Buchumschlag

The structure, physical-mechanical and frictional properties of Fe - Sі - B - C system sintered steels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	H. A. Bahliuk, S. H. Napara-Volhina, V. K. Kud
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000412211
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Physical and mechanical properties and structure of boron containing powder steels with high carbon contents
von: S. H. Napara-Volhina, et al.
Veröffentlicht: (2009)

Structure and properties of sintered manganese steels with different carbon contents
von: H. A. Bahliuk, et al.
Veröffentlicht: (2010)

The influence of the working layer thickness on the properties of hot-pressed powder layered composites
von: H. A. Bahliuk, et al.
Veröffentlicht: (2011)

The effect of ferrochrome content in the initial charge on the structure, mechanical and tribotechnical properties of Fe–Cr–C sintered carbide steel
von: Ye. S. Kyryliuk, et al.
Veröffentlicht: (2024)

Structure and physicochemical properties of Fe3Al intermetallide obtained by impact sintering
von: O. I. Tolochyn, et al.
Veröffentlicht: (2020)

Effect of Friction Time on Microstructure and Mechanical Properties of Friction Welded AISI 304 Stainless Steel to AISI 1060 Steel
von: Ates, H., et al.
Veröffentlicht: (2013)

Effect of Friction Time on Microstructure and Mechanical Properties of Friction Welded AISI 304 Stainless Steel to AISI 1060 Steel
von: H. Ates, et al.
Veröffentlicht: (2013)

Influence of annealing in vacuum on structure, physical and mechanical properties and performance sustainability instrument sintered in hydrogen from the alloy VK10 om for friction welding with stirring
von: O. V. Kharchenko
Veröffentlicht: (2016)

Spark plasma sintering of Cu–(LaB6–TiB2) metal-ceramic composite and its physical-mechanical properties
von: T. O. Soloviova, et al.
Veröffentlicht: (2019)

Structure and properties of the eutectic composite B4C – TiB2 prepared by spark plasma sintering
von: P. I. Loboda, et al.
Veröffentlicht: (2011)

Physical and chemical models for expert evaluation of mechanical properties of structural steels
von: A. A. Kononenko, et al.
Veröffentlicht: (2018)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Features of the formation of structure in the sintering of multicomponent iron-glass composites
von: H. A. Bahliuk, et al.
Veröffentlicht: (2016)

Effect of Liquid Salt Bath Nitrocarburizing on Mechanical Properties of Low-Alloy Sintered Steels
von: Serrai, S., et al.
Veröffentlicht: (2018)

The influence of mechanical activation modes of charge on the structure and phase composition of sintered multi-component titanium-based composites
von: O. V. Baranovska, et al.
Veröffentlicht: (2021)

Properties of friction surfaces of the bronze-steel pair
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2013)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Physico-mechanical and physicochemical interaction at sintering of cBN-TiB₂ composites under ultrahigh pressure
von: Garbuz, T.O., et al.
Veröffentlicht: (2007)

Effect of sintering conditions on physical properties of carbonated hydroxyapatite ceramics
von: Tkachenko, M.V., et al.
Veröffentlicht: (2008)

HP-HT sintering, microstructure, and properties of B6O and TiC-containing composites based on cBN
von: D. V. Turkevich, et al.
Veröffentlicht: (2015)

Effect of multi-pass friction stir processing on the microstructure and mechanical properties of dual phase steel
von: T. Kucukomeroglu, et al.
Veröffentlicht: (2018)

Internal friction and Young’s modulus in Invar Fe-Ni-C alloys
von: Nadutov, V.M., et al.
Veröffentlicht: (2004)

Effects of sintering temperature and addition of Fe and B4C on hardness and wear resistance of diamond reinforced metal matrix composites
von: M. Şimşir, et al.
Veröffentlicht: (2013)

Comparative analysis of structure and properties of electrodeposited coatings from iron and Fe – Cr – Ni alloy
von: Ye. V. Kolesnyk, et al.
Veröffentlicht: (2016)

High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)

Properties of permanent magnets of the Nd-Fe-B system alloyed with Cu, Ti, C, which are obtained by a powder method or sintering of films in high-pressure conditions
von: G. P. Brekharja, et al.
Veröffentlicht: (2014)

Sintering of tetragonal zirconia nanopowders. Sintering mechanisms and the role of mechanical grinding
von: M. V. Lakusta, et al.
Veröffentlicht: (2016)

The effect of overheating and cooling rate on the structure and properties of Fe – B alloys
von: Yu. Filonenko, et al.
Veröffentlicht: (2019)

Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel
von: Bang, HanSur, et al.
Veröffentlicht: (2016)

Mechanical properties of AlCoFeCrVNi and AlCoFeCrVTi highentropy lloys obtained by sintering under pressure
von: O. I. Yurkova, et al.
Veröffentlicht: (2019)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

Structure and properties of coatings Ni-Cr-B-Si-Fe-WC-Co deposited on steel and copper substrates
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2008)

Producing of long semi-products of sintered titanium alloys by using friction welding
von: A. E. Kapustjan
Veröffentlicht: (2015)

The effect of friction treatment on structure and mechanical properties of nickel and nickel-chromium coatings on copper
von: S. I. Sydorenko, et al.
Veröffentlicht: (2013)

Physical-mechanical and tribotechnical properties| of composition materials on the basis of corrosion resistant steels
von: R. V. Yakovenko, et al.
Veröffentlicht: (2013)

cBN based materials with TiN-Al binder phase: sintering, structure, properties
von: K. V. Slipchenko, et al.
Veröffentlicht: (2019)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

The structure and properties formation of titanium-matrix composite depending on the method of sintering
von: Ye. H. Byba, et al.
Veröffentlicht: (2014)

Synthesis of TiC0.5–Al and effect of sintering temperature on mechanical properties of PcBN composites
von: Hu Xixi, et al.
Veröffentlicht: (2023)

Structure and properties of bimetals dried by friction with mixing
von: G. M. Grigorenko, et al.
Veröffentlicht: (2018)