Buchumschlag

Tribology of cutting by tools equipped with cBN_based PSHM

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	A. S. Manokhin, S. A. Klimenko, Ju. Kopejkina, V. V. Roshchupkin, M. M. Ljakhovitskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000695692
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
von: S. A. Klimenko, et al.
Veröffentlicht: (2015)

AlN–(TiCr)B2 ion–plasma coating for cutting tools of cBN_based polycrystalline superhard material
von: S. A. Klimenko, et al.
Veröffentlicht: (2014)

Methods of cutting for workpieces of hardmetal and cBN_based polycrystalline superhard material
von: A. F. Salenko, et al.
Veröffentlicht: (2015)

Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings
von: S. A. Klimenko, et al.
Veröffentlicht: (2017)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
von: K. O. Diadiura, et al.
Veröffentlicht: (2015)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

A stressed state in the cutting zone of the PcBN tool with coating based on TiAlSiYN system
von: A. S. Manokhin, et al.
Veröffentlicht: (2022)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

Experimental investigation and finite modeling of the process of intermittent cutting of AISI 52100 steel with PcBN tool
von: Li Xin, et al.
Veröffentlicht: (2023)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Promising types of coatings for PCBN tools
von: A. S. Manokhin, et al.
Veröffentlicht: (2018)

Microstructure and mechanical properties of c-BN reinforced (Ti,W)C-based cermet tool materials
von: B. Fang, et al.
Veröffentlicht: (2021)

Wear intensity of the PcBN tools with nanolayered protective coating
von: A. S. Manokhin, et al.
Veröffentlicht: (2020)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

HP-HT sintering of cBN based materials with ZrC and Al
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

Materials and equipment for surfacing of metal hot cutting knives
von: A. P. Zhudra, et al.
Veröffentlicht: (2015)

Intellectual System of Refusals Diagnosing and Cutting Part of Cutting Tools Renewal
von: A. G. Derevjanchenko
Veröffentlicht: (2013)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
von: A. S. Osipov, et al.
Veröffentlicht: (2016)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Sintering of superhard cBN-based materials with Ti4WC5
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)

The influence of VC–Al additive on wear resistance of cBN-based composites
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

On calculation of cutting forces and characteristics of the contact interaction of a chip with the tool in cutting plastic metals
von: A. A. Vinogradov
Veröffentlicht: (2013)

Determination of tribological properties of multilayer coatings based on nitrides
von: J. Brezinová, et al.
Veröffentlicht: (2022)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: Chen, L., et al.
Veröffentlicht: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: L. Chen, et al.
Veröffentlicht: (2017)

Magnetic-resonance and tribological properties of organoplastics based on copolymer BSP-7
von: M. O. Graschenkova, et al.
Veröffentlicht: (2023)

Equipment on base of lathe tools for mill roll hard-facing
von: V. I. Titarenko, et al.
Veröffentlicht: (2013)

Thermobaric sintering of cBN-Cr3C2 composite
von: K. V. Slipchenko, et al.
Veröffentlicht: (2017)

Plasma hardening of cutting edges of soil-cultivating tool
von: S. S. Samotugin, et al.
Veröffentlicht: (2009)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)

Reinforcement of rock cutting tool by large synthetic monocrystal
von: M. S. Popova
Veröffentlicht: (2019)

The peculiarities of the tool steel corrosion in cutting zone
von: N. V. Kret, et al.
Veröffentlicht: (2014)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: P. Han, et al.
Veröffentlicht: (2018)

Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder: structure, properties, application
von: Kolabylina, T., et al.
Veröffentlicht: (2017)