Methods of calculation of strength of polyethylene pipes with a cellular wall (A review)
Gespeichert in:
| Datum: | 2013 |
|---|---|
| Hauptverfasser: | M. H. Stashchuk, M. I. Dorosh |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2013
|
| Schriftenreihe: | Materials Science (Physicochemical mechanics of materials) |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000660749 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Calculation of large polyethylene pipes with a hollow wall
von: M. H. Stashchuk, et al.
Veröffentlicht: (2012)
von: M. H. Stashchuk, et al.
Veröffentlicht: (2012)
Calculation of the deformed state of cellular pipes in inhomogeneous soil
von: M. H. Stashchuk, et al.
Veröffentlicht: (2010)
von: M. H. Stashchuk, et al.
Veröffentlicht: (2010)
Features of technology and modern trends in the field of butt welding of polyethylene pipes (Review)
von: M. V. Yurzhenko
Veröffentlicht: (2019)
von: M. V. Yurzhenko
Veröffentlicht: (2019)
Application of heat monitoring in welding polyethylene pipes
von: Ju. Glukhovskij, et al.
Veröffentlicht: (2010)
von: Ju. Glukhovskij, et al.
Veröffentlicht: (2010)
Calculation of parameters for hydraulic conveying by polyethylene pipes of par-ticles with substantially nonuniform density and size
von: E. V. Semenenko, et al.
Veröffentlicht: (2013)
von: E. V. Semenenko, et al.
Veröffentlicht: (2013)
Calculation of operating modes for hydrotransport complexes with main pipelines consisting of polyethylene and steel pipe sections
von: E. V. Semenenko, et al.
Veröffentlicht: (2013)
von: E. V. Semenenko, et al.
Veröffentlicht: (2013)
Design calculation of the pipeline systems for hydromechanization technologies when steel pipes are replaced by the polyethylene ones
von: E. V. Semenenko, et al.
Veröffentlicht: (2015)
von: E. V. Semenenko, et al.
Veröffentlicht: (2015)
Modeling of temperature fields and stresses in polyethylene pipes in welding with a hot tool
von: N. P. Nesterenko, et al.
Veröffentlicht: (2009)
von: N. P. Nesterenko, et al.
Veröffentlicht: (2009)
Calculation of potential energy and geometric parameters of a dislocation crack
von: M. H. Stashchuk, et al.
Veröffentlicht: (2015)
von: M. H. Stashchuk, et al.
Veröffentlicht: (2015)
Flash-butt welding of thick-walled pipes of highstrength steels of K-56 strength class
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2012)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2012)
Development of technology of combined joining of position butts of thick-walled pipes of high-strength steels
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2015)
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2015)
Producing permanent joints of pipes from structured polyethylene
von: N. G. Korab, et al.
Veröffentlicht: (2009)
von: N. G. Korab, et al.
Veröffentlicht: (2009)
X-ray TV inspection of the quality of welding polyethylene pipes
von: M. M. Karmanov, et al.
Veröffentlicht: (2021)
von: M. M. Karmanov, et al.
Veröffentlicht: (2021)
Joint formation in magnetically-impelled arc butt welding of thick-walled pipes from high-strength steels
von: V. S. Kachinskij, et al.
Veröffentlicht: (2017)
von: V. S. Kachinskij, et al.
Veröffentlicht: (2017)
The study of magnetic field of power cables in polyethylene pipes with magnetic properties
von: A. A. Shcherba, et al.
Veröffentlicht: (2020)
von: A. A. Shcherba, et al.
Veröffentlicht: (2020)
The quality and operational characteristics of welded joints of pipes from different types of polyethylene
von: M. O. Kovalchuk, et al.
Veröffentlicht: (2020)
von: M. O. Kovalchuk, et al.
Veröffentlicht: (2020)
Methods for mitigation of magnetic field generated by underground power cables in polyethylene pipes made of composite magnetic material
von: I. M. Kucheriava
Veröffentlicht: (2022)
von: I. M. Kucheriava
Veröffentlicht: (2022)
Method to calculate the parameters of integral cellular communication networks with isolated partition of channels
von: A. Z. Melikov, et al.
Veröffentlicht: (2014)
von: A. Z. Melikov, et al.
Veröffentlicht: (2014)
Mechanisms of structural transformations in polyethylene nanocomposites with multi-walled carbon nanotubes
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)
Mechanisms of structural transformations in polyethylene nanocomposites with multi-walled carbon nanotubes
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)
von: L. A. Bulavin, et al.
Veröffentlicht: (2021)
Evaluation of strength and fatigue life of tubular structures
von: M. H. Stashchuk, et al.
Veröffentlicht: (2016)
von: M. H. Stashchuk, et al.
Veröffentlicht: (2016)
ropagation of a surface crack in the wall of an oil pipe, allowing for its hydrogenation
von: D. V. Rudavskyi
Veröffentlicht: (2012)
von: D. V. Rudavskyi
Veröffentlicht: (2012)
Modeling a circumferential crack in pipe area of a flat bottom of thick-walled pressure vessel
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
Diagnostics of hydrogen macrodelamination in the wall of pipe elbow of a natural gas transmission pipeline
von: Ye. Kharchenko, et al.
Veröffentlicht: (2015)
von: Ye. Kharchenko, et al.
Veröffentlicht: (2015)
The method of calculating parameters of a wall water radiant panel heating system
von: E. A. Bekirov, et al.
Veröffentlicht: (2014)
von: E. A. Bekirov, et al.
Veröffentlicht: (2014)
Experimental study regarding the influence of welding parameters on the mechanical behavior of high density polyethylene pipes
von: I. Ramadan, et al.
Veröffentlicht: (2021)
von: I. Ramadan, et al.
Veröffentlicht: (2021)
Calculation of static strength resistance to brittle fracture and cyclic crack resistance of steel pipe NPP not im-portant to safety
von: T. I. Matchenko, et al.
Veröffentlicht: (2015)
von: T. I. Matchenko, et al.
Veröffentlicht: (2015)
Physical concept and calculation of boiling point in a pulsating heat pipe
von: A. N. Naumova, et al.
Veröffentlicht: (2014)
von: A. N. Naumova, et al.
Veröffentlicht: (2014)
Influence of hydrogen-methane gas mixtures on the physical and chemical structure of polyethylene pipes of the operating gasdistribution networks of Ukraine
von: M. V. Yurzhenko, et al.
Veröffentlicht: (2023)
von: M. V. Yurzhenko, et al.
Veröffentlicht: (2023)
Polysaccharides of macroalgal cell walls: structure and features (a review)
von: V. M. Mokrosnop, et al.
Veröffentlicht: (2020)
von: V. M. Mokrosnop, et al.
Veröffentlicht: (2020)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
The influence of hydrogen sulphide concentration on corrosion and hydrogenation of pipe steels (A review)
von: M. S. Khoma, et al.
Veröffentlicht: (2021)
von: M. S. Khoma, et al.
Veröffentlicht: (2021)
Crack initiation on inner surface of piping at high temperatures. Information 1. Thermal load on pipe walls at starting and in service
von: S. A. Nedoseka, et al.
Veröffentlicht: (2015)
von: S. A. Nedoseka, et al.
Veröffentlicht: (2015)
Increase of strength characteristics of spirally- welded pipes for construction purposes
von: A. S. Pismennyj, et al.
Veröffentlicht: (2012)
von: A. S. Pismennyj, et al.
Veröffentlicht: (2012)
Evaluation of the admissible sizes of faulty fusions of thin-walled cell elements
von: M. H. Stashchuk
Veröffentlicht: (2014)
von: M. H. Stashchuk
Veröffentlicht: (2014)
Potential means for mitigation of magnetic field generated by underground power cables in polyethylene pipes made of composite magnetic material
von: I. M. Kucheriava
Veröffentlicht: (2023)
von: I. M. Kucheriava
Veröffentlicht: (2023)
Modeling the motion of domain walls in ferromagnetic materials (A review)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2015)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2015)
First Main Problem of the Theory of Elasticity for a Layer with Two Thick-Walled Pipes and One Cylindrical Cavity
von: Деньщиков, О. Ю.
Veröffentlicht: (2026)
von: Деньщиков, О. Ю.
Veröffentlicht: (2026)
First Main Problem of the Theory of Elasticity for a Layer with Two Thick-Walled Pipes and One Cylindrical Cavity
von: Деньщиков, О. Ю.
Veröffentlicht: (2026)
von: Деньщиков, О. Ю.
Veröffentlicht: (2026)
An ultrafast cellular method of matrix multiplication
von: L. D. Elfimova
Veröffentlicht: (2018)
von: L. D. Elfimova
Veröffentlicht: (2018)
Ähnliche Einträge
-
Calculation of large polyethylene pipes with a hollow wall
von: M. H. Stashchuk, et al.
Veröffentlicht: (2012) -
Calculation of the deformed state of cellular pipes in inhomogeneous soil
von: M. H. Stashchuk, et al.
Veröffentlicht: (2010) -
Features of technology and modern trends in the field of butt welding of polyethylene pipes (Review)
von: M. V. Yurzhenko
Veröffentlicht: (2019) -
Application of heat monitoring in welding polyethylene pipes
von: Ju. Glukhovskij, et al.
Veröffentlicht: (2010) -
Calculation of parameters for hydraulic conveying by polyethylene pipes of par-ticles with substantially nonuniform density and size
von: E. V. Semenenko, et al.
Veröffentlicht: (2013)