Buchumschlag

Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	S. V. Bobyr, E. E. Nefedeva, M. F. Evsjukov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839799
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Analysis of phase-structural transformations during cooling of steels, taking into account the deformations and stresses
von: S. V. Bobyr, et al.
Veröffentlicht: (2018)

The modeling and optimization of tempering 17H5MA tool hot deformation
von: S. V. Bobyr, et al.
Veröffentlicht: (2015)

Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
von: S. V. Bobyr, et al.
Veröffentlicht: (2012)

Low carbon steel for hot metal deformation tools (review)
von: S. V. Bobyr, et al.
Veröffentlicht: (2019)

Phase-structure transformations in steel 150H7T at cooling
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

The research of temperature influence and tempering time on a structure and properties of steel to the instrument of hot deformation
von: E. E. Nefedeva, et al.
Veröffentlicht: (2014)

The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015)

The stamping steel for hot deformation with controlled austenit transformation
von: K. O. Hohaiev, et al.
Veröffentlicht: (2014)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)

The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
von: S. V. Bobyr
Veröffentlicht: (2014)

Heredity and transformation of cast steel structure at hot deformation and thermal treatment
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2009)

External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
von: Janutienë, R.K., et al.
Veröffentlicht: (2015)

Structure-phase transformations in the quenched constructional steel at deformation
von: Ju. F. Ivanov, et al.
Veröffentlicht: (2009)

Die Steel with Regulated Austenitic Transformation for Hot Deformation of Copper-Nickel Alloy
von: K. O. Gogaev, et al.
Veröffentlicht: (2022)

Instrumental stamp steels for hot deformation (review)
von: K. O. Hohaiev, et al.
Veröffentlicht: (2016)

Formation of deformation martensite in the chromium-nickel austenitic steels
von: H. V. Snizhnoi
Veröffentlicht: (2011)

Structure of multilayer specimens, simulating surfaced tools for hot deforming of metals
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2013)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

The influence of loading on the deformation of surface layer of steels with boron-chromium coating
von: L. A. Arendar, et al.
Veröffentlicht: (2011)

Phase transformations in low-carbon steels, alloyed a manganese
von: M. F. Evsjukov, et al.
Veröffentlicht: (2012)

Effect of hot plastic deformation and heat treatment on structure and mechanical properties of steels for railway wheels
von: A. I. Babachenko, et al.
Veröffentlicht: (2012)

On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
von: M. F. Evsjukov, et al.
Veröffentlicht: (2014)

The influence of phase-structural state of chromium steels on their corrosion behaviour in lead melts
von: V. M. Fedirko, et al.
Veröffentlicht: (2018)

Kinetics of Phase Transformations During Cooling-Warming of Saccharomyces cerevisiae Cells in Alginate-Containing Cryoprotective Media
von: V. L. Ponomareva, et al.
Veröffentlicht: (2018)

Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)

Computer and experimental studies on the distribution of hardness of a steel tool body caused by phase transformations during the induction hardening
von: V. A. Dutka, et al.
Veröffentlicht: (2012)

Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)

Phase Transformations, Structure, and Properties of the Chromium-Based Kh65NVFT Alloy
von: A. M. Adaskin, et al.
Veröffentlicht: (2013)

Structural and phase transformations in alloys under the severe plastic deformation
von: I. E. Volokitina
Veröffentlicht: (2023)

Dependence of the kinetics of eutectic and eutectoid phase transformations on the cooling rate
von: O. G. Sidorenko, et al.
Veröffentlicht: (2013)

Carbides transformations in obtaining a chromium carbide steel of the eutectic type
von: O. M. Shevchenko, et al.
Veröffentlicht: (2015)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
von: O. M. Moroz, et al.
Veröffentlicht: (2015)

Influence on bainitic hardening properties and structural states of reinforcing rolled steel 30GS
von: G. V. Levchenko, et al.
Veröffentlicht: (2014)

Research of the effect of the cooling rate during solidification of a continuously cast billet on the features of the dendritic structure of carbon steel
von: O. I. Babachenko, et al.
Veröffentlicht: (2020)

Phase change features in the course of restoration of a scale of a rapid tool steel
von: S. M. Grigorev, et al.
Veröffentlicht: (2011)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)

Analytical models of austenite transformation in steel with allowance for internal stresses
von: S. V. Bobyr
Veröffentlicht: (2018)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)

On the kinetics of phase transformations in high-tensile cast irons with heat recalescence considering
von: M. F. Evsjukov, et al.
Veröffentlicht: (2012)