Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	Ju. N. Nikitjuk, G. M. Grigorenko, V. I. Zelenin, E. V. Zelenin, M. A. Poleshchuk
Format:	Artikel
Sprache:	English
Veröffentlicht:	2013
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000472872
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Restoration repair of slab copper moulds of MCCB. Structure and properties of metal in the joint zone
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

Application of friction stir method for joining of magnesium alloys and their structure modifying
von: G. M. Grigorenko, et al.
Veröffentlicht: (2016)

Scheme of stressed-deformed condition of continuous-casted slab in technological casting lines
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2018)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
von: A. P. Verzilov
Veröffentlicht: (2019)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Features of structure and properties of bimetal joints of dissimilar metals produced by friction stir welding process
von: G. M. Grigorenko, et al.
Veröffentlicht: (2013)

Simulation of solid shell deformation conditions in the billet continuous casters mould
von: A. N. Smirnov, et al.
Veröffentlicht: (2009)

Autovacuum brazing in repair of copper panels of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Structure and properties of bimetals dried by friction with mixing
von: G. M. Grigorenko, et al.
Veröffentlicht: (2018)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
von: Uematsu, Y., et al.
Veröffentlicht: (2008)

Physical modeling of the process of compression of continuously cast slabs and blooms during their crystallization
von: O. M. Smirnov, et al.
Veröffentlicht: (2017)

Method for measuring heat and mass Transfer processes formation in the mold cast billets caster, cast with electromagnetic stirring metal in the crystallizer
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2014)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Quality of low-carbon rod produced from billets and bloom continuous castings
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Prospects for improving the quality of railway wheels made of a continuous casted billet
von: A. I. Babachenko, et al.
Veröffentlicht: (2013)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Hybrid technology combining electron beam welding and friction stir welding in the processes of repair of aircraft structure elements of magnesium alloys
von: A. L. Majstrenko, et al.
Veröffentlicht: (2016)

Peculiarities of production of slab-type cast billets of VT1-0 and GRADE 2 types of low-grade spongy titanium
von: A. N. Kalinjuk, et al.
Veröffentlicht: (2018)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
von: D. A. Djudkin
Veröffentlicht: (2011)

Electroslag casting of billets of high-pressure stop valve bodies
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2009)

Friction stir welding in aerospace industry (Review)
von: E. V. Sergeeva
Veröffentlicht: (2013)

Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys
von: Wang, H.F., et al.
Veröffentlicht: (2017)

Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: O. M. Khoroshylov, et al.
Veröffentlicht: (2019)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: Khoroshylov, O.M., et al.
Veröffentlicht: (2019)