Cover Image

Improving wear and corrosion properties of magnesium alloy by cold sprayed nano WC–17Co coating

Saved in:

Bibliographic Details
Date:	2021
Main Authors:	Chen Jie, Song Hui, Liu Guang, Zheng Ziyun, Tang Jiayun, Cui Lang
Format:	Article
Language:	English
Published:	2021
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001320656
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
by: H. L. Tian, et al.
Published: (2014)

Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
by: Tian, H.L., et al.
Published: (2014)

Microstructure and wear-resistant properties of WC/SS316L composite coatings prepared by gas-dynamic spraying with application of laser heating
by: B. Li, et al.
Published: (2016)

Reduction of WO3 to WC nano particles by reflux reaction
by: R. Kumar, et al.
Published: (2013)

Soatings based on nano clad powders for the corrosion protection of magnesium alloys
by: I. V. Smyrnov, et al.
Published: (2012)

Influence of µ-size WC on the corrosion behavior of ultrafine WC/WC–Co cemented carbides
by: C. Liu, et al.
Published: (2019)

High velocity air-fuel spraying of heat and wear resistant coatings
by: V. M. Kysil, et al.
Published: (2010)

Peculiarities of metallurgical processes in plasma-arc spraying of coatings produced from steel wire with powder fillers WC and WC–Co
by: G. M. Grigorenko, et al.
Published: (2015)

Nano-dispersed films deposited with pulsed laser spraying of Ni-Au combined targets
by: A. G. Bagmut, et al.
Published: (2010)

Phase composition, microstructure and wear properties of Ni/Ni3Si composites prepared by mechanical alloying
by: Junxi Zhang, et al.
Published: (2021)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: A. Kurio, et al.
Published: (2012)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: Kurio, A., et al.
Published: (2012)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)

Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
by: Tang, C., et al.
Published: (2015)

Wear resistance of Fe-Cr–Mn–Ti–Al coatings sprayed by powder wires
by: L. I. Bohun, et al.
Published: (2019)

Abrasive wear resistance of alloyed electric arc sprayed coatings from powder wires
by: V. M. Hvozdetskyi
Published: (2018)

Wear and corrosion resistance of electric-arc coatings, sprayed with cord wires of type Stein-Mesyfil
by: Yu. Gargasas, et al.
Published: (2014)

Investigation of structure and properties of thermal coatings of WC-Co-Cr system produced by high-velocity methods of spraying
by: B. S. Borisov, et al.
Published: (2015)

Optimization of Residual Stresses in Laser-Mixed WC(Co,Ni) Coatings
by: Liu, C.W., et al.
Published: (2019)

Wear resistance and strength of tungsten carbides WC–W2C produced by different methods
by: A. I. Belyj
Published: (2010)

Influence of micron WC addition on the microstructure and mechanical properties of ultrafine WC–Co cemented carbides at the elevated temperature
by: C. Liu, et al.
Published: (2018)

Influence of micron WC addition on the microstructure and mechanical properties of ultrafine WC–Co cemented carbides at the elevated temperature
by: Liu, C., et al.
Published: (2018)

Matrix Spherical Functions for (SU( + ), S(U() × U())) : Two Specific Classes
by: Liu, Jie
Published: (2023)

Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
by: Wei, Y.H., et al.
Published: (2019)

Structure and wear resistance of VC–FeCr and VC–FeCrCo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018)

Spray dryers in biotechnology
by: Yu. I. Sydorov
Published: (2012)

Effect of Nano-TiO₂ Particles on Wear and Corrosion Behaviour of AA6063 Surface Composite Fabricated by Friction Stir Processing
by: Muthukrishnan, D., et al.
Published: (2018)

Behavior of magnesium in electroslag melting of wastes of aluminium magnesium-containing alloys
by: A. V. Gnatushenko
Published: (2013)

МІКРОКРИСТАЛИ WC, ВИРОЩЕНІ З WC–Co РОЗПЛАВІВ
by: Бондаренко, В.П., et al.
Published: (2025)

Dynamics of spraying multicomponent materials
by: Kh. Draganov, et al.
Published: (2017)

Characterization on the cardiac function of hypothermic dogs from cold water immersion
by: Chengxiang Lei, et al.
Published: (2011)

Study on cutting performance and tool wear of micro-textured tool for milling Ti6Al4V
by: Shen Xiang-yu, et al.
Published: (2017)

Characterization of tool wear when machining Alloy 718 with high pressure cooling using conventional and surface-modified WC–Co tools
by: Hoier, P., et al.
Published: (2017)

Investigation of spraying spot and pattern of metallization under conditions of microplasma spraying of titanium dioxide coating
by: Ju. S. Borisov, et al.
Published: (2014)

Effect of technological factors of microplasma spraying of TiO2 on amount of applied sprayed material
by: Ju. S. Borisov, et al.
Published: (2016)

Effect of nano-SiO₂ and lime on characteristics and mechanical properties of coastal clay
by: Wentao Shang, et al.
Published: (2019)

Effect of electric-magnetic composite field on WC particulate reinforced metal matrix composites layers by laser melt injection
by: L. Van, et al.
Published: (2016)

Effect of parameters of plasma spraying conditions using current-carrying wire on fraction composition of spraying particles
by: G. M. Rusev, et al.
Published: (2013)

New characterizations for differences of composition operators between weighted-type spaces in the unit ball
by: Chen, C., et al.
Published: (2021)