishing spur gears worm diamond elasticity hons
von: A. V. Krivosheja, et al.
Veröffentlicht: (2016)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Resource-saving issues when recovering diamond particles from rock sludge, which was formed during the operation of the diamond drilling and stone-working tool
von: N. A. Olejnik, et al.
Veröffentlicht: (2019)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
von: T. O. Prikhna, et al.
Veröffentlicht: (2022)

Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)

On the structure formation of diamond-containing composites used in drilling and stone-working rools (A review)
von: V. N. Kolodnitskij, et al.
Veröffentlicht: (2017)

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

The two-component model of the structure and elastic deformation of polymer fibers
von: L. A. Bulavin, et al.
Veröffentlicht: (2012)

Global precious stones market and modern tendencies of diamonds market development
von: O. Ksenzhuk
Veröffentlicht: (2017)

Material removal rate in polishing of polymer optical materials
von: Yu. D. Filatov, et al.
Veröffentlicht: (2022)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

CVD diamonds in diamond tools: features and properties, features of processing and application in modern diamond tools (Review)
von: V. I. Lavrinenko
Veröffentlicht: (2022)

Analysis of MicroResidues on Stone Tools From Zaskelna IX, Crimea: First Results
von: Ryzhov S., et al.
Veröffentlicht: (2022)

Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
von: K. S. Barandych, et al.
Veröffentlicht: (2018)

Influence of porosity of tool composite on efficiency of profile diamond grinding of sapphire and zirconium dioxide
von: Ye. O. Pashchenko, et al.
Veröffentlicht: (2020)

Improvement of electric and technological modes of metal finishing in a ladle furnace
von: N. M. Perevorochaev, et al.
Veröffentlicht: (2011)

Investigation of planar quantum functional polymer nanolayers structures on rolybenzimidazole fiber nanosheets
von: O. V. Balaban, et al.
Veröffentlicht: (2017)

Formation of diamond-carbide granules to be used in rock destruction tools
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)

Diamond polishing of crystalline materials for optoelectronics
von: Ju. D. Filatov
Veröffentlicht: (2017)

Chalanges of ureteral stones treatment using intracorporeal lithotripsy
von: I. M. Antonjan, et al.
Veröffentlicht: (2017)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2016)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: D. Xie, et al.
Veröffentlicht: (2018)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Electrodeposited diamond coating with protection by diamond micron powder in a dressing tool. Part 2. Tool performance
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

Contract - a tool for improving management of the natural reserve fund
von: T. O. Nikolaichuk, et al.
Veröffentlicht: (2018)

Consumer Analysis as a Tool to Improve the Efficiency of Functioning of Consumer Market
von: O. V. Shymko
Veröffentlicht: (2016)

The stone tools of the Upper Palaeolithic site Radomishl&#039; I: specificity and interpretation of the typology
von: O. M. Kononenko
Veröffentlicht: (2015)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

Ways and Tools to Improve the Efficiency of Natural Resources in Ukraine. (Management Mechanisms and Means of Hydrogen Sulfide Mixture Processing into the Black Sea)
von: B. M. Andrushkiv, et al.
Veröffentlicht: (2021)

The Barrow with the Stone Bank on the West Podillya
von: O. D. Mohylov, et al.
Veröffentlicht: (2016)

Improvement of Methods of Assessment of Efficiency of Use of Agricultural Lands
von: E. D. Abduraimova
Veröffentlicht: (2013)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Engineering of polymers with a free volume in abrasive tool composites
von: D. A. Savchenko, et al.
Veröffentlicht: (2014)

Energy efficient of the production of the heat insulation based on the basalt super thin fibers
von: V. O. Kremnov, et al.
Veröffentlicht: (2018)

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)