Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | V. A. Dekret, V. M. Bystrov, V. S. Zelenskyi |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2021
|
| Schriftenreihe: | International Applied Mechanics |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0001296259 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Stability Loss of Layered Composite under Compression of Reinforcing Layers by Surface Load
von: V. M. Bystrov, et al.
Veröffentlicht: (2017)
von: V. M. Bystrov, et al.
Veröffentlicht: (2017)
Edge Effect and Near-the-Surface Buckling in Layerd Composite Material under Imperfect Contact between Layers
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
Numerical Study of Stability of Layered Composite under Uni-Axial Compression of Filler Layers
von: V. A. Dekret, et al.
Veröffentlicht: (2014)
von: V. A. Dekret, et al.
Veröffentlicht: (2014)
Model of Finite Size Fibers in the Three-Dimensional Theory of Stability of Composite Materials (Review)
von: A. N. Guz, et al.
Veröffentlicht: (2016)
von: A. N. Guz, et al.
Veröffentlicht: (2016)
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)
von: A. I. Burja, et al.
Veröffentlicht: (2015)
Nearsurface buckling in laminate composite material with imperfect interlayer contact
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
Numerical Study of Edge Effect in Layered Composite Material under Compression of Filler Layers
von: V. M. Bystrov, et al.
Veröffentlicht: (2015)
von: V. M. Bystrov, et al.
Veröffentlicht: (2015)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)
von: Huang, T., et al.
Veröffentlicht: (2016)
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
von: A. I. Burja, et al.
Veröffentlicht: (2017)
von: A. I. Burja, et al.
Veröffentlicht: (2017)
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
Numerical study of the stability of composite materials on computers of hybrid architecture
von: A. N. Khimich, et al.
Veröffentlicht: (2018)
von: A. N. Khimich, et al.
Veröffentlicht: (2018)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
von: Verma, S., et al.
Veröffentlicht: (2017)
von: Verma, S., et al.
Veröffentlicht: (2017)
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Calculation of the characte¬ristics of the multichannel queueing system with pure losses and feedback
von: A. Z. Melikov, et al.
Veröffentlicht: (2015)
von: A. Z. Melikov, et al.
Veröffentlicht: (2015)
Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
von: Felinskyi, G.S., et al.
Veröffentlicht: (2013)
von: Felinskyi, G.S., et al.
Veröffentlicht: (2013)
Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
von: G. S. Felinskyi, et al.
Veröffentlicht: (2013)
von: G. S. Felinskyi, et al.
Veröffentlicht: (2013)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)
von: Kim, J.W.
Veröffentlicht: (2016)
Numerical prediction of effectiveness of reinforcement of defective pipelines by composite material bands
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2016)
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2016)
Conditions for the stability of an impulsive linear equation with pure delay
von: Ivanov, I. L., et al.
Veröffentlicht: (2009)
von: Ivanov, I. L., et al.
Veröffentlicht: (2009)
Cellulose Obtaining from Short Flax Fiber by Oxidative and Organic Solvent Delignification
von: I. M. Dejkun, et al.
Veröffentlicht: (2011)
von: I. M. Dejkun, et al.
Veröffentlicht: (2011)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
Spectrum and frequency of numerical chromosomal abnormalities in material of early reproductive loss
von: I. R. Tkach, et al.
Veröffentlicht: (2015)
von: I. R. Tkach, et al.
Veröffentlicht: (2015)
End effect and near-surface buckling in a laminate composite material compres sed by a surface load
von: V. M. Bystrov
Veröffentlicht: (2019)
von: V. M. Bystrov
Veröffentlicht: (2019)
On the issue of determining critical levels for the stability losses in composite materials
von: S. I. Skipochka, et al.
Veröffentlicht: (2013)
von: S. I. Skipochka, et al.
Veröffentlicht: (2013)
Elastic State of Inclusion in the Form of Short Fiber under Sliding Contact with Three-Dimensional Matrix
von: V. V. Mikhaskiv, et al.
Veröffentlicht: (2015)
von: V. V. Mikhaskiv, et al.
Veröffentlicht: (2015)
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
Loss of cohesion between concrete and steel reinforcement under the influence of corrosion-hydrogenated environment
von: M. I. Hredil
Veröffentlicht: (2021)
von: M. I. Hredil
Veröffentlicht: (2021)
Stability of a discretely reinforced plate in gas flow
von: B. A. Antufev
Veröffentlicht: (2013)
von: B. A. Antufev
Veröffentlicht: (2013)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Numerical simulations of short-timescale geomagnetic field variations
von: Sakuraba, A.
Veröffentlicht: (2010)
von: Sakuraba, A.
Veröffentlicht: (2010)
Numerical simulations of short-timescale geomagnetic field variations
von: A. Sakuraba
Veröffentlicht: (2010)
von: A. Sakuraba
Veröffentlicht: (2010)
Numerical simulation of losses and heating in the constructional elements of transformers of ferromagnetic steel
von: Ivankov, V.F., et al.
Veröffentlicht: (2014)
von: Ivankov, V.F., et al.
Veröffentlicht: (2014)
Numerical simulation of losses and heating in the constructional elements of transformers of ferromagnetic steel
von: V. F. Ivankov, et al.
Veröffentlicht: (2014)
von: V. F. Ivankov, et al.
Veröffentlicht: (2014)
Ähnliche Einträge
-
Stability Loss of Layered Composite under Compression of Reinforcing Layers by Surface Load
von: V. M. Bystrov, et al.
Veröffentlicht: (2017) -
Edge Effect and Near-the-Surface Buckling in Layerd Composite Material under Imperfect Contact between Layers
von: V. M. Bystrov, et al.
Veröffentlicht: (2022) -
Numerical Study of Stability of Layered Composite under Uni-Axial Compression of Filler Layers
von: V. A. Dekret, et al.
Veröffentlicht: (2014) -
Model of Finite Size Fibers in the Three-Dimensional Theory of Stability of Composite Materials (Review)
von: A. N. Guz, et al.
Veröffentlicht: (2016) -
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)