Cover Image

Study of deformation-thermal treatment effect on structure formation for transitional class alloys in the system Fe-C-Mn-Cr

Saved in:

Bibliographic Details
Date:	2013
Main Authors:	G. V. Levchenko, V. L. Pljuta, S. V. Bobyr, A. B. Sychkov, A. M. Nesterenko
Format:	Article
Language:	English
Published:	2013
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000839612
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

The texture features of the deformed CrMnFeCoNi2Cu high-entropy alloy
by: M. V. Karpets, et al.
Published: (2015)

Thermal synthesis powder Fe-Mn-C-Cu master alloy
by: H. A. Bahliuk, et al.
Published: (2009)

Structure of the High-Entropy CrMnFeCoNi and CrMnFeCoNi2Cu Alloys and Thermal Stability of Its Electrical Transport Properties
by: M. O. Krapivka, et al.
Published: (2015)

Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
by: Kolodiy, I.V., et al.
Published: (2021)

Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
by: Yu. P. Mazur, et al.
Published: (2017)

Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
by: Yu. P. Mazur, et al.
Published: (2017)

Thermally activated deformation of nanocrystalline and coarse grained CoCrFeNiMn high entropy alloy in the temperature range 4.2–350 K
by: Podolskiy, A.V., et al.
Published: (2018)

Thermally activated deformation of nanocrystalline and coarse grained CoCrFeNiMn high entropy alloy in the temperature range 4.2–350 K
by: A. V. Podolskiy, et al.
Published: (2018)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
by: M. I. Pashechko
Published: (2010)

Structure Fe - Cr - Mn – N steel after pressure deformation and cavitation wear
by: P. M. Kucherenko
Published: (2018)

Thermal deformation of iron-carbon alloys and its influence on the diagramme of Fe-C state
by: M. M. Berezhnyi, et al.
Published: (2013)

Influence of plastic deformation on the phase composition, texture, and mechanical properties of the CrMnFeCoNi2Cu high-entropy alloy
by: M. V. Karpets, et al.
Published: (2015)

Thermal deformation of iron-carbon alloys and its influence on the diagramme of FE-C state
by: Мацишин, Сергій Олегович, et al.
Published: (2014)

Thermal deformation of iron-carbon alloys and its influence on the diagramme of FE-C state
by: Мацишин, Сергій Олегович, et al.
Published: (2014)

Features of structure sheet low alloy steel in combined heat treatment
by: V. L. Pljuta, et al.
Published: (2015)

Микроструктура и свойства высокоэнтропийных сплавов СoCrFeMnNiV₀,₂₅C₀,₁₇₅ И CrFe₂MnNiV₀,₂₅C₀,₁₇₅
by: Тихоновский, М.А., et al.
Published: (2016)

High-Temperature Diffractometry Study of Features of the FeCoNiMnCr Alloy Oxidation
by: M. V. Karpets, et al.
Published: (2014)

Hardening of Cr-Fe-Ni-Mn high-entropy alloys caused by the irradiation with argon ions
by: Tolstolutskaya, G.D., et al.
Published: (2017)

Low-temperature mechanical properties and thermally activated plasticity parameters of the CrMnFeCoNi2Cu high entropy alloy
by: E. D. Tabachnikova, et al.
Published: (2020)

Improvement of Wear Resistance of Surface Coated Fe—Cr—Mn-Metal by Plasma Treatment with Fabrication of Metastable Structure
by: Ja. A. Chejljakh, et al.
Published: (2013)

Concentration stratification and structural changes in the Fe–Ni–Cr alloy after the warm twist deformation
by: B. M. Efros, et al.
Published: (2015)

Optimization of conductive monotectic Cu-(FeCr-C) alloys composition
by: V. V. Khristenko, et al.
Published: (2015)

Formation and physicochemical properties of high entropy oxide based on equiatomic alloy CrFeCoNiMn
by: V. F. Gorban, et al.
Published: (2019)

Development and smelting of casting high-entropy alloys based on the Fe-Co-Ni-Mn-Cr system
by: O. A. Shcheretskyi, et al.
Published: (2022)

Electronic properties of AlN crystal doped with Cr, Mn and Fe
by: Syrotyuk, S.V., et al.
Published: (2013)

Electron irradiation, temperature, and stress effect on corrosion of Zr-, Ni-Cr-, and Fe-Cr-based alloys in the vicinity of the water coolant supercritical transition
by: Bakai, O.S., et al.
Published: (2020)

Effect of a Plastic Deformation by Upsetting on Properties of Invar Fe—35%Ni—0,49%Mn Alloy
by: V. M. Nadutov, et al.
Published: (2015)

The influence of dispersion hardening by nanooxides on corrosion resistance of high-energy Cr–Fe–Mn–Ni alloys in lead melts
by: V. M. Fedirko, et al.
Published: (2019)

Evaluation of wear resistance of Fe–Mn–C–B eutectic coatings, alloyed with Si, Ni i Cr, using multicriterion analysis
by: M. I. Pashechko, et al.
Published: (2011)

Структура високоентропійних сплавів CrMnFeCoNi і CrMnFeCoNi₂Cu та термостабільність їх електротранспортних властивостей
by: Крапівка, М.О., et al.
Published: (2015)

Features of structure formation, kinetics of phase transformations, mechanical and tribological properties of the Fe-based Cr–Mn–Ni alloys
by: Yu. M. Koval, et al.
Published: (2020)

High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys obtained by mechanical alloying and subsequent sintering
by: V. V. Cherniavskyi, et al.
Published: (2018)

Influence of preliminary hydrostatic pressure treatment on the electrical resistance and structure of amorphous Co₆₇Cr₇Fe₄Si₈B₁₄ alloy
by: Varyukhin, V.N., et al.
Published: (2010)

Sorption properties of eutectic alloys of the Ti – Fe – Mn system
by: V. H. Ivanchenko, et al.
Published: (2011)

Formation of dislocation structure of Cr – Mn – N steels at deformation under pressure and cavitation
by: Ya. Shypytsyn, et al.
Published: (2014)

Brazing alloys of Ti–Zr–(Fe, Mn, Co) system for brazing of titanium alloys
by: V. F. Khorunov, et al.
Published: (2013)

Structure and properties of reinforcing rolled coils by v-alloyed dual-and multi-phase C-Mn-Si-steel
by: V. L. Pliuta, et al.
Published: (2022)

Low carbon steel for hot metal deformation tools (review)
by: S. V. Bobyr, et al.
Published: (2019)

Structure and Magnetic Properties of Fe2MnGa Alloy
by: Yu. V. Kudriavtsev, et al.
Published: (2014)

Зносотривкість евтектичних покривів системи Fe–Mn–C–B, легованих Si, Ni і Cr
by: Пашечко, М.І.
Published: (2010)