Buchumschlag

Selection of rational compositions of slags and mixtures in the production of iron and steel

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	D. O. Stepanenko, D. M. Tohobytska, A. I. Bielkova, N. O. Tsiupa
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2021
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001316836
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Selection of basic components of slag-forming mixture for single-step removal of impurities from cast iron
von: V. H. Kysliakov, et al.
Veröffentlicht: (2022)

Development of the model complex of the expert system of control and management of the slag mode in modern mixed blast furnace conditions
von: D. M. Tohobytska, et al.
Veröffentlicht: (2020)

To the choice of optimal composition of slag is desulfurization pipe steel grades
von: D. N. Togobitskaja, et al.
Veröffentlicht: (2014)

Heat conditions of slags synthesis on the basis final steel-smelting slags for out-of-furnace treatment of the iron-carbon alloys
von: S. I. Kurpas, et al.
Veröffentlicht: (2011)

Selection for the Composition of the Charge with Minimal Heat Consumption for Smelting Low-Phosphorus Slag
von: O. S. Vodennikova, et al.
Veröffentlicht: (2021)

The study of the process of dissolution of slag-forming mixtures in the form of a filter
von: N. K. Sigarev, et al.
Veröffentlicht: (2017)

The development of an integrated criterion for the rational selection of polymeric composite materials
von: A. V. Gajdachuk, et al.
Veröffentlicht: (2019)

Development and testing of algorithmic support of the expert system for selecting the optimal composition of multicomponent blast furnace charge in specific conditions of blast furnace operation
von: D. M. Tohobytska, et al.
Veröffentlicht: (2022)

The concept of creating an expert system for selecting the optimal composition of a multicomponent mixture
von: I. G. Muraveva, et al.
Veröffentlicht: (2018)

Rational technology of preparation of iron for smelting of low-sulphur oxygen converter steel
von: A. S. Vergun, et al.
Veröffentlicht: (2012)

Methodological bases of physical and chemical modeling and optimization of processes of production of iron and steel
von: D. N. Togobitskaja, et al.
Veröffentlicht: (2019)

Experimental and theoretical evaluation of sulfur absorption capacity of slags in production of steel with electric methods
von: D. N. Togobitskaja, et al.
Veröffentlicht: (2017)

Comparative analysis of the use slag materials and liga-tures for chromic cast-irons production
von: E. A. Jasinskaja
Veröffentlicht: (2014)

Selection of criteria and development of model for manganiferous slag viscosity prediction
von: D. N. Togobitskaja, et al.
Veröffentlicht: (2012)

Common factors of changes in slag composition and sulfur content in cast iron in the technological chain blast furnace - cast iron desulfurization complex - converter
von: A. P. Shevchenko, et al.
Veröffentlicht: (2022)

Processing and use of steel-smelting slags
von: V. L. Najdek, et al.
Veröffentlicht: (2013)

Complex refining of cast iron containing slag by liquid soda
von: P. A. Plokhikh, et al.
Veröffentlicht: (2014)

The research of open-hearth slag as a perspective feedstock for the production of ceramic pigments. Study of mineralogical composition of the slag. Report 2
von: A. V. Zajchuk, et al.
Veröffentlicht: (2011)

Industrial complex for pig iron desulphurization by magnesium and for slag removing creating on the steel plant № 2 corporation CSC (Taiwan)
von: A. F. Shevchenko, et al.
Veröffentlicht: (2013)

The influence of the liquid refining slags composition on the efficiency of a ladle desulfurization of the converter steels
von: S. G. Melnik
Veröffentlicht: (2011)

The research of open-hearth slag as a perspective feedstock for the production of ceramic pigments. Study of granulometric and chemical composition of the slag. Report 1
von: A. V. Zajchuk, et al.
Veröffentlicht: (2011)

The chemical composition of blast furnace slags
von: V. I. Larin, et al.
Veröffentlicht: (2015)

Dumping Blast Furnace Slags as Technogenic Raw Materials of Slag-Alkaline Binders Production
von: E. B. Khobotova, et al.
Veröffentlicht: (2013)

Experimental studies of melting temperatures of CaF2, pegmatite and their mixtures with lime
von: D. O. Stepanenko, et al.
Veröffentlicht: (2019)

Improvement of technological mixtures for BOF shop of PJSC &quot;Ilyich Iron and Steel Works&quot;
von: K. E. Pismarev, et al.
Veröffentlicht: (2017)

Use Dnieprodzerzhinsky slag steel mill as sorpsion materials
von: V. A. Baklazhko, et al.
Veröffentlicht: (2016)

Selection of rational methods of complex dehydration of the rock mass
von: V. P. Nadutyj, et al.
Veröffentlicht: (2017)

Influence of basicity of slag melt on the process of plasma-arc liquid- phase reduction of iron by gases
von: D. M. Zhirov
Veröffentlicht: (2013)

Melting of titanium slag for use in welding production
von: F. K. Biktagirov, et al.
Veröffentlicht: (2017)

Asymmetric information, intermediation, coordination, rational self-selection and social welfare
von: V. Gorbachuk, et al.
Veröffentlicht: (2022)

Pig-iron and slag temperature on exhaustion at blast furnace operated with different fuel
von: I. V. Mishyn, et al.
Veröffentlicht: (2012)

Change of working properties for slag-forming mixtures during sequence casting and its effect on continous casting process
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Effectiveness of combined gas-slag protection at mig deposition of copper alloys on steel
von: T. B. Maidanchuk, et al.
Veröffentlicht: (2022)

Research by various ways of a phase and chemical composition, and also petrography of the slag which is forming after a desulfuration of cast iron by granulated magnesium
von: P. A. Plokhikh, et al.
Veröffentlicht: (2014)

Structural chemical condition of the refiner slags under ladle steel treatment
von: B. F. Belov, et al.
Veröffentlicht: (2015)

Peculiarities of the oxidizing and reducing refining of the worked out steel-smelting slags
von: V. I. Kurpas, et al.
Veröffentlicht: (2011)

Estimation of possibility of ferronickel production slag utilization for sewage treatment
von: E. B. Khobotova, et al.
Veröffentlicht: (2011)

Thermodynamic analysis of slag melts at production of welding fused fluxes
von: L. A. Zhdanov, et al.
Veröffentlicht: (2012)

Selection rational schemes of inspection and methods degassing of the worked out space
von: B. V. Bokij, et al.
Veröffentlicht: (2016)

Analysis of possibility of slag crust application in production of agglomerated fluxes
von: I. A. Goncharov, et al.
Veröffentlicht: (2016)