Cover Image

Formation of eutectic composite coatings by high-speed melting

Saved in:

Bibliographic Details
Date:	2014
Main Authors:	S. V. Litovchenko, V. M. Beresnev, V. A. Chishkala, I. A. Manucharjan
Format:	Article
Language:	English
Published:	2014
Series:	Physical surface engineering
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000971651
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Corrosion-resistant coatings based on polymer-bitumen composition with high speed of formation
by: V. A. Chervatiuk, et al.
Published: (2013)

The influence of alloying on eutectic carbides nature in high-speed steels
by: A. A. Glotka, et al.
Published: (2018)

Obtaining and physical and mechanical properties of oxide-silicide coatings on molybdenum
by: S. V. Litovchenko, et al.
Published: (2013)

On High Thermal Diffusion Mobility of Sulfur in Iron-Carbon Melts and Findings in the Oxidation and Decarbonizing Speed Dependences of the Melt
by: A. M. Skrebtsov, et al.
Published: (2016)

Corrosion stability of molybdenum and tungsten coatings in lead-bismuth eutectic
by: Azhazha, V.M., et al.
Published: (2005)

Features of the destruction of silicide coatings under dynamic mechanical loads
by: N. A. Azarenkov, et al.
Published: (2012)

Behavior of molybdenum-silicide-coated composites under mechanical and thermal stresses
by: S. V. Litovchenko, et al.
Published: (2011)

The primary phase part in microstructure formation of in-situ eutectic composite of LaB₆-ZrB₂
by: Ereshchenko, A.A., et al.
Published: (2005)

The influence of the melts of lead and eutectics lead-bithmus on fatigue life of martensitic and austenitic steels
by: O. I. Yaskiv, et al.
Published: (2014)

Titanium-based high-melting nanodispersed compositions obtaining and study
by: Bolshakov, V.I., et al.
Published: (2018)

The effect of nickel on the structure of Al0.878Si0.122 eutectic melt
by: S. I. Mudryi, et al.
Published: (2015)

Eutectic formation in the Al – Mg – Si system
by: O. I. Trudonoshyn
Published: (2015)

Investigation of the influence of high-speed sintering modes on the structure and properties of WC-based carbide composite with high entropy bonding
by: O. A. Yurkova, et al.
Published: (2024)

New directions of work SPE &quot;Eltechmash&quot; for recovery of perspective materials and coatings by electron-beam melting methodsand high speed evaporation-condensation in vacuum
by: I. N. Grechanjuk
Published: (2018)

Formation of composite tribotechnical coatings for operation under high temperature including stress-deformation condition
by: S. V. Fedorchuk
Published: (2009)

Peculiarities of formation and properties of boron-chromium coatings, obtained on steels in lithium melt
by: V. V. Shyrokov, et al.
Published: (2010)

Formation of superhard state of the TiZrHfNbTaYN vacuum–arc high-entropy coating
by: V. M. Beresnev, et al.
Published: (2018)

Corrosion resistance and protective properties of chromium coatings electrodeposited from an electrolyte based on deep eutectic solvent
by: Protsenko, V.S., et al.
Published: (2018)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
by: M. I. Pashechko
Published: (2010)

High-speed multicolour photometry with CMOS cameras
by: S. M. Pokhvala, et al.
Published: (2012)

Physical properties of the eutectic NaF-LiF-LaF3 melt ionic liquid system
by: Yu. O. Plevachuk, et al.
Published: (2013)

Physical properties of the eutectic NaF-LiF-LaF3 melt ionic liquid system
by: Yu. O. Plevachuk, et al.
Published: (2012)

High-speed multicolour photometry with CMOS cameras
by: Pokhvala, S.M., et al.
Published: (2012)

Silicide coatings on molybdenum: preparation, structure, properties
by: S. V. Litovchenko, et al.
Published: (2012)

High-speed gas injector for powerful plasmadynamic systems
by: Staltsov, V.V., et al.
Published: (2015)

On movement of acoustic emission waves at high speeds
by: Ja. Nedoseka, et al.
Published: (2013)

Nanocrystalline coatings by vacuum-arc method with usage of high frequency voltage
by: P. V. Turbin, et al.
Published: (2006)

Mechanical characteristics of quasibinary eutectic composites with regard for the influence of an intercomponent interaction at the interface
by: D. A. Zakarjan
Published: (2014)

The peculiarities of speed melting and solidification of non-metallic inclusions under laser treatment of steel
by: S. I. Hubenko, et al.
Published: (2017)

Research of friction properties of composite coatings obtained by a vacuum – arc method
by: V. M. Beresnev, et al.
Published: (2003)

Modeling and application of high-speed processes of explosion welding of materials
by: G. V. Smirnov, et al.
Published: (2009)

Features of hardening high-speed steels at electroslag remelting
by: V. H. Delievi, et al.
Published: (2010)

Influence of increased sliding speed on the structure and properties of piston rings with ion-plasma coating
by: Skoblo, T.S., et al.
Published: (2018)

Peculiarities of Formation and Melting of Cluster Phase in Highly Concentrated Cryoprotectant Solutions
by: S. S. Sevastjanov, et al.
Published: (2018)

High-speed optical recording in vitreous chalcogenide thin films
by: A. A. Kryuchyn, et al.
Published: (2014)

High-Speed Solar Wind and Geomagnetic Activity
by: M. R. Oljak
Published: (2015)

HIGH-SPEED SOLAR WIND AND GEOMAGNETIC ACTIVITY
by: Olyak, M. R.
Published: (2015)

High-speed optical recording in vitreous chalcogenide thin films
by: Kryuchyn, A.A., et al.
Published: (2014)

Formation of high-dispersion state in plasma-detonation coatings of aliminum oxyde
by: A. D. Pogrebnjak, et al.
Published: (2006)

THE INTERACTION OF TUNGSTEN (VI) OXIDE AND CALCIUM TUNGSTATE IN THE CaCl2–NaCl EUTECTIC MELT
by: Medvezhynska, Olha, et al.
Published: (2023)