Buchumschlag

The influence of diamond powder as a filler on properties of a copper–sapphire glued joint

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	V. P. Maslov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000695866
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of porosity of tool composite on efficiency of profile diamond grinding of sapphire and zirconium dioxide
von: Ye. O. Pashchenko, et al.
Veröffentlicht: (2020)

Effect of the crystallographic orientation on the sapphire surface roughness in diamond machining
von: A. V. Voloshin, et al.
Veröffentlicht: (2013)

A study of the influence of natural diamond ultrafine powders on the properties of metal matrix composites
von: M. N. Safonova, et al.
Veröffentlicht: (2018)

Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
von: E. M. Lutsak, et al.
Veröffentlicht: (2017)

Upper bound of oriented genus of a simple graph gluing
von: V. I. Petreniuk, et al.
Veröffentlicht: (2018)

Influence of filler from powders of ultrafine diamond of brand of ASM 1/0 and molybdenum in the copula of tubular drills on their capacity at treatment of some non-metal materials
von: Ju. V. Najdich, et al.
Veröffentlicht: (2017)

Influence of filler material on the structure and properties of welded joints of high-strength VT19 titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2022)

Thermal conductivity and electrical resistance of diamond polycrystals and diamond-copper, diamond-copper-titan composites
von: O. I. Cherniienko, et al.
Veröffentlicht: (2018)

The effect of a refrigerant on the efficiency of machining sapphire
von: A. V. Voloshin, et al.
Veröffentlicht: (2013)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
von: V. P. Afanasev, et al.
Veröffentlicht: (2016)

Impact fragmentation of sapphire
von: P. V. Konevskij, et al.
Veröffentlicht: (2015)

Formation of a joint between deposited and base metals during laser cladding of a nickelbased powder onto a copper-based alloy
von: F. Bourahima, et al.
Veröffentlicht: (2022)

Some ways of decreasing the losses of filler powder in microplasma surfacing
von: K. A. Jushchenko, et al.
Veröffentlicht: (2013)

A Note on Gluing Dirac Type Operators on a Mirror Quantum Two-Sphere
von: Klimek, S., et al.
Veröffentlicht: (2014)

A new upper boundary of the non-oriented type of gluing of simple graphs
von: B. I. Petreniuk, et al.
Veröffentlicht: (2019)

Structure and properties of dynamically compacted powder of sopper and mixture of copper-chromium
von: A. I. Tolochin, et al.
Veröffentlicht: (2016)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Mechanical properties of brazed joints of dispersion-strengthened copper alloy
von: S. V. Maksimova, et al.
Veröffentlicht: (2010)

Effect of powder filler metal surface on structure and properties of composite materials on the base of co-polymers of methacrylates with polyvinylpyrrolidone
von: O. V. Suberliak, et al.
Veröffentlicht: (2016)

Electrodeposited diamond coating with protection by diamond micron powder in a dressing tool. Part 2. Tool performance
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

A novel composite abrasive material of unmarketable natural diamond powder
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2014)

A new group averaging approach to diagnostics of technological properties of high-strength synthetic diamond powders
von: H. A. Petasiuk
Veröffentlicht: (2022)

Growth conditions influence on thermally stimulated luminescence of sapphire single crystals
von: Blonskyy, I.V., et al.
Veröffentlicht: (2002)

Filamentation of femtosecond vortex beam in sapphire
von: I. V. Blonskyi, et al.
Veröffentlicht: (2013)

Filamentation of femtosecond vortex beam in sapphire
von: I. V. Blonskyi, et al.
Veröffentlicht: (2013)

Diagnosis of performance characteristic of diamond powders
von: M. N. Safonova, et al.
Veröffentlicht: (2017)

Phase-structural state and technological properties synthesized powders sulphides of iron and copper
von: O. K. Radchenko, et al.
Veröffentlicht: (2012)

Influence of heat treatment in an argon and hydrogen on changes in the functional groups on the surface of nanosized diamond powder; morphology of diamond powder after deposition of titanium and tungsten on their surface
von: O. I. Cherniienko, et al.
Veröffentlicht: (2019)

Polymorphism in the sequence of Glu1 gene in populations of Thinopyrum intermedium as a possible adaptive trait
von: M. Z. Antoniuk, et al.
Veröffentlicht: (2018)

Formation of the electrophysical properties of the polycrystals during hpht sintering of conductive diamond powders
von: O. O. Bochechka, et al.
Veröffentlicht: (2016)

Study of influence of ultrafine powder of natural diamond on the microstructure of the matrix on the basis of tin bronze
von: M. N. Safonova, et al.
Veröffentlicht: (2016)

Brazing of ZrO2-ceramic to metal by silver—copper—oxygen filler on the air
von: A. V. Durov
Veröffentlicht: (2014)

Investigation of the influence of microdispersed fillers on physicomechanical and thermal properties of epoxy composites
von: A. V. Buketov, et al.
Veröffentlicht: (2015)

Analysis of Glu-1 loci in samples of rare wheat species and their hybrides
von: S. M. Sichkar, et al.
Veröffentlicht: (2018)

A study of applications of nanotexturized sapphire as a template for MOCVD-heteroepitaxy of III-nitrides
von: N. O. Sukhovii, et al.
Veröffentlicht: (2018)

A study of applications of nanotexturized sapphire as a template for MOCVD-heteroepitaxy of III-nitrides
von: Sukhovii, N. O., et al.
Veröffentlicht: (2018)

Luminescent and radiation characteristics of monocrystalline diamond powders
von: O. G. Lysenko, et al.
Veröffentlicht: (2019)

Optical and laser properties of Ti-sapphire grown by different methods in reducing medium
von: Kryvonosov, E.V., et al.
Veröffentlicht: (2012)

Microstructures and properties of Fe–Co–Cu pre-alloyed powder for geological diamond bits
von: D. Xie, et al.
Veröffentlicht: (2019)

Diamond electroplated coating with protection by diamond micron powder in a dressing tool. Part 1. Coating deposition conditions
von: M. N. Shejko, et al.
Veröffentlicht: (2017)