Buchumschlag

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	V. I. Lavrinenko, O. O. Pasichnyi, V. H. Poltoratskyi, Yu. Solod, V. L. Dobroskok, Ye. V. Ostroverkh
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2021
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001295484
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2022)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness
von: O. O. Pasichnyi, et al.
Veröffentlicht: (2019)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
von: T. P.G. Nguen
Veröffentlicht: (2016)

Grinding of gear wheels by diamond-abrasive wheels
von: S. V. Rjabchenko
Veröffentlicht: (2017)

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Gear grinding with superabrasive dish wheels
von: S. V. Rjabchenko
Veröffentlicht: (2014)

Gear grinding with superabrasive dish wheels
von: S. V. Rjabchenko
Veröffentlicht: (2014)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Specifying the process parameters for diamond dressing of grinding wheels
von: Ya. O. Shakhbazov, et al.
Veröffentlicht: (2019)

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
von: H. A. Petasiuk, et al.
Veröffentlicht: (2019)

Picnometric-additive method for determining the degree of coating of grinding powders superhard matirials with the use of an extrapolation-affine 3D grain model
von: H. A. Petasiuk, et al.
Veröffentlicht: (2020)

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition)
von: V. I. Lavrinenko
Veröffentlicht: (2013)

Highly porous cubic boron nitride wheels for dry grinding
von: V. K. Starkov
Veröffentlicht: (2013)

Determining cutting force components in deep grinding of revolution surfaces by oriented el&#039;bor wheel
von: V. I. Kalchenko, et al.
Veröffentlicht: (2012)

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component)
von: V. I. Lavrinenko
Veröffentlicht: (2012)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic
von: H. A. Petasiuk, et al.
Veröffentlicht: (2022)

The effect of the velocity of rotation in the vibro-grinding process on the surface state
von: K. Hamouda, et al.
Veröffentlicht: (2016)

Determination of oxides intended for surface modification of diamond grains by their functional characteristics
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2020)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
von: V. P. Afanasev, et al.
Veröffentlicht: (2016)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2018)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Cast grinding bodies
von: Ju. V. Moiseev, et al.
Veröffentlicht: (2017)

The influence of debris solids on the ground surface roughness and the assessment of the surface scratching probability
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2019)

Statistical analysis of compression strength of single grains of SHM powders and improvement of the strength assessment procedure
von: Ju. V. Sirota, et al.
Veröffentlicht: (2013)

The elemental composition of growth synthesis systems influence on technological properties, morphometric characteristics, the shape of the projection of grains and the uniformity of grinding powders of synthetic diamond was studied
von: H. A. Petasiuk, et al.
Veröffentlicht: (2017)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Rotational scheme of a high-efficient dressing of grinding wheels from cubic boron nitride
von: D. Hessel, et al.
Veröffentlicht: (2015)

Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
von: V. K. Starkov, et al.
Veröffentlicht: (2015)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of superabrasive composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
von: V. I. Lavrinenko
Veröffentlicht: (2016)

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
von: P. G. Matjukha, et al.
Veröffentlicht: (2017)

Abrasive ability of staurolite mineral concentrate*. use of stavrolit in abrasive pastes and in grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

Diamond grinding of the WC–8Co–steel 45 composition using the control of the wheel cutting ability by an electroerosion method
von: A. V. Burdin, et al.
Veröffentlicht: (2013)

Study of the Process of Gas Emission from Ni Nanocrystalline Powders Fabricated by Ball Grinding in Ultrasonic Mill
von: A. E. Perekos, et al.
Veröffentlicht: (2011)

Evolution of protective linings for the ore-grinding mills
von: V. I. Dyrda, et al.
Veröffentlicht: (2014)