Buchumschlag

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	A. G. Chernjatevich
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839694
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2018)

Converter bath mixing peculiarities during upper and combined blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Improving the efficiency of converter bath top-blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Blowing steel of inert gas in six-strand tundish
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2019)

Formation of metal drops in slag phase at steel blowing inert gas in the tundish
von: V. G. Efimova
Veröffentlicht: (2014)

Influense of blowing of Inert gas purge in the tundish on the distribution of non-metallic Inclusions
von: V. G. Efimova, et al.
Veröffentlicht: (2014)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2019)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)

Behavior pattern of temperature condition of converter bath
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2011)

Analysis of information on decarburization process bath converter
von: K. V. Egorov, et al.
Veröffentlicht: (2014)

The Researh of efficacy Removing non-metallies inclusions white inert gas is blowing on Metal in the industrial ladle with argon bubbles by Different Diameters
von: V. G. Efimova
Veröffentlicht: (2014)

Splashes of liquid phases at the top of the oxygen blowing
von: V. B. Okhotskij
Veröffentlicht: (2013)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

Effect of low-energy inert-gas ion bombardment of the metal surface on the oxygen adsorption and oxidation
von: M. O. Vasylyev, et al.
Veröffentlicht: (2016)

Effect of Low-Energy Inert-Gas Ion Bombardment of the Metal Surface on the Oxygen Adsorption and Oxidation
von: Vasylyev, M.O., et al.
Veröffentlicht: (2016)

Investigation of the effect of slag on mixing of a bucket bath at bottom blowing by a method of physical modeling
von: V. P. Piptiuk, et al.
Veröffentlicht: (2018)

Analysis of the electrical characteristics of the converter when melting steel bath
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Influence of the application of pulverized coal and natural gas in blast furnace on exergy indicators of technological system &quot;blast furnace-oxygen converter&quot;
von: A. L. Chajka, et al.
Veröffentlicht: (2018)

Progress of inert-gas welding (Review)
von: A. P. Litvinov
Veröffentlicht: (2009)

The new technologies and lance improvement for the converter slag scull coating
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Conduct and research of the process of joint treatment of steel with inert gas and chemically active elements using new blowing devices and pinch rolls. Message II
von: P. A. Plokhikh, et al.
Veröffentlicht: (2017)

Experience in developing the oxygen lance with tip central cooling
von: A. G. Chernjatevich
Veröffentlicht: (2017)

Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Kinetics of inert gas and methane penetration into coal structure
von: V. A. Vasilkovskij
Veröffentlicht: (2011)

Trends in development of combined and hybrid technologies of welding and surfacing
von: A. P. Litvinov
Veröffentlicht: (2009)

Rational technology of preparation of iron for smelting of low-sulphur oxygen converter steel
von: A. S. Vergun, et al.
Veröffentlicht: (2012)

Integral Estimation of Harmful Blow-Out With Consideration of Combined Action of Toxical Pollutants
von: S. D. Tsybulja, et al.
Veröffentlicht: (2014)

Industrial researches of features of influence of electric impacts on the number of metal drops in slag at the top oxygen blowing
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Evolution of discrete local levels into an impurity band in solidified inert gas solution
von: Kosevich, A.M., et al.
Veröffentlicht: (2007)

The gas-saturation of metal in conditions of different technologies of basic oxygen process
von: V. P. Korchenko, et al.
Veröffentlicht: (2012)

The study of peculiarities of formation and removal of droplets by blowing one- and two-phase liquids on the model of the LD-Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Providing safety and safe keeping of blast furnaces lining of at blow-out and blowing in
von: V. I. Bolshakov, et al.
Veröffentlicht: (2009)

Cooperative effect of displacement damage and inert gas impurities on deuterium retention in austenitic and ferritic-martensitic steels
von: Karpov, S.A., et al.
Veröffentlicht: (2014)