Features of thermal and vyazkouprugoo behavior formed in situ filled with mixtures of linear polyurethane and polystyrene
Збережено в:
| Дата: | 2013 |
|---|---|
| Автори: | L. F. Kosjanchuk, N. V. Jarovaja, N. V. Babkina |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2013
|
| Назва видання: | Polymer journal |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000513241 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Interfacial region in the filled polymer blends of linear polyurethans with poly(methyl methacrylate) formed in situ
за авторством: T. D. Ignatova, та інші
Опубліковано: (2012)
за авторством: T. D. Ignatova, та інші
Опубліковано: (2012)
Rheokinetics of in situ formation of aerosil filled poly(methyl methacrylate)–polyurethane blend
за авторством: V. F. Shumskij, та інші
Опубліковано: (2014)
за авторством: V. F. Shumskij, та інші
Опубліковано: (2014)
Features of in situ formation of mixtures of linear polymers
за авторством: T. D. Ihnatova, та інші
Опубліковано: (2021)
за авторством: T. D. Ihnatova, та інші
Опубліковано: (2021)
EFFECT OF FILLING A POLYURETHANE MATRIX WITH KAOLIN ON DAMPING EFFICIENCY, MECHANICAL AND THERMAL PROPERTIES.
за авторством: Babkina, Nataliia, та інші
Опубліковано: (2023)
за авторством: Babkina, Nataliia, та інші
Опубліковано: (2023)
Effect of the chemical nature of the components to process of formation in situ of binary mixtures of linear imcompatibility polymers
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011)
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011)
Epoxy polyurethane nanocomposites filled with fullerite
за авторством: R. A. Rozhnova, та інші
Опубліковано: (2015)
за авторством: R. A. Rozhnova, та інші
Опубліковано: (2015)
The complexation in cross-linked polyurethanes with introduced in situ copper acetylacetonate
за авторством: Z. O. Haholkina, та інші
Опубліковано: (2014)
за авторством: Z. O. Haholkina, та інші
Опубліковано: (2014)
Molding processes using thermal treatment polystyrene
за авторством: O. A. Tikhonova, та інші
Опубліковано: (2014)
за авторством: O. A. Tikhonova, та інші
Опубліковано: (2014)
Epoxy polyurethane composites filled with polyhydroxybutyrate and doxorubicin for the manufacture of bone implants
за авторством: S. A. Lukashevych, та інші
Опубліковано: (2015)
за авторством: S. A. Lukashevych, та інші
Опубліковано: (2015)
The viscoelastic properties of the poly(methyl methacrylate) modified by polyurethane with different molecular weight of oligoester block
за авторством: N. V. Babkina, та інші
Опубліковано: (2017)
за авторством: N. V. Babkina, та інші
Опубліковано: (2017)
Properties of binary mixtures based on thermoplastic polyurethanes and polyolefins
за авторством: V. M. Anisimov
Опубліковано: (2012)
за авторством: V. M. Anisimov
Опубліковано: (2012)
Properties of thermoplastic polyurethanes based on mixtures of complex polyesters
за авторством: V. M. Anisimov
Опубліковано: (2012)
за авторством: V. M. Anisimov
Опубліковано: (2012)
The influence of the phenalenone dyes on the polyurethanes formation
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
Mechanical and thermophysical properties of fumarate-containing epoxy-polyurethane composite materials filled by ferrocene
за авторством: T. V. Rudenchyk, та інші
Опубліковано: (2013)
за авторством: T. V. Rudenchyk, та інші
Опубліковано: (2013)
Polyurethanes synthesized on the basis of di- and polyisocyanate filled with doxorubicin: a study of the structure and properties
за авторством: S. A. Lukashevych, та інші
Опубліковано: (2019)
за авторством: S. A. Lukashevych, та інші
Опубліковано: (2019)
Active media based on polyurethane doped with a binary dye mixture
за авторством: S. V. Nikolaiev, та інші
Опубліковано: (2021)
за авторством: S. V. Nikolaiev, та інші
Опубліковано: (2021)
Study the influence of model biological medium on structure and properties of epoxy-polyurethane composite materials, filled by ferrocene
за авторством: T. V. Rudenchyk, та інші
Опубліковано: (2014)
за авторством: T. V. Rudenchyk, та інші
Опубліковано: (2014)
Effect of surface nature of nanofiller on the in situ formation and morphology of a poly(methyl methacrylate)/polyurethane blend
за авторством: V. P. Shumskyi, та інші
Опубліковано: (2019)
за авторством: V. P. Shumskyi, та інші
Опубліковано: (2019)
Flatwise Compression Strength and Energy Absorption of Polyurethane Foam-Filled Lattice Core Sandwich Panels
за авторством: Rostamiyan, Y., та інші
Опубліковано: (2016)
за авторством: Rostamiyan, Y., та інші
Опубліковано: (2016)
Crosslinking agents for polystyrene matrix
за авторством: P. N. Zhmurin, та інші
Опубліковано: (2015)
за авторством: P. N. Zhmurin, та інші
Опубліковано: (2015)
Low-temperature features of micromechanical properties of polystyrene
за авторством: A. V. Rusakova, та інші
Опубліковано: (2019)
за авторством: A. V. Rusakova, та інші
Опубліковано: (2019)
Manufacture and study of new polystyrene scintillators
за авторством: Senchishin, V.G., та інші
Опубліковано: (2000)
за авторством: Senchishin, V.G., та інші
Опубліковано: (2000)
Influence of diisocyanate component on dynamic characteristics of polyurethanes with phenalenone dyes
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
The thermodynamics of interactions and relaxation properties of the poss-containing nanocomposites based on polyurethane-poly(hydroxypropyl methacrylate) matrix, which is formed by the principle of IPNs
за авторством: L. V. Karabanova, та інші
Опубліковано: (2021)
за авторством: L. V. Karabanova, та інші
Опубліковано: (2021)
About the interaction of 6-aminophenolenone with polyurethane matrix
за авторством: M. S. Stratilat, та інші
Опубліковано: (2014)
за авторством: M. S. Stratilat, та інші
Опубліковано: (2014)
Damping efficiency of two-layer polyurethane composites
за авторством: N. V. Babkina, та інші
Опубліковано: (2021)
за авторством: N. V. Babkina, та інші
Опубліковано: (2021)
Efficiency improvement of polystyrene-based plastic scintillators
за авторством: Adadurov, A.F., та інші
Опубліковано: (2009)
за авторством: Adadurov, A.F., та інші
Опубліковано: (2009)
The structure of starch-containing ionomeric polyurethanes
за авторством: Ju. V. Savelev, та інші
Опубліковано: (2011)
за авторством: Ju. V. Savelev, та інші
Опубліковано: (2011)
Water dispersing ionic polyurethanes with crown – ether fragments in the chain
за авторством: T. V. Travinskaja, та інші
Опубліковано: (2012)
за авторством: T. V. Travinskaja, та інші
Опубліковано: (2012)
Effect of chemical elements of solid mass of mixtures at filling technogeneous cavities in the earth crust
за авторством: A. M. Kuzmenko, та інші
Опубліковано: (2018)
за авторством: A. M. Kuzmenko, та інші
Опубліковано: (2018)
The Process of Expanded Polystyrene Products Formaion
за авторством: Ya. H. Dvoinos, та інші
Опубліковано: (2014)
за авторством: Ya. H. Dvoinos, та інші
Опубліковано: (2014)
Peculiarities of polyvinylchloride modifying with polystyrene plastics
за авторством: Ye. Levytskyi, та інші
Опубліковано: (2015)
за авторством: Ye. Levytskyi, та інші
Опубліковано: (2015)
Thermal transformation of polydimethylsiloxane filled with initial and zirconia containing silicas
за авторством: Ja. Sulim, та інші
Опубліковано: (2014)
за авторством: Ja. Sulim, та інші
Опубліковано: (2014)
Simulation of the Percolation Behavior of the Properties of Polymer Nanocomposites Filled with Carbon Nanotubes
за авторством: Лисенков, Едуард, та інші
Опубліковано: (2022)
за авторством: Лисенков, Едуард, та інші
Опубліковано: (2022)
Simulation of the Percolation Behavior of the Properties of Polymer Nanocomposites Filled with Carbon Nanotubes
за авторством: E. A. Lysenkov, та інші
Опубліковано: (2022)
за авторством: E. A. Lysenkov, та інші
Опубліковано: (2022)
The influence of the phenalenone dyes on the kinetics of the polyurethanes formation with different nature of the diisocyanate unit
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
за авторством: L. F. Kosjanchuk, та інші
Опубліковано: (2015)
Polyurethane foams based on natural polysaccharides: thermal mass-spectrometry
за авторством: I. V. Janovich, та інші
Опубліковано: (2012)
за авторством: I. V. Janovich, та інші
Опубліковано: (2012)
Thermostability and thermal decomposition kinetics polyurethane – calcium sulphate system
за авторством: V. V. Davydenko
Опубліковано: (2013)
за авторством: V. V. Davydenko
Опубліковано: (2013)
Synthesis, morphology and thermal properties of the POSS-containing polyurethane nanocomposites
за авторством: L. V. Karabanova, та інші
Опубліковано: (2016)
за авторством: L. V. Karabanova, та інші
Опубліковано: (2016)
Thermal characteristics and phase structure of thermostable polyimide/polyurethane film materials
за авторством: O. P. Grigoreva, та інші
Опубліковано: (2015)
за авторством: O. P. Grigoreva, та інші
Опубліковано: (2015)
Схожі ресурси
-
Interfacial region in the filled polymer blends of linear polyurethans with poly(methyl methacrylate) formed in situ
за авторством: T. D. Ignatova, та інші
Опубліковано: (2012) -
Rheokinetics of in situ formation of aerosil filled poly(methyl methacrylate)–polyurethane blend
за авторством: V. F. Shumskij, та інші
Опубліковано: (2014) -
Features of in situ formation of mixtures of linear polymers
за авторством: T. D. Ihnatova, та інші
Опубліковано: (2021) -
EFFECT OF FILLING A POLYURETHANE MATRIX WITH KAOLIN ON DAMPING EFFICIENCY, MECHANICAL AND THERMAL PROPERTIES.
за авторством: Babkina, Nataliia, та інші
Опубліковано: (2023) -
Effect of the chemical nature of the components to process of formation in situ of binary mixtures of linear imcompatibility polymers
за авторством: T. D. Ignatova, та інші
Опубліковано: (2011)