Buchumschlag

Welds formation in electron beam welding of heat resistant steels of grades 10Kh9MFBA and 10Kh12M

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	V. M. Nesterenkov, L. A. Kravchuk, Ju. A. Arkhangelskij, A. A. Bondarev
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000463436
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Mechanical properties of joints of heat-resistant steels of 10Kh12M, 10Kh9MFBA grades made by electron beam welding
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2013)

Investigation of deformational impact on 08Kh18N9 and 12Kh18N10T steels in welded vessels and pipes
von: L. M. Lobanov, et al.
Veröffentlicht: (2015)

The influence of water environment on weld metal gas saturation in underwater welding of 12Kh18N10T steel
von: Yu. Kakhovskyi
Veröffentlicht: (2015)

Influence of 12Kh18N10T steel fibers beam pressing on their structures and properties
von: V. A. Zorin, et al.
Veröffentlicht: (2014)

Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

Automatic submerged arc welding of bridge spans of high-quality steels 10KhSNDA and 15KhSNDA in field
von: D. P. Cheprasov, et al.
Veröffentlicht: (2018)

Laser welding of thin-wall filter elements of steel 08Kh18N10T
von: V. D. Sheljagin, et al.
Veröffentlicht: (2017)

Welded structures of austenite steel of 10Kh18N10T type under conditions of radiation-induced swelling
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)

Physicomechanical properties of 12Kh21N5T and 08Kh18N10T steels irradiated by a high-current tubular relativistic electron beam in ablation mode
von: V. V. Belozerov, et al.
Veröffentlicht: (2011)

Evaluation of stressstrain state of dissimilar welded joints of steels 10Kh13G18D+09G2S
von: A. I. Gedrovich, et al.
Veröffentlicht: (2010)

Corrosion-fatigue strength of T-joints of steel 12Kh18N10T and methods of its improvement
von: E. V. Kolomijtsev
Veröffentlicht: (2012)

Titanium-aluminide coatings on steel 12Kh18N10T with a barrier layer of titanium nitride
von: M. V. Arshuk, et al.
Veröffentlicht: (2011)

Delayer fracture resistance of welded joints of rotor steel 25Kh2NMFA after welding reheating
von: Ju. Skulskij, et al.
Veröffentlicht: (2019)

Electron beam welding of bodies of drill bits with zirconium modification of the weld metal
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2011)

Electroslag processing of Kh18N10T stainless steel shavings
von: O. V. Veretilnyk, et al.
Veröffentlicht: (2024)

Electron beam welding of centrifugal compressor impellers
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2016)

Steel-aluminium joints in heavy-loaded welded structures
von: A. A. Bondarev, et al.
Veröffentlicht: (2011)

Formation of welded joints of magnesium alloys in pulse multipass electron beam welding
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2017)

Effect of weld alloying on structure and properties of welded joints of steel 17Kh2M
von: L. I. Markashova, et al.
Veröffentlicht: (2011)

Investigation of acoustic emission characteristics of 12Kh18N10T steel at the temperature of 560° C. Information 2. Damageability and fracture prediction
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)

The influence of the laser alloying conditions on the parameters of wear resistance of 12Kh17T steel
von: Z. A. Duriahina, et al.
Veröffentlicht: (2011)

Peculiarities of welding joints of 15KH2M2FBS (P3) AND X10CrMoVNb91 (P91) STEELS
von: Yu. Skulskyi, et al.
Veröffentlicht: (2022)

Heat resistance steel titanoalitirovannoy 12X18H10T
von: M. V. Arshuk, et al.
Veröffentlicht: (2012)

Investigation of acoustic-emission characteristics of steel 12Kh18N10T at the temperature of 560 oC. Information 1. Methods and some results
von: Ja. Nedoseka, et al.
Veröffentlicht: (2011)

Structure and properties of steel 10G2FB welded joints made by arc welding
von: S. L. Zhdanov, et al.
Veröffentlicht: (2010)

Effect of austenization conditions on tendency of welded joints of the steel 03Kh16N9M2 to local fracture
von: Ju. V. Poletaev
Veröffentlicht: (2012)

The influence of the external polarization potential on tribo-corrosion behavior of 08Kh18N10T steel
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2018)

Effect of the modes of pulsed-arc welding on the parameters of weld and HAZ metal of welded joints made with Sv-08Kh20N9G7T wire
von: V. D. Poznjakov, et al.
Veröffentlicht: (2018)

Technological features of electron beam welding of wrought magnesium alloys in vacuum
von: A. A. Bondarev, et al.
Veröffentlicht: (2014)

NPP`s welding repair works using technology of mechanized underwater welding of corrosion-resistant steel type of high 18-10
von: Ju. Kakhovskij, et al.
Veröffentlicht: (2014)

Structure and properties of welded joints of 14KhGN2MDAFB steel in hybrid laser-arc welding
von: L. I. Markashova, et al.
Veröffentlicht: (2016)

Technological peculiarities of electron beam welding of drilling bits
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2009)

Effect of cooling cycle of welding on structurephase composition of 15Kh2NMFA steel
von: O. V. Makhnenko, et al.
Veröffentlicht: (2019)

Electron beam welding of large-size thick-walled structures of magnesium alloy
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2014)

Electron beam welding of thin-sheet three- dimensional structures of aluminium alloys
von: A. A. Bondarev, et al.
Veröffentlicht: (2011)

Electron beam welding of medium-pressure chamber of gas turbine engine
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2015)

Influence of pulsed-arc welding modes on the structure and mechanical properties of welds and haz metal of welded joints of 30KH2N2MDF steel
von: O. A. Haivoronskyi, et al.
Veröffentlicht: (2022)

Crystal structure of the new borocarbide Sm10B9C12
von: V. Babizhetskyi, et al.
Veröffentlicht: (2017)

Influence of technological and metallurgical factors on formation of copper welded joints in electron beam welding
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2021)

Effect of high-frequency mechanical vibrations of workpiece on structure and wear resistance of deposited metal Kh10R4G2S
von: G. V. Pokhmurskaja, et al.
Veröffentlicht: (2016)