Buchumschlag

Development of flux-cored wire of ferrite grade for hardfacing of parts of high-carbon steels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	Ja. P. Chernjak
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000464206
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Development of flux-cored wire for arc welding of high-strength steels of bainite class
von: V. N. Shlepakov, et al.
Veröffentlicht: (2011)

State-of the-art of developments and application of flux-cored wires for welding carbon and low-alloy steels
von: V. N. Shlepakov, et al.
Veröffentlicht: (2010)

Effect of aluminium additions to flux-cored wire on properties of high-carbon deposited metal
von: Ju. Krivchikov
Veröffentlicht: (2012)

Peculiarities of welding process using metal flux-cored wire of grade TMV5-MK
von: A. A. Goljakevich, et al.
Veröffentlicht: (2019)

Submerged-arc surfacing of higt-alloy steels by flux-cored wires
von: J.-M. Bonnel, et al.
Veröffentlicht: (2019)

Flux-cored wires, providing deposited metal with high resistance to adhesion wear
von: V. V. Osin
Veröffentlicht: (2015)

Influence of electric parameters of flux-cored wire arc surfacing on process stability and base metal penetration
von: Ju. N. Lankin, et al.
Veröffentlicht: (2014)

Flux-cored wires for wearand heat-resistant surfacing and spraying
von: Ju. S. Korobov, et al.
Veröffentlicht: (2017)

Flux-cored wires at world and regional markets of welding consumables
von: A. A. Mazur, et al.
Veröffentlicht: (2015)

Specifics of weld metal desulphurization in flux-cored wire welding
von: V. N. Shlepakov, et al.
Veröffentlicht: (2009)

Ways of improvement of corrosion resistance of coating deposited under flux with high-chromium cored wire
von: Yu. M. Kuskov, et al.
Veröffentlicht: (2019)

Structure and properties of the wear-resistant coatings fused on steel with flux cored wires by an electric arc method
von: V. E. Gromov, et al.
Veröffentlicht: (2014)

Effect of thermophysical properties of cores of self-shielding flux-cored wires on welding-technological properties
von: A. S. Kotelchuk
Veröffentlicht: (2016)

Flux-cored wire for wear-resistant surfacing of thin-sheet structures
von: A. A. Babinets, et al.
Veröffentlicht: (2017)

Peculiarities of thermal spraying of coatings using flux-cored wires (Review)
von: B. Vilage, et al.
Veröffentlicht: (2011)

Specific Boundaries in Ferrite of Low-Carbon Steels
von: G. D. Sukhomlin
Veröffentlicht: (2013)

Flux-cored wires of the FMI series for electric arc spraying of coatings (Review)
von: V. I. Pokhmurskij, et al.
Veröffentlicht: (2011)

Experience of production and application of seamless flux-cored wire for electric arc welding
von: V. N. Shlepakov, et al.
Veröffentlicht: (2011)

Experience in application of electric arc surfacing with flux-cored wire at the enterprises of Ukraine
von: A. A. Goljakevich, et al.
Veröffentlicht: (2016)

Welding and technological properties of flux-cored wire with the charge in the form of granular powder
von: I. O. Riabtsev, et al.
Veröffentlicht: (2024)

Application of mechanized welding with self-shielding flux-cored wire in repair of metallurgical equipment
von: V. N. Shlepakov, et al.
Veröffentlicht: (2013)

Application of complexly-alloyed powders, produced by the method of thermocentrifugal spraying, in flux-cored wires
von: A. P. Zhudra, et al.
Veröffentlicht: (2014)

Filler flux-cored wire for TIG welding and surfacing of titanium alloy VT22
von: S. V. Akhonin, et al.
Veröffentlicht: (2019)

Influence of ultradispersed carbides in flux-cored wires on the properties of heat-resistant deposited metal
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2009)

New flux-cored wire providing the effect of strain hardening of deposited metal in service
von: L. S. Malinov, et al.
Veröffentlicht: (2009)

Mechanical properties and corrosion resistance of electric arc coatings made of flux cored wires
von: V. M. Hvozdetskyi, et al.
Veröffentlicht: (2024)

Development of new generation flux-cored wires for gas-shielded arc welding of joints of low-alloy steels with ultimate strength of 640…940 MPa
von: V. M. Shlepakov, et al.
Veröffentlicht: (2021)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)

Argon arc welding of titanium alloy VT22 by using filler flux-cored wire
von: V. P. Prilutskij, et al.
Veröffentlicht: (2016)

Current directions of application of lux-cored wire welding of low-alloy increased and high strength steels
von: V. N. Shlepakov, et al.
Veröffentlicht: (2017)

Development of electric arc spray coatings for reconditioning rods of hydraulic cylinders of mining equipment, using flux-cored wires
von: T. R. Stupnitskij, et al.
Veröffentlicht: (2017)

EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
von: Kostiukov, I. A.
Veröffentlicht: (2014)

Structure and properties of metal, deposited by flux-cored wire with a charge of used metal-abrasive wastes
von: I. P. Lentjugov, et al.
Veröffentlicht: (2015)

Effect of methods of arc surfacing by flux-cored wire on penetration of base metal and formation of deposited metal
von: A. A. Babinets, et al.
Veröffentlicht: (2016)

Mechanical characteristics of sladed layers of core wire for mechanical vibration of parts
von: M. M. Student, et al.
Veröffentlicht: (2019)

On the mechanism of influence of the grain size of ferrite on the fatigue strength low carbon steel
von: O. N. Perkov, et al.
Veröffentlicht: (2014)

Features of the structure of plasma-arc coatings produced at application of flux-cored wires with a steel sheath and fller from 84C and ZR02 nanopowder
von: G. M. Grigorenko, et al.
Veröffentlicht: (2017)

Modern requirements for quality of wire rod wide Grades
von: I. N. Chujko
Veröffentlicht: (2015)

Research and developments of the E. O. Paton Electric Welding Institute in the field of electric arc welding and surfacing with flux-cored wire (Review)
von: I. K. Pokhodnja, et al.
Veröffentlicht: (2010)

Application of a complete factorial experiment to optimize the filling factor and charge density of the self-shielding flux-cored wire
von: І. O. Trembach, et al.
Veröffentlicht: (2024)