Buchumschlag

The effect of high heating rates on homogenization temperature range of austenite and secondary grain growth in carbon steels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	O. M. Savytskyi, Yu. M. Shkrabaliuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000412237
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The effect of heating temperature and carbon content on the growth of austenite grains in carbon steels for manufacture of railway wheels
von: A. I. Babachenko, et al.
Veröffentlicht: (2015)

Influence of a kind treatment on the austenite grain high carbon steel
von: E. V. Parusov, et al.
Veröffentlicht: (2014)

Features of the influence of carbon on the kinetics of the transformation of supercooled austenite in the diffusion and the intermediate areas
von: O. M. Savytskyi, et al.
Veröffentlicht: (2013)

Features of influence of the austenitizing temperature on the grain size chrome-molybdenum-vanadium steel
von: V. A. Lutsenko, et al.
Veröffentlicht: (2015)

The influence of austenitization temperature and the rate of cooling on the structure of chrome-molybdenum-vanadium steel
von: V. A. Lutsenko, et al.
Veröffentlicht: (2017)

Austenite Grain Growth Behavior of 20Mn5 Steel Used for Heavy Hydro-Generator Shaft
von: Liu, M., et al.
Veröffentlicht: (2018)

Change in the ductility characteristics of austenitic steels during deformation at different rates
von: Shinkarenko, E.T.
Veröffentlicht: (1985)

Secondary hardness and heat resistance of high-speed steels
von: O. V. Movchan, et al.
Veröffentlicht: (2020)

Structural changes of austenitic steel during long term high-temperature operation
von: O. D. Smiian, et al.
Veröffentlicht: (2011)

Application of nitride dispersion strengthening in creating Cr – Mn – N austenitic steels for high-temperature Heat Power Engineering
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2012)

Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
von: V. Kirots, et al.
Veröffentlicht: (2012)

Influence of ferrite grain size on heat resistance characteristics of carbon steel boiler tubes
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)

The behavior of alloyed carbides during austenitizing steel under rapid heatings
von: Yu. Volosevych
Veröffentlicht: (2015)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Deformation and fracture of high-temperature steels at different temperatures and loading rates
von: Kondryakov, E.A., et al.
Veröffentlicht: (2009)

Features of joint influence of heating and cooling speed on structure formation in carbonaceous steels at local thermal influence
von: O. M. Savytskyi, et al.
Veröffentlicht: (2011)

Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)

On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
von: M. F. Evsjukov, et al.
Veröffentlicht: (2014)

Dependence of corrosion behaviour of austenitic chromium-nickel steels on the paramagnetic state of austenite
von: H. V. Snizhnoi
Veröffentlicht: (2013)

Mechanical and functional properties of Cr-(Ni)-Mn-N austenitic heat-resistant steels
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2019)

Increase of heat resistance and properties of die steel with control of austenitic transformation during operation
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2019)

Protection of casted steel from secondary oxidation and heat losses
von: A. P. Bochek, et al.
Veröffentlicht: (2012)

Phase transformations of austenitic stainless modified steels
von: Ye. H. Aftandiliants
Veröffentlicht: (2019)

Thermomechanical strengthening of steels with low stability austenite
von: A. S. Opalchuk, et al.
Veröffentlicht: (2016)

Influence of heat treatment on local fracture susceptibility of HAZ metal of titanium-stabilized austenitic steel
von: Ju. V. Poletaev
Veröffentlicht: (2012)

Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
von: He, T., et al.
Veröffentlicht: (2017)

Increasing mechanical properties of low carbon steels with reducing grains size
von: A. S. Opalchuk, et al.
Veröffentlicht: (2013)

Structure, Phase Composition of Supercooled Austenite, and Kinetics of Its Decomposition in Perlite Temperature Range of Chromium–Manganese Cast Iron
von: Kutsova, V.Z., et al.
Veröffentlicht: (2018)

Structure homogeneity and low-temperature micromecanical properties of ultrafine-grained magnesium alloy AZ31
von: Ju. Z. Estrin, et al.
Veröffentlicht: (2011)

Mammalian Oocytes Freezing Within a Wide Range of Heat Exchange Rates
von: A. S. Salina, et al.
Veröffentlicht: (2005)

Formation of semiconducting nano-structures on the surface of austenite steel
von: S. V. Nesterenko, et al.
Veröffentlicht: (2007)

The stamping steel for hot deformation with controlled austenit transformation
von: K. O. Hohaiev, et al.
Veröffentlicht: (2014)

ESR of electrodes compacted of austenite stainless steel chips
von: V. A. Shapovalov, et al.
Veröffentlicht: (2011)

Formation of deformation martensite in the chromium-nickel austenitic steels
von: H. V. Snizhnoi
Veröffentlicht: (2011)

Models and characteristics of discontinuous transformation of austenite in iron–carbon alloys
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

On the mechanism of influence of the grain size of ferrite on the fatigue strength low carbon steel
von: O. N. Perkov, et al.
Veröffentlicht: (2014)

Cryogenic Fracture Behavior of Metastable Austenitic Stainless Steel in a High Magnetic Field
von: Shindo, Y., et al.
Veröffentlicht: (2010)

Studying the cooling rate effect within different temperature range on platelet damage extent
von: T. M. Hurina, et al.
Veröffentlicht: (2007)

The influence of lead melt on embrittlement of ferritic and austenitic chromium steels
von: V. M. Fedirko, et al.
Veröffentlicht: (2019)

Analytical models of austenite transformation in steel with allowance for internal stresses
von: S. V. Bobyr
Veröffentlicht: (2018)