Features of structure and properties of bimetal joints of dissimilar metals produced by friction stir welding process

Features of structure and properties of bimetal joints of dissimilar metals produced by friction stir welding process

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	G. M. Grigorenko, L. I. Adeeva, Ju. Tunik, S. N. Stepanjuk, M. A. Polishchuk, E. V. Zelenin
Format:	Artikel
Sprache:	English
Veröffentlicht:	2013
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000473886
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Structure and properties of bimetals dried by friction with mixing
von: G. M. Grigorenko, et al.
Veröffentlicht: (2018)

Application of friction stir method for joining of magnesium alloys and their structure modifying
von: G. M. Grigorenko, et al.
Veröffentlicht: (2016)

Some advantages of welded joints of aluminum 1201 alloy produced by friction stir welding
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2021)

Characteristics of structural strength of D16T alloy welded joints, produced by friction stir welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2018)

Peculiarities of structure of welded joints of various-solubility metals
von: G. M. Grigorenko, et al.
Veröffentlicht: (2014)

Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
von: Uematsu, Y., et al.
Veröffentlicht: (2008)

Strength and structure of aluminium alloy welded joints produced by friction stir welding and non-consumable electrode welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2009)

Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
von: Bang, Han Sur, et al.
Veröffentlicht: (2018)

Effect of structure on properties of aluminium-lithium alloy welded joints produced by argonarc and friction stir welding methods
von: L. I. Markashova, et al.
Veröffentlicht: (2016)

Producing of coaxial joints of dissimilar metals with the help of explosion
von: A. G. Bryzgalin, et al.
Veröffentlicht: (2024)

Mechanical Properties of Friction Stir-Welded Joints of Aluminum Alloys
von: Chen, W.J., et al.
Veröffentlicht: (2015)

Strength and structure of butt, overlap and fillet joints of AMg6M alloy produced by friction stir welding
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2023)

Properties of butt joints of fine-sheet aluminum-lithium 1460 alloy, produced by friction stir and TIG welding
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2021)

Pequliarities of formation of joints of dissimilar high-temperature nickel-base alloys in friction welding
von: I. V. Ziakhor, et al.
Veröffentlicht: (2020)

Strength of welded joints of heat-hardenable aluminium alloys in tig and friction stir welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2019)

Physico-mechanical properties of thin-sheet aluminum alloy D16 butt joints produced by friction stir welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2017)

Peculiarities of producing Al-Ti bimetal sheet joints by the method of vacuum diffusion welding
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2020)

Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel
von: Bang, HanSur, et al.
Veröffentlicht: (2016)

Modeling of heat processes for improvement of structure of metals and alloys in friction stir welding
von: A. L. Majstrenko, et al.
Veröffentlicht: (2015)

Friction stir welding in aerospace industry (Review)
von: E. V. Sergeeva
Veröffentlicht: (2013)

Peculiarities and advantages of friction stir welding of butt joints of thin-sheet aluminium-lithium alloys
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2016)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)

Producing of bimetal semi-products by laser welding with a full penetration weld
von: M. Shmidt, et al.
Veröffentlicht: (2014)

Recent advances in the quantitative understanding of friction stir welding
von: A. De, et al.
Veröffentlicht: (2013)

Recent advances in the quantitative understanding of friction stir welding
von: De, A., et al.
Veröffentlicht: (2013)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys
von: Wang, H.F., et al.
Veröffentlicht: (2017)

Experimental Study on the Heterogeneity of Mechanical Properties of Friction Stir Welded Joints with the Digital Image Correlation Method
von: Li, H., et al.
Veröffentlicht: (2015)

Influence of stress-strain state on the structure and properties of joints in diffusion welding of dissimilar metals
von: V. V. Kvasnitskij, et al.
Veröffentlicht: (2014)

Investigation of temperature state of copper plate in the weld zone at friction STIR welding
von: M. A. Polieshchuk, et al.
Veröffentlicht: (2021)

Friction stir welding of aluminium alloys of different systems of alloying
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2010)

The resistance to stress corrosion cracking of the AMg5M alloy joints received by TIG and friction stir welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2015)

Prediction of parameters of friction stir welding of sheet aluminium alloys
von: A. G. Pokljatskij
Veröffentlicht: (2019)

Friction stir welding of composite, granulated and quasicrystalline aluminium alloys
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2011)

Restoration repair of slab copper moulds of MCCB. Structure and properties of metal in the joint zone
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Producing dissimilar joints of molybdenum–stainless steel using vacuum brazing
von: S. V. Maksimova, et al.
Veröffentlicht: (2017)

Friction stir welding is an effective method of improvement of service characteristics of structures
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2010)

Some advantages of butt joints of sheet deformable aluminium alloys AMg5M and AMg6M alloys, produced by friction stir welding, compared to TIG
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2015)

Determination of parameters of friction stir welding mode of aluminum-based alloy
von: I. O. Vakulenko, et al.
Veröffentlicht: (2018)