Study of deformation-thermal treatment effect on structure formation for transitional class alloys in the system Fe-C-Mn-Cr
Gespeichert in:
| Datum: | 2013 |
|---|---|
| Hauptverfasser: | G. V. Levchenko, V. L. Pljuta, S. V. Bobyr, A. B. Sychkov, A. M. Nesterenko |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2013
|
| Schriftenreihe: | Fundamental and applied problems of ferrous metallurgy |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000839612 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Thermal synthesis powder Fe-Mn-C-Cu master alloy
von: H. A. Bahliuk, et al.
Veröffentlicht: (2009)
von: H. A. Bahliuk, et al.
Veröffentlicht: (2009)
The texture features of the deformed CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
Structure of the High-Entropy CrMnFeCoNi and CrMnFeCoNi2Cu Alloys and Thermal Stability of Its Electrical Transport Properties
von: M. O. Krapivka, et al.
Veröffentlicht: (2015)
von: M. O. Krapivka, et al.
Veröffentlicht: (2015)
Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
von: M. I. Pashechko
Veröffentlicht: (2010)
von: M. I. Pashechko
Veröffentlicht: (2010)
Structure Fe - Cr - Mn – N steel after pressure deformation and cavitation wear
von: P. M. Kucherenko
Veröffentlicht: (2018)
von: P. M. Kucherenko
Veröffentlicht: (2018)
Thermally activated deformation of nanocrystalline and coarse grained CoCrFeNiMn high entropy alloy in the temperature range 4.2–350 K
von: A. V. Podolskiy, et al.
Veröffentlicht: (2018)
von: A. V. Podolskiy, et al.
Veröffentlicht: (2018)
Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)
Thermal deformation of iron-carbon alloys and its influence on the diagramme of Fe-C state
von: M. M. Berezhnyi, et al.
Veröffentlicht: (2013)
von: M. M. Berezhnyi, et al.
Veröffentlicht: (2013)
Thermal deformation of iron-carbon alloys and its influence on the diagramme of FE-C state
von: Мацишин, Сергій Олегович, et al.
Veröffentlicht: (2014)
von: Мацишин, Сергій Олегович, et al.
Veröffentlicht: (2014)
Thermal deformation of iron-carbon alloys and its influence on the diagramme of FE-C state
von: Мацишин, Сергій Олегович, et al.
Veröffentlicht: (2014)
von: Мацишин, Сергій Олегович, et al.
Veröffentlicht: (2014)
Improvement of Wear Resistance of Surface Coated Fe—Cr—Mn-Metal by Plasma Treatment with Fabrication of Metastable Structure
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2013)
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2013)
Influence of plastic deformation on the phase composition, texture, and mechanical properties of the CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
von: M. V. Karpets, et al.
Veröffentlicht: (2015)
Зносотривкість евтектичних покривів системи Fe–Mn–C–B, легованих Si, Ni і Cr
von: Пашечко, М.І.
Veröffentlicht: (2010)
von: Пашечко, М.І.
Veröffentlicht: (2010)
High-Temperature Diffractometry Study of Features of the FeCoNiMnCr Alloy Oxidation
von: M. V. Karpets, et al.
Veröffentlicht: (2014)
von: M. V. Karpets, et al.
Veröffentlicht: (2014)
Evaluation of wear resistance of Fe–Mn–C–B eutectic coatings, alloyed with Si, Ni i Cr, using multicriterion analysis
von: M. I. Pashechko, et al.
Veröffentlicht: (2011)
von: M. I. Pashechko, et al.
Veröffentlicht: (2011)
Optimization of conductive monotectic Cu-(FeCr-C) alloys composition
von: V. V. Khristenko, et al.
Veröffentlicht: (2015)
von: V. V. Khristenko, et al.
Veröffentlicht: (2015)
Low-temperature mechanical properties and thermally activated plasticity parameters of the CrMnFeCoNi2Cu high entropy alloy
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2020)
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2020)
Development and smelting of casting high-entropy alloys based on the Fe-Co-Ni-Mn-Cr system
von: O. A. Shcheretskyi, et al.
Veröffentlicht: (2022)
von: O. A. Shcheretskyi, et al.
Veröffentlicht: (2022)
Concentration stratification and structural changes in the Fe–Ni–Cr alloy after the warm twist deformation
von: B. M. Efros, et al.
Veröffentlicht: (2015)
von: B. M. Efros, et al.
Veröffentlicht: (2015)
Formation and physicochemical properties of high entropy oxide based on equiatomic alloy CrFeCoNiMn
von: V. F. Gorban, et al.
Veröffentlicht: (2019)
von: V. F. Gorban, et al.
Veröffentlicht: (2019)
Особливості взаємодії лігатури Fe-Ni-Cr-Cu-Mn з сірим чавуном
von: Parkhomchuk, Zh. V., et al.
Veröffentlicht: (2024)
von: Parkhomchuk, Zh. V., et al.
Veröffentlicht: (2024)
Formation of dislocation structure of Cr – Mn – N steels at deformation under pressure and cavitation
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)
Wear resistance of Fe-Cr–Mn–Ti–Al coatings sprayed by powder wires
von: L. I. Bohun, et al.
Veröffentlicht: (2019)
von: L. I. Bohun, et al.
Veröffentlicht: (2019)
The influence of dispersion hardening by nanooxides on corrosion resistance of high-energy Cr–Fe–Mn–Ni alloys in lead melts
von: V. M. Fedirko, et al.
Veröffentlicht: (2019)
von: V. M. Fedirko, et al.
Veröffentlicht: (2019)
Optimization of chromium content in powder wires Fe–Cr–C, Fe–Cr–B by corrosion resistance of electric arc coatings
von: T. R. Stupnytskyi, et al.
Veröffentlicht: (2016)
von: T. R. Stupnytskyi, et al.
Veröffentlicht: (2016)
Features of structure formation, kinetics of phase transformations, mechanical and tribological properties of the Fe-based Cr–Mn–Ni alloys
von: Yu. M. Koval, et al.
Veröffentlicht: (2020)
von: Yu. M. Koval, et al.
Veröffentlicht: (2020)
Термічний синтез порошкової Fe – Mn – C – Cu лігатури
von: Баглюк, Г.А., et al.
Veröffentlicht: (2009)
von: Баглюк, Г.А., et al.
Veröffentlicht: (2009)
Effect of a Plastic Deformation by Upsetting on Properties of Invar Fe—35%Ni—0,49%Mn Alloy
von: V. M. Nadutov, et al.
Veröffentlicht: (2015)
von: V. M. Nadutov, et al.
Veröffentlicht: (2015)
Influence of a chromium carbide content on wear-resistance of the Fe-Cr-C system alloys
von: A. A. Mikhajlov, et al.
Veröffentlicht: (2010)
von: A. A. Mikhajlov, et al.
Veröffentlicht: (2010)
Trends in the creation and additional alloying of wear-resistant materials based on the Fe – Cr – C system
von: V. A. Masliuk, et al.
Veröffentlicht: (2018)
von: V. A. Masliuk, et al.
Veröffentlicht: (2018)
Структура Fe – Cr – Mn – N сталі після деформації тиском та кавітаційного зношування
von: Kucherenko, P. M.
Veröffentlicht: (2018)
von: Kucherenko, P. M.
Veröffentlicht: (2018)
Structure and properties of deposited wear-resistant Fe-Cr–Mn steel with controllable content of metastable austenite
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2011)
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2011)
Structure and properties of reinforcing rolled coils by v-alloyed dual-and multi-phase C-Mn-Si-steel
von: V. L. Pliuta, et al.
Veröffentlicht: (2022)
von: V. L. Pliuta, et al.
Veröffentlicht: (2022)
Features of structure sheet low alloy steel in combined heat treatment
von: V. L. Pljuta, et al.
Veröffentlicht: (2015)
von: V. L. Pljuta, et al.
Veröffentlicht: (2015)
Thermal stability of powdery TiC, ZrC, Cr3C2 and WC on air
von: V. G. Kudin
Veröffentlicht: (2014)
von: V. G. Kudin
Veröffentlicht: (2014)
High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys obtained by mechanical alloying and subsequent sintering
von: V. V. Cherniavskyi, et al.
Veröffentlicht: (2018)
von: V. V. Cherniavskyi, et al.
Veröffentlicht: (2018)
Prospects for obtaining of alloys with "frozen emulsions” structure on Cu – (Fe – Cr – C) system basis
von: V. V. Khrystenko, et al.
Veröffentlicht: (2015)
von: V. V. Khrystenko, et al.
Veröffentlicht: (2015)
Modeling the phase-structural state and controlling the properties of metal of Fe-Cr-Mn alloying system, deposited on low-carbon structural steel
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2018)
von: Ja. A. Chejljakh, et al.
Veröffentlicht: (2018)
Influence of replacement of Mn by Cr on magnetocaloric properties of quenched NiMn1–xCrxGe alloys
von: E. Zubov, et al.
Veröffentlicht: (2018)
von: E. Zubov, et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Thermal synthesis powder Fe-Mn-C-Cu master alloy
von: H. A. Bahliuk, et al.
Veröffentlicht: (2009) -
The texture features of the deformed CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015) -
Structure of the High-Entropy CrMnFeCoNi and CrMnFeCoNi2Cu Alloys and Thermal Stability of Its Electrical Transport Properties
von: M. O. Krapivka, et al.
Veröffentlicht: (2015) -
Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
von: M. I. Pashechko
Veröffentlicht: (2010) -
Structure Fe - Cr - Mn – N steel after pressure deformation and cavitation wear
von: P. M. Kucherenko
Veröffentlicht: (2018)