Chill mould design for manufacture of vital figurine cast parts of power engineering

Chill mould design for manufacture of vital figurine cast parts of power engineering

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	B. P. Taran, V. V. Malakhov, K. O. Molodov
Format:	Artikel
Sprache:	English
Veröffentlicht:	2013
Schriftenreihe:	Journal of mechanical engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000450094
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Chill mould design for manufacture of vital figurine cast parts of power engineering
von: Таран, Борис Петрович, et al.
Veröffentlicht: (2014)

Criteria of selection of designs of cast moulds for centrifugal electroslag casting
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)

Self-hardening liquid glass moulding core sands used for casting manufacturing of power-generating equipment
von: A. K. Davidenko, et al.
Veröffentlicht: (2018)

Design principles of flask equipment for accelerated cooling of castings obtained by casting in vacuumized moulds
von: P. B. Kaljuzhnyj, et al.
Veröffentlicht: (2015)

Neckdown risers for die-casting mould casts
von: O. I. Voronova, et al.
Veröffentlicht: (2015)

Examples of Manufacturing Cast Parts for Wind Power Plants and Prospects for the Application of this LGM Process
von: V. S. Doroshenko
Veröffentlicht: (2020)

Influence of regulated cooling on quality of a rolling roll from chilled cast iron
von: V. E. Khrychikov, et al.
Veröffentlicht: (2017)

Composite inserts for die casting moulds
von: V. V. Jasjukov, et al.
Veröffentlicht: (2015)

The Anthropomorphous Figurine from Zasullia-Mhar
von: Ya. V. Volodarets-Urbanovych
Veröffentlicht: (2016)

Quality of large- tonnage ingots in mould casting (Analytic review)
von: V. A. Shapovalov, et al.
Veröffentlicht: (2013)

Physique-technological aspects of solidification castings in the sandy mould
von: V. A. Mamishev, et al.
Veröffentlicht: (2014)

Use of 100 % recycled material in casting of gas-turbine-engine parts
von: A. V. Elkin, et al.
Veröffentlicht: (2011)

Antropomorphous Figurines from Trypillia Culture Site Nebelivka
von: N. B. Burdo
Veröffentlicht: (2014)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Research control method of castings the crystallization process in vacuumized moulds
von: P. B. Kaljuzhnyj, et al.
Veröffentlicht: (2015)

Automated designing of heat-resistant alloy composition on nickel base for manufacture of all-cast nozzle appliances
von: S. V. Gajduk, et al.
Veröffentlicht: (2017)

Methodology of design-engineering planning and making of the shortcircuited cast rotor for asynchronous electric motors
von: O. A. Chibichik, et al.
Veröffentlicht: (2011)

Casting in shell moulds which are got an impregnation binder dry sand
von: V. S. Doroshenko, et al.
Veröffentlicht: (2009)

Influence of modifiers at in-mould graphitizing modifying on ductile cast iron structure
von: V. B. Bublikov, et al.
Veröffentlicht: (2014)

Physique-mathematical aspects of solidification castings the different geometry in the sandy mould
von: V. A. Mamishev, et al.
Veröffentlicht: (2014)

Kinetics of Crystallization of a Bulk-Amorphized Cu47Ni8Ti34Zr11 Alloy in Conditions of Chill Casting
von: A. B. Lysenko, et al.
Veröffentlicht: (2014)

The Serezliivka Type Figurines as an Evidence of Contacts During the Late Eneolithic
von: Yu. Ya. Rassamakin
Veröffentlicht: (2021)

Technologies of manufacturing lining elements by the method of electroslag hardfacing in a current-conducting mould
von: A. V. Netiaha, et al.
Veröffentlicht: (2022)

Thermophysical aspects of intensification for solidification of steel and cast iron castings in siliceous sand moulds. Announcement 3
von: V. A. Mamishev, et al.
Veröffentlicht: (2015)

Effect of mixture fusion on the shape of graphite in cambered chilled rolls
von: I. A. Kurkostriga, et al.
Veröffentlicht: (2011)

Computer-Integrated simulation of the process of cooling and crystallization of pistons in chill
von: I. G. Gusau, et al.
Veröffentlicht: (2016)

In-mould graphitizing, spheroidizing, and carbide stabilizing inoculation of cast iron melt
von: M. A. Fesenko, et al.
Veröffentlicht: (2020)

Control of casting solidification and cooling in silica sand moulds due to it fluidization
von: P. B. Kaljuzhnyj, et al.
Veröffentlicht: (2015)

Fluidized bed application of in technological process of casting production in vacuumized moulds
von: I. A. Shalevskaja, et al.
Veröffentlicht: (2015)

structure and microhardness of the al-mn alloys, with compounds of eutectic and peritectic transitions zone at chill mold casting under constant magnetic field superimposition
von: V. I. Dubodelov, et al.
Veröffentlicht: (2014)

The problem aspects of improving technology of making castings in the moulds from quartz sand
von: V. A. Mamishev, et al.
Veröffentlicht: (2016)

Evaluation of the possibility of manufacturing and repairing engine parts from aluminium alloys by method of additive technology
von: M. O. Gnatenko, et al.
Veröffentlicht: (2018)

Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture
von: K. O. Kostyk
Veröffentlicht: (2013)

Terracotta Figurines Depicting ‘Drunk Hercules' from Northern Black Sea Region
von: K. Savelieva
Veröffentlicht: (2021)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Electron and proton transport in chloroplasts of pea plants after night exposures to chilling temperatures
von: A. V. Polishchuk, et al.
Veröffentlicht: (2020)

The applied aspects of rise quality castings in the time of solidification in the sandy moulds. Report 4
von: V. A. Mamishev, et al.
Veröffentlicht: (2015)

Role of cytokinins in the regulation the chilling stress response in Triticum aestivum and Triticum spelta
von: L. V. Voytenko, et al.
Veröffentlicht: (2024)

Role of cytokinins in the regulation the chilling stress response in Triticum aestivum and Triticum spelta
von: Voytenko, L.V., et al.
Veröffentlicht: (2024)