Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains

Збережено в:

Бібліографічні деталі
Дата:	2021
Автори:	V. I. Lavrinenko, O. O. Pasichnyi, V. H. Poltoratskyi, Yu. Solod, V. L. Dobroskok, Ye. V. Ostroverkh
Формат:	Стаття
Мова:	English
Опубліковано:	2021
Назва видання:	Superhard Materials
Онлайн доступ:	http://jnas.nbuv.gov.ua/article/UJRN-0001295484
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Репозитарії

Library portal of National Academy of Sciences of Ukraine | LibNAS

Схожі ресурси

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2022)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2024)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
за авторством: S. V. Rjabchenko, та інші
Опубліковано: (2018)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2024)

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness
за авторством: O. O. Pasichnyi, та інші
Опубліковано: (2019)

Grinding of gear wheels by diamond-abrasive wheels
за авторством: S. V. Rjabchenko
Опубліковано: (2017)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
за авторством: T. P.G. Nguen
Опубліковано: (2016)

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2016)

Gear grinding with superabrasive dish wheels
за авторством: S. V. Rjabchenko
Опубліковано: (2014)

Gear grinding with superabrasive dish wheels
за авторством: S. V. Rjabchenko
Опубліковано: (2014)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2016)

Specifying the process parameters for diamond dressing of grinding wheels
за авторством: Ya. O. Shakhbazov, та інші
Опубліковано: (2019)

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2019)

Picnometric-additive method for determining the degree of coating of grinding powders superhard matirials with the use of an extrapolation-affine 3D grain model
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2020)

Determining cutting force components in deep grinding of revolution surfaces by oriented el'bor wheel
за авторством: V. I. Kalchenko, та інші
Опубліковано: (2012)

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition)
за авторством: V. I. Lavrinenko
Опубліковано: (2013)

Highly porous cubic boron nitride wheels for dry grinding
за авторством: V. K. Starkov
Опубліковано: (2013)

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component)
за авторством: V. I. Lavrinenko
Опубліковано: (2012)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
за авторством: A. A. Adamovskij, та інші
Опубліковано: (2015)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
за авторством: V. I. Lavrinenko
Опубліковано: (2024)

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2022)

The effect of the velocity of rotation in the vibro-grinding process on the surface state
за авторством: K. Hamouda, та інші
Опубліковано: (2016)

Determination of oxides intended for surface modification of diamond grains by their functional characteristics
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2020)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
за авторством: S. V. Sokhan, та інші
Опубліковано: (2020)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
за авторством: V. P. Afanasev, та інші
Опубліковано: (2016)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Cast grinding bodies
за авторством: Ju. V. Moiseev, та інші
Опубліковано: (2017)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
за авторством: G. A. Petasjuk, та інші
Опубліковано: (2018)

The influence of debris solids on the ground surface roughness and the assessment of the surface scratching probability
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2019)

Statistical analysis of compression strength of single grains of SHM powders and improvement of the strength assessment procedure
за авторством: Ju. V. Sirota, та інші
Опубліковано: (2013)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2013)

The elemental composition of growth synthesis systems influence on technological properties, morphometric characteristics, the shape of the projection of grains and the uniformity of grinding powders of synthetic diamond was studied
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2017)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
за авторством: V. G. Poltoratskij, та інші
Опубліковано: (2016)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Rotational scheme of a high-efficient dressing of grinding wheels from cubic boron nitride
за авторством: D. Hessel, та інші
Опубліковано: (2015)

Determining the conditions for achieving the plastic mode of diamond grinding of ceramic materials from the standpoint of estimating energy costs during processing
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2023)

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool
за авторством: V. V. Smokvyna, та інші
Опубліковано: (2023)

Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
за авторством: V. K. Starkov, та інші
Опубліковано: (2015)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of superabrasive composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
за авторством: V. I. Lavrinenko
Опубліковано: (2016)