Buchumschlag

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	Ju. N. Nikitjuk, G. M. Grigorenko, V. I. Zelenin, E. V. Zelenin, M. A. Poleshchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000472872
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Restoration repair of slab copper moulds of MCCB. Structure and properties of metal in the joint zone
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Application of friction stir method for joining of magnesium alloys and their structure modifying
von: G. M. Grigorenko, et al.
Veröffentlicht: (2016)

Scheme of stressed-deformed condition of continuous-casted slab in technological casting lines
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2018)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
von: A. P. Verzilov
Veröffentlicht: (2019)

Simulation of solid shell deformation conditions in the billet continuous casters mould
von: A. N. Smirnov, et al.
Veröffentlicht: (2009)

Features of structure and properties of bimetal joints of dissimilar metals produced by friction stir welding process
von: G. M. Grigorenko, et al.
Veröffentlicht: (2013)

Autovacuum brazing in repair of copper panels of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Structure and properties of bimetals dried by friction with mixing
von: G. M. Grigorenko, et al.
Veröffentlicht: (2018)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
von: Uematsu, Y., et al.
Veröffentlicht: (2008)

Method for measuring heat and mass Transfer processes formation in the mold cast billets caster, cast with electromagnetic stirring metal in the crystallizer
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2014)

Physical modeling of the process of compression of continuously cast slabs and blooms during their crystallization
von: O. M. Smirnov, et al.
Veröffentlicht: (2017)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Alloying of surface layer of cast billet at casting
von: V. I. Tsotsko, et al.
Veröffentlicht: (2009)

Friction stir welding in aerospace industry (Review)
von: E. V. Sergeeva
Veröffentlicht: (2013)

Hybrid technology combining electron beam welding and friction stir welding in the processes of repair of aircraft structure elements of magnesium alloys
von: A. L. Majstrenko, et al.
Veröffentlicht: (2016)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Prospects for improving the quality of railway wheels made of a continuous casted billet
von: A. I. Babachenko, et al.
Veröffentlicht: (2013)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Quality of low-carbon rod produced from billets and bloom continuous castings
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Peculiarities of production of slab-type cast billets of VT1-0 and GRADE 2 types of low-grade spongy titanium
von: A. N. Kalinjuk, et al.
Veröffentlicht: (2018)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
von: D. A. Djudkin
Veröffentlicht: (2011)

Application of non-conducting consumable billets at electroslag surfacing in current-supplying mould
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2018)

Recent advances in the quantitative understanding of friction stir welding
von: De, A., et al.
Veröffentlicht: (2013)

Recent advances in the quantitative understanding of friction stir welding
von: A. De, et al.
Veröffentlicht: (2013)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)

Electroslag casting of billets of high-pressure stop valve bodies
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2009)