Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
Збережено в:
| Дата: | 2021 |
|---|---|
| Автори: | Ya. Z. Aygьzer, R. A. Haber |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2021
|
| Назва видання: | Superhard Materials |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001295479 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2021)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2021)
Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2018)
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2018)
Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2016)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2016)
Influence of boron doping on the photosensitivity of cubic silicon carbide
за авторством: V. N. Rodionov, та інші
Опубліковано: (2019)
за авторством: V. N. Rodionov, та інші
Опубліковано: (2019)
Modeling of the temperature field in a high-pressure apparatus during sintering of large-sized products based on boron carbide
за авторством: V. A. Dutka, та інші
Опубліковано: (2020)
за авторством: V. A. Dutka, та інші
Опубліковано: (2020)
Boron, aluminum, nitrogen, oxygen impurities in silicon carbide
за авторством: Vlaskina, S.I., та інші
Опубліковано: (2007)
за авторством: Vlaskina, S.I., та інші
Опубліковано: (2007)
On melting of silicon carbide under pressure
за авторством: P. S. Sokolov, та інші
Опубліковано: (2012)
за авторством: P. S. Sokolov, та інші
Опубліковано: (2012)
Low-temperature synthesis of boron carbide ceramics
за авторством: Ye. V. Solodkyi, та інші
Опубліковано: (2018)
за авторством: Ye. V. Solodkyi, та інші
Опубліковано: (2018)
On melting of B4C boron carbide under pressure
за авторством: V. A. Mukhanov, та інші
Опубліковано: (2012)
за авторством: V. A. Mukhanov, та інші
Опубліковано: (2012)
Modeling of the thermal state of a high pressure apparatus cell during the sintering of large-sized carbide boron products
за авторством: V. A. Dutka, та інші
Опубліковано: (2019)
за авторством: V. A. Dutka, та інші
Опубліковано: (2019)
Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
за авторством: Yu. Yu. Rumiantseva, та інші
Опубліковано: (2018)
за авторством: Yu. Yu. Rumiantseva, та інші
Опубліковано: (2018)
Electrical resistivity of pressureless sintered aluminum nitride based composite with addition of nanosized silicon carbide
за авторством: I. P. Fesenko, та інші
Опубліковано: (2017)
за авторством: I. P. Fesenko, та інші
Опубліковано: (2017)
Structure and electrophysical properties of the diamond–graphen–silicon carbide composite
за авторством: A. A. Shulzhenko, та інші
Опубліковано: (2018)
за авторством: A. A. Shulzhenko, та інші
Опубліковано: (2018)
Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
за авторством: S. V. Sokhan, та інші
Опубліковано: (2021)
за авторством: S. V. Sokhan, та інші
Опубліковано: (2021)
Silicon carbide LED
за авторством: Vlaskina, S.I.
Опубліковано: (2002)
за авторством: Vlaskina, S.I.
Опубліковано: (2002)
Influence of phase composition on physico-mechanical properties of composites based on silicon, boron and titanium nitrides, sintered under high pressure
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2017)
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2017)
A silicon carbide thermistor
за авторством: Boltovets, N.S., та інші
Опубліковано: (2006)
за авторством: Boltovets, N.S., та інші
Опубліковано: (2006)
Computer simulation of the temperature field in sintering carbide composites when induction and beam heatings are used
за авторством: V. A. Dutka
Опубліковано: (2013)
за авторством: V. A. Dutka
Опубліковано: (2013)
Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
за авторством: I. V. Plyushchay, та інші
Опубліковано: (2020)
за авторством: I. V. Plyushchay, та інші
Опубліковано: (2020)
Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
за авторством: I. V. Pliushchai, та інші
Опубліковано: (2020)
за авторством: I. V. Pliushchai, та інші
Опубліковано: (2020)
Structure formation in silicon carbide–alumina composites during electroconsolidation
за авторством: E. S. Hevorkian, та інші
Опубліковано: (2022)
за авторством: E. S. Hevorkian, та інші
Опубліковано: (2022)
Research of the influence of siliconizing on the structure and properties of hot-pressed polycrystalline silicon carbide
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2018)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2018)
Deposition of boron carbide coatings by gas-phase method
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2019)
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2019)
Initiation of a plastic flow in boron carbide at nanoindentation
за авторством: S. N. Dub, та інші
Опубліковано: (2015)
за авторством: S. N. Dub, та інші
Опубліковано: (2015)
Location of Al and Si atoms in substituted boron carbide
за авторством: V. V. Garbuz, та інші
Опубліковано: (2023)
за авторством: V. V. Garbuz, та інші
Опубліковано: (2023)
Manufacturing technology for contacts to silicon carbide
за авторством: Ja. Ja. Kudrik, та інші
Опубліковано: (2013)
за авторством: Ja. Ja. Kudrik, та інші
Опубліковано: (2013)
Nanograin boundaries and silicon carbide photoluminescence
за авторством: S. I. Vlaskina, та інші
Опубліковано: (2017)
за авторством: S. I. Vlaskina, та інші
Опубліковано: (2017)
Preparation and characterization of diamond–silicon carbide–silicon composites gaseous silicon vacuum infiltration process
за авторством: R. J. Liu, та інші
Опубліковано: (2014)
за авторством: R. J. Liu, та інші
Опубліковано: (2014)
Preparation and characterization of diamond–silicon carbide–silicon composites gaseous silicon vacuum infiltration process
за авторством: R. J. Liu, та інші
Опубліковано: (2014)
за авторством: R. J. Liu, та інші
Опубліковано: (2014)
Research of the influence of silicon impregnation on the structure and properties of hot-pressed silicon carbide
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2017)
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2017)
A study of the influence of the plasticizers on the process of formation of boron carbide
за авторством: V. S. Panov, та інші
Опубліковано: (2016)
за авторством: V. S. Panov, та інші
Опубліковано: (2016)
Saturation of capillary pores in silicon carbide briqettes with liquid-phase carbon-containing solutions before the reaction-sintering
за авторством: V. G. Kulich, та інші
Опубліковано: (2016)
за авторством: V. G. Kulich, та інші
Опубліковано: (2016)
Nanocrystalline silicon carbide films for solar cells
за авторством: S. I. Vlaskina, та інші
Опубліковано: (2016)
за авторством: S. I. Vlaskina, та інші
Опубліковано: (2016)
Features of the structure and properties of metal layers deposited with pre-application of titanium and boron carbides
за авторством: V. V. Peremitko, та інші
Опубліковано: (2022)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2022)
Features of the structure formation of secondary silicon carbide synthesized under conditions of the interaction of nano-sized nonstoichiometric silicon carbide with iron oxide
за авторством: Ya. H. Tymoshenko, та інші
Опубліковано: (2017)
за авторством: Ya. H. Tymoshenko, та інші
Опубліковано: (2017)
Investigation of the formation during sintering diamond-carbide plates with activation additions
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2017)
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2017)
Estimation of field-emission properties of nanostructures based on silicon carbide and graphene
за авторством: O. B. Okhrimenko, та інші
Опубліковано: (2012)
за авторством: O. B. Okhrimenko, та інші
Опубліковано: (2012)
Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
за авторством: Yu. O. Shyshkina, та інші
Опубліковано: (2018)
за авторством: Yu. O. Shyshkina, та інші
Опубліковано: (2018)
Investigation of the influence of high-speed sintering modes on the structure and properties of WC-based carbide composite with high entropy bonding
за авторством: O. A. Yurkova, та інші
Опубліковано: (2024)
за авторством: O. A. Yurkova, та інші
Опубліковано: (2024)
Gas-phase deposition of cavitation-resistant coatings based on boron carbide
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2018)
за авторством: Yu. Zhuravlov, та інші
Опубліковано: (2018)
Схожі ресурси
-
Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2021) -
Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
за авторством: V. S. Urbanovich, та інші
Опубліковано: (2018) -
Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
за авторством: V. V. Ivzhenko, та інші
Опубліковано: (2016) -
Influence of boron doping on the photosensitivity of cubic silicon carbide
за авторством: V. N. Rodionov, та інші
Опубліковано: (2019) -
Modeling of the temperature field in a high-pressure apparatus during sintering of large-sized products based on boron carbide
за авторством: V. A. Dutka, та інші
Опубліковано: (2020)