Cover Image

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite

Saved in:

Bibliographic Details
Date:	2013
Main Author:	N. E. Stakhniv
Format:	Article
Language:	English
Published:	2013
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000695853
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
by: N. E. Stakhniv, et al.
Published: (2016)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
by: N. E. Stakhniv
Published: (2017)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
by: L. N. Devin, et al.
Published: (2012)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
by: N. E. Stakhniv, et al.
Published: (2012)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
by: L. N. Devin, et al.
Published: (2018)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
by: S. A. Klimenko, et al.
Published: (2015)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
by: L. N. Devin, et al.
Published: (2018)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: Zhao, T., et al.
Published: (2017)

An increase of operating characteristics of cBN cutters by improving their damping properties
by: L. N. Devin, et al.
Published: (2012)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
by: S. A. Klimenko, et al.
Published: (2012)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
by: L. N. Devin, et al.
Published: (2019)

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters
by: M. Enek, et al.
Published: (2014)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
by: N. E. Stakhniv, et al.
Published: (2019)

Cutting section parametrs for oblique fine turning with a radius tool
by: L. M. Devin, et al.
Published: (2019)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
by: L. V. Sudnik, et al.
Published: (2017)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

Sintering of cBN based materials with TaC binder for cutting tool application
by: K. V. Slipchenko, et al.
Published: (2020)

Effect of damping properties of cutters on the probability of failure of the CBN plates
by: L. M. Devin, et al.
Published: (2016)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

Experimental investigation and finite modeling of the process of intermittent cutting of AISI 52100 steel with PcBN tool
by: Li Xin, et al.
Published: (2023)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
by: K. O. Diadiura, et al.
Published: (2015)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
by: L. M. Devin, et al.
Published: (2020)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
by: Романенко, Я.М., et al.
Published: (2015)

Демпфуючі властивості РСBN композитів систем cBN–Ti, cBN–Al–метал, в залежностівід технологічних умов одержання
by: Романенко, Я.М., et al.
Published: (2017)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
by: Ya. M. Romanenko, et al.
Published: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Термобаричне спікання композиту cBN–Cr₃C₂
by: Сліпченко, К.В., et al.
Published: (2017)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
by: H. P. An, et al.
Published: (2014)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
by: An, H.P., et al.
Published: (2014)

Твердые растворы в системах cBN-Al и cBN-Al-TiB₂, полученные при высоких давлениях и температурах
by: Беженар, Н.П., et al.
Published: (2011)

High-speed machining of martensitic stainless steel using PcBN
by: K. Sobiyi, et al.
Published: (2016)

High-speed machining of martensitic stainless steel using PcBN
by: Sobiyi, K., et al.
Published: (2016)

The correlation model of acoustic emission in fine diamond turning
by: L. N. Devin, et al.
Published: (2017)

cBN–Cu composite: production method and physical properties
by: M. V. Nikishina
Published: (2012)