Зображення обкладинки

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition)

Збережено в:

Бібліографічні деталі
Дата:	2013
Автор:	V. I. Lavrinenko
Формат:	Стаття
Мова:	Англійська
Опубліковано:	2013
Назва видання:	Superhard Materials
Онлайн доступ:	http://jnas.nbuv.gov.ua/article/UJRN-0000695843
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Репозитарії

Library portal of National Academy of Sciences of Ukraine | LibNAS

Схожі ресурси

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component)
за авторством: V. I. Lavrinenko
Опубліковано: (2012)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2022)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2021)

Increase of medium-carbon steel wear resistance by nanodispersion of surface layer
за авторством: V. I. Kyryliv
Опубліковано: (2012)

Wear-resistant arc surfacing over a layer of alloying charge
за авторством: V. V. Peremitko
Опубліковано: (2014)

Strengthening technologies for the formation of wear-resistant surface layers
за авторством: V. V. Tikhonenko, та інші
Опубліковано: (2011)

Increase of wear resistance of titanium using argon arc surfacing
за авторством: V. P. Prilutskij, та інші
Опубліковано: (2012)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
за авторством: T. P.G. Nguen
Опубліковано: (2016)

Increase of brittle fracture resistance of metal of heat-affected zone in railway wheel surfacing
за авторством: A. A. Gajvoronskij, та інші
Опубліковано: (2017)

Structure and wear resistance of retailoring wheel flange
за авторством: S. A. Bespalov
Опубліковано: (2009)

Modification of aluminum and titanium alloys surface for increasing their wear resistance and tribological characteristics
за авторством: M. M. Student, та інші
Опубліковано: (2021)

Problems and prospects of surfacing copper and copper parts by wear-resistant layers (Review)
за авторством: A. A. Babinets, та інші
Опубліковано: (2020)

Contact surface resistivity as a favorable condition of commutation process
за авторством: V. T. Chemerys
Опубліковано: (2017)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
за авторством: V. I. Lavrinenko
Опубліковано: (2020)

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness
за авторством: O. O. Pasichnyi, та інші
Опубліковано: (2019)

Investigation of the processes of wear-resistant surface alloying
за авторством: A. G. Kovalchuk, та інші
Опубліковано: (2017)

Effect of Active Chemical Elements of Lubricating Fluids on Forming and Characteristics of Wear-Resistant Superdispersed and Nanostructured Surface Friction Layers of Steels
за авторством: V. V. Tikhonovich
Опубліковано: (2015)

The role of copper on the formation of surface friction wear resistant layers of high chrome cast iron
за авторством: V. V. Tykhonovych, та інші
Опубліковано: (2014)

Wear-resistant surfacing with feeding of nanooxides to weld pool
за авторством: V. D. Kuznetsov
Опубліковано: (2015)

Residual lifetime of a railway wheel axle with a surface transverse crack
за авторством: V. R. Skalskyi, та інші
Опубліковано: (2016)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Physical-chemical processes in castings with wear-resistant surface alloying
за авторством: A. G. Kovalchuk, та інші
Опубліковано: (2018)

Formation of wear resistant structures in steels at discrete changes of their surfaces
за авторством: M. V. Kindrachuk, та інші
Опубліковано: (2009)

Selection of wear-resistant materials for electroslag surfacing of mining equipment parts in a current-conducting mould
за авторством: Yu. M. Lankin, та інші
Опубліковано: (2022)

Effect of high-frequency mechanical vibrations of workpiece on structure and wear resistance of deposited metal Kh10R4G2S
за авторством: G. V. Pokhmurskaja, та інші
Опубліковано: (2016)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

The peculiarities in contact interaction and wear of thinwalled elements of construction
за авторством: O. V. Maksymuk
Опубліковано: (2020)

Increase in wear resistance and stability of a rail track of small-diameter curvilinear sections
за авторством: V. V. Govorukha, та інші
Опубліковано: (2018)

Conductance of a STM contact on the surface of a thin film
за авторством: Khotkevych, N.V., та інші
Опубліковано: (2012)

Flux-cored wire for wear-resistant surfacing of thin-sheet structures
за авторством: A. A. Babinets, та інші
Опубліковано: (2017)

Computational studies of electromagnetic field propagation and deforming of structural elements for a thin-walled curved workpiece and an inductor
за авторством: Lavinsky, D. V., та інші
Опубліковано: (2024)

Modeling of wear-resistance of epoxy composites by mechanical properties variation
за авторством: D. P. Stukhliak, та інші
Опубліковано: (2018)

The effect of titanium and tungsten coating the surface of diamond monocrystals on the wear resistance of rock-cutting elements made from them
за авторством: O. O. Bochechka, та інші
Опубліковано: (2019)

Influence of laser alloying modes to the wear resistance parameters of 12H18N10T steel surface layer
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2013)

Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
за авторством: N. B. Efros, та інші
Опубліковано: (2014)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of superabrasive composites
за авторством: V. I. Lavrinenko
Опубліковано: (2019)

Adhesional Contact of Bodies with a Curved Rough Surface
за авторством: I. K. Valieieva
Опубліковано: (2021)

Creation of chromium carbide steel with increased wear-resistance
за авторством: O. M. Shevchenko, та інші
Опубліковано: (2012)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
за авторством: S. V. Sokhan, та інші
Опубліковано: (2020)

Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
за авторством: I. O. Riabtsev, та інші
Опубліковано: (2021)