Buchumschlag

Friction and Wear of Aluminum Alloy Reinforced by Ti02 Particles

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	Z. Sarajan
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Strength of Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000577332
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Friction and Wear of Aluminum Alloy Reinforced by Ti0₂ Particles
von: Sarajan, Z.
Veröffentlicht: (2013)

The investigation of friction and wear characteristics of ion-plasma coatings, received on the aluminum alloy
von: C. F. Dudnik, et al.
Veröffentlicht: (2004)

Microstructure properties of particles reinforced polytetrafluoroethylene composite bearings after wear
von: Ünlü, B.S., et al.
Veröffentlicht: (2015)

Microstructure properties of particles reinforced polytetrafluoroethylene composite bearings after wear
von: B. S. Ьnlь, et al.
Veröffentlicht: (2015)

Education of sludge particles and wear particles polishing powder in the polishing process nitride aluminum
von: Ju. D. Filatov, et al.
Veröffentlicht: (2017)

Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy
von: Ji, S.D., et al.
Veröffentlicht: (2016)

Effect of reinforcement by the discrete particles on a set of properties of the aluminum based materials
von: V. A. Shcheretskij, et al.
Veröffentlicht: (2013)

Effect of Nano-TiO₂ Particles on Wear and Corrosion Behaviour of AA6063 Surface Composite Fabricated by Friction Stir Processing
von: Muthukrishnan, D., et al.
Veröffentlicht: (2018)

The present state of production of aluminum alloys reinforced by non-metallic fillers
von: B. M. Nemenenok, et al.
Veröffentlicht: (2017)

Determination of parameters of friction stir welding mode of aluminum-based alloy
von: I. O. Vakulenko, et al.
Veröffentlicht: (2018)

The effect of friction stir welding on corrosion resistance of high strength aluminum alloys
von: I. O. Hnatenko, et al.
Veröffentlicht: (2019)

Structure and mechanical properties of Al-Fe-Cr alloys for elevated temperatures, reinforced by nanoquasicrystalline particles additionally alloyed by Ti, Mo and Nb
von: Ju. V. Milman, et al.
Veröffentlicht: (2014)

Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading
von: Cao, D.F., et al.
Veröffentlicht: (2015)

Modification of aluminum and titanium alloys surface for increasing their wear resistance and tribological characteristics
von: M. M. Student, et al.
Veröffentlicht: (2021)

Some advantages of welded joints of aluminum 1201 alloy produced by friction stir welding
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2021)

Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
von: Uematsu, Y., et al.
Veröffentlicht: (2008)

Modern Polymer Composites for Friction and Wear Applications
von: K. Friedrich, et al.
Veröffentlicht: (2012)

The influence of hydrogen on friction and wear of metals (Review)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2012)

Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
von: Zhang, K., et al.
Veröffentlicht: (2018)

Microstructure of aluminum-silicon alloy ak5m reinforced by zirconium which was entered in alloy out of zirconium fluoride
von: D. V. Ivanchenko
Veröffentlicht: (2017)

Dominance of multicomponents and multiayer coverages on friction processes and wear
von: V. M. Beresnev
Veröffentlicht: (2004)

Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
von: Wei, Y.H., et al.
Veröffentlicht: (2019)

The effect of aluminum content on texture parameters of Ti–Al alloy sheets
von: N. A. Volchok, et al.
Veröffentlicht: (2012)

Effect of concentration of hard particles on gas-abrasive wear resistance of composite alloys
von: A. P. Voronchuk
Veröffentlicht: (2009)

Features of temperature-dependent internal friction at phase decomposition of Nb-Ti alloy
von: Arzhavitin, V.M.
Veröffentlicht: (2008)

Properties of butt joints of fine-sheet aluminum-lithium 1460 alloy, produced by friction stir and TIG welding
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2021)

Influence of molibdenium under the hightemperature friction of titatium materials on wear
von: A. M. Petrova, et al.
Veröffentlicht: (2011)

Influence of molibdenium under the hightemperature friction of titatium materials on wear
von: Petrova, А.М., et al.
Veröffentlicht: (2011)

Kinetics of wear of steels with diffusion coatings under rolling friction
von: P. V. Kaplun, et al.
Veröffentlicht: (2020)

Local friction wear of elastic half-space with a protrusion
von: O. P. Kozachok
Veröffentlicht: (2021)

The antifriction composite material with a matrix of nonmixing components, reinforced by particles of iron-carbon-alloys
von: A. S. Zatulovskij, et al.
Veröffentlicht: (2017)

Wearing features of oil scrapper piston rings with tin coating under bench tests for friction and wear
von: T. S. Skoblo, et al.
Veröffentlicht: (2017)

On the mechanism of formation of the granular structure and interfaces in self-reinforced aluminum nitride
von: H. S. Olieinyk, et al.
Veröffentlicht: (2021)

Rational casting technologies of the economically reinforced matrix-aluminum composite preforms
von: A. S. Zatulovskij, et al.
Veröffentlicht: (2015)

Physico-mechanical properties of thin-sheet aluminum alloy D16 butt joints produced by friction stir welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2017)

Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014)

Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: Velizade, Evren S.
Veröffentlicht: (2020)

Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: Velizade, Evren S.
Veröffentlicht: (2020)

Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: E. S. Velizade
Veröffentlicht: (2020)

Regularities of wear of metal polymer friction couples under influence of tribocurrents
von: S. I. Kryshtopa, et al.
Veröffentlicht: (2019)