Surface laser treatment of sintered alloy Cu—30% (wt. ) Cr

Surface laser treatment of sintered alloy Cu—30% (wt. ) Cr

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	V. P. Korzhov
Format:	Artikel
Sprache:	English
Veröffentlicht:	2014
Schriftenreihe:	Electrical Contacts and Electrodes. Series : Composite, Layered and Gradient Materials and Coatings
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001168071
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Melting behavior and heat Treatment of al-mg-si-mn casting alloy alloyed with 0,1 wt.%Ti and 0,1 wt.%zr
von: V. V. Bojko, et al.
Veröffentlicht: (2014)

Structure formation in iron alloys with Cr and Ti during laser chemical and heat treatment
von: N. V. Franchik, et al.
Veröffentlicht: (2011)

Laser treatment as an additional method to increase the tribotechnical properties of alloys based on cast irons alloyed with Cu and S
von: E. A. Markovskij, et al.
Veröffentlicht: (2017)

Phase and structural evolution during mechanical alloying, subsequent annealing and pressure sintering of AlCuNiFeCr high entropy alloy
von: O. I. Yurkova, et al.
Veröffentlicht: (2015)

Hardening of steel 40Cr by combined treatment using laser.
von: A. F.I. Idan, et al.
Veröffentlicht: (2016)

The research results of influence conditions of sintering of VN20 (80% WC + 20 % WT. NI) hard alloy in vacuum under external uniaxial static pressure on its shrinkage and density
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Structural and Phase Relaxation in Superplastic Eutectic Alloy Sn—38% wt. Pb
von: V. F. Korshak, et al.
Veröffentlicht: (2015)

High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys obtained by mechanical alloying and subsequent sintering
von: V. V. Cherniavskyi, et al.
Veröffentlicht: (2018)

Hydrogen Sorption Properties and Thermal Stability of Mechanical Alloy Fabricated by Milling of Mg + 10 wt.% TiH2 + 10 wt.% Fe Powders' Mixture
von: V. D. Dobrovolskyi, et al.
Veröffentlicht: (2013)

Structure and properties of the diamond-WC–6Co somposite doped by 1.5 wt % of CrSi2
von: A. F. Lisovskij, et al.
Veröffentlicht: (2016)

Лазерная обработка поверхности спеченного сплава Cu-30% (мас.) Cr
von: Коржов, В.П.
Veröffentlicht: (2014)

Laser surface alloying of steel products (Review)
von: A. V. Bernatskij
Veröffentlicht: (2013)

Structure of surfaced zone of cast high-nickel alloy KhN56MBYuDSh after laser surface treatment
von: A. A. Polishko, et al.
Veröffentlicht: (2014)

Local Melting of Coarse-Grained Al—4 wt.% Ge Alloy as a Cause for Superplasticity Appearance
von: V. V. Brjukhovetskij, et al.
Veröffentlicht: (2012)

Stochastic characteristics of a WT rotor mechanical loads
von: P. P. Pekur
Veröffentlicht: (2014)

Structure and tribological characteristics of heterogeneous alloy before and after laser treatment
von: V. H. Novytskyi, et al.
Veröffentlicht: (2011)

Effect of quasi-hydrostatic extrusion on microhardness in CuCrZr alloy
von: Belyaeva, A.I., et al.
Veröffentlicht: (2015)

Optimization of conductive monotectic Cu-(FeCr-C) alloys composition
von: V. V. Khristenko, et al.
Veröffentlicht: (2015)

Influence of laser treatment of surface on a structure and wearproof of chromic cast-iron
von: V. A. Loktionov-Remizovskyi, et al.
Veröffentlicht: (2009)

The effect of Fe and Y on the hydrogen sorption properties, thermal stability, and kinetics of hydrogen desorption from the MgH2 hydride phase of a mechanical alloy Mg+10%wt.Fe+5%wt.Y
von: O. H. Yershova, et al.
Veröffentlicht: (2020)

THE EFFECT OF Fe AND Y ON THE HYDROGEN SORPTION PROPERTIES, THERMAL STABILITY, AND KINETICS OF HYDROGEN DESORPTION FROM THE MgH2 HYDRIDE PHASE OF A MECHANICAL ALLOY Mg + 10%wt.Fe + 5%wt.Y
von: Ershova, О., et al.
Veröffentlicht: (2020)

Structure of diffusion layers of iron alloys after laser treatment in saturation atmosphere
von: Ye. V. Ivashchenko, et al.
Veröffentlicht: (2009)

Laser and laser-microplasma alloying of surface of steel 38KhN3MFA specimens
von: V. D. Sheljagin, et al.
Veröffentlicht: (2014)

Study of characteristics of Al + 5 wt.% TiO₂ + 6 wt.% Gr hybrid p/m composite powders prepared by ball milling process
von: Ravichandran, M., et al.
Veröffentlicht: (2015)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

Microstructure of Co-Cr dental alloys manufactured by casting and 3D selective laser melting
von: M. O. Vasylyev, et al.
Veröffentlicht: (2022)

Combined laser-microplasma surfacing using powders of the Ni–Cr–B–Si system
von: Ju. S. Borisov, et al.
Veröffentlicht: (2012)

Thermobaric sintering of cBN-Cr3C2 composite
von: K. V. Slipchenko, et al.
Veröffentlicht: (2017)

The features of structure formation at synthesis of high entropy alloys of Al – Cr – Fe – Ni – Cu, Al – Ti – Cr – Fe – Ni – Cu and Ti – Cr – Fe – Ni – Cu systems by means of powder metallurgy
von: H. A. Bahliuk, et al.
Veröffentlicht: (2015)

Residual stresses and mechanical properties of turbine blades after laser treatment of surface
von: Ja. Dzjankhua, et al.
Veröffentlicht: (2010)

Study of characteristics of Al + 5 wt.% TiO2 + 6 wt.% Gr hybrid p/m composite powders prepared by ball milling process
von: M. Ravichandran, et al.
Veröffentlicht: (2015)

The surface thermal treatment of powder iron-carbon alloys
von: A. V. Minitskyi, et al.
Veröffentlicht: (2015)

The anomalous increasing of microhardening in surface layers of aluminium alloys after the laser alloying by copper and iron
von: V. V. Girzhon, et al.
Veröffentlicht: (2009)

Results of sintering and properties of sinter made from the charge, prepared with the use of surface-active agents
von: A. S. Nesterov, et al.
Veröffentlicht: (2012)

Formation of Structure and Phase Composition of Nanocrystalline CuNiAlFeCr Alloy by the Mechanical Alloying Method
von: A. I. Jurkova, et al.
Veröffentlicht: (2014)

Comparing power characteristics of orthogonal WT's blades of various types
von: A. I. Jakovlev, et al.
Veröffentlicht: (2014)

Structure of laser welded joints of multicomponent high-entropy alloy of Nb-Cr-Ti-Al-Zr system
von: V. D. Sheliahin, et al.
Veröffentlicht: (2021)

Oxidation of sintered VT1-0 titanium alloys
von: Kh. S. Shliakhetka, et al.
Veröffentlicht: (2018)

Structure and mechanical properties of high-entropy AlCuNiFeCr and AlCuNiFeCrTi coatings obtained by electron beam surfacing
von: O. I. Yurkova, et al.
Veröffentlicht: (2017)

Plasma-surface interaction of electric arc discharge between composite Cu-Cr electrodes
von: Murmantsev, A., et al.
Veröffentlicht: (2020)