Buchumschlag

Influence of the tool shape and location of cutters in it on the force distribution between the cutters at drilling gas-drainage boreholes

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	V. G. Krasnik
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Geo-Technical Mechanics
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000167477
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Research of technological parameters of blasthole drilling with cutter drilling bits which have pins of different regidity
von: V. G. Synkov, et al.
Veröffentlicht: (2016)

Shaft cutters for geological exploration
von: V. I. Spirin, et al.
Veröffentlicht: (2017)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
von: B. V. Stefaniv
Veröffentlicht: (2013)

Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
von: B. C. Liu, et al.
Veröffentlicht: (2017)

Development of technology of brazing of diamond-hardalloy cutters
von: B. F. Stefaniv
Veröffentlicht: (2013)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
von: N. E. Stakhniv, et al.
Veröffentlicht: (2019)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Effect of damping properties of cutters on the probability of failure of the CBN plates
von: L. M. Devin, et al.
Veröffentlicht: (2016)

Comparative analysis of performance of cubic boron nitride and microcrystalline alumina tools in profile grinding of form cutters
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

An increase of operating characteristics of cBN cutters by improving their damping properties
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Optimization of designing on cutter parameters of PCD saw blades by simulation analysis
von: X. Yang, et al.
Veröffentlicht: (2019)

Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)

Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)

Experience and perspectives of application with &quot;Turf Cutter” soil decontamination technology
von: Ju. A. Kutlakhmedov, et al.
Veröffentlicht: (2015)

Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: V. L. Anosov, et al.
Veröffentlicht: (2019)

Pneumohydrodynamic impact on the surface methane drainage borehole 1185-D
von: R. A. Agaev
Veröffentlicht: (2013)

Peculiarities of calculating the geometric parameters of a diamond cutter for the formation of ring Fresnel lenses
von: Зенін, В. М., et al.
Veröffentlicht: (2024)

Experience of drilling of hidden-directed and horizontal boreholes
von: Ye. R. Mrozek, et al.
Veröffentlicht: (2019)

Development and implementation of «logging-while-drilling» technology in Ukraine. Methods and tools for determination of petrophysical parameters of reservoirs while drilling vertical, deviated and horizontal oil-and-gas boreholes
von: Bondarenko, M,S,, et al.
Veröffentlicht: (2025)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
von: L. V. Sudnik, et al.
Veröffentlicht: (2017)

Effect of structure of joint zone of diamond layer with hard-alloy substrate of brazed cutters on their service life
von: B. V. Stefaniv, et al.
Veröffentlicht: (2018)

Dynamics of near borehole zone while drilling poroelastic layer
von: Shelukhin, V. V., et al.
Veröffentlicht: (2012)

Dynamics of near borehole zone while drilling poroelastic layer
von: V. V. Shelukhin, et al.
Veröffentlicht: (2012)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
von: H. P. An, et al.
Veröffentlicht: (2014)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
von: N. E. Stakhniv
Veröffentlicht: (2017)

Mathematical minerals distributing model by means of spline-interlineation functions methods on a irregular located inclined boreholes system
von: Литвин, О. О., et al.
Veröffentlicht: (2015)

Mathematical minerals distributing model by means of spline-interlineation functions methods on a irregular located inclined boreholes system
von: Литвин, О. О., et al.
Veröffentlicht: (2015)

Mathematical minerals distributing model by means of spline-interlineation functions methods on a irregular located inclined boreholes system
von: O. O. Lytvyn, et al.
Veröffentlicht: (2013)

ISM high-performance tools for drilling of oil and gas wells. Review
von: N. A. Bondarenko
Veröffentlicht: (2018)

Effective rock cutting tool for drilling small diameter for oil and gas
von: Ju. E. Budjukov, et al.
Veröffentlicht: (2016)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters
von: M. Enek, et al.
Veröffentlicht: (2014)

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

Influence of structure of hybrid super hard material on the performance of drilling tool
von: R. K. Bogdanov, et al.
Veröffentlicht: (2016)

Influence of Convector Location on the Room Temperature Distribution
von: O. S. Tsakanyan, et al.
Veröffentlicht: (2018)

Informativity of borehole geophysical methods in choosing the location of the main structures of the hydroelectric power plant (HPP)
von: Deyneko, S., et al.
Veröffentlicht: (2017)

Informativity of borehole geophysical methods in choosing the location of the main structures of the hydroelectric power plant (HPP)
von: S. I. Dejneko, et al.
Veröffentlicht: (2017)