Experimental study of material hardness during reversive enclosed broaching
Збережено в:
| Дата: | 2012 |
|---|---|
| Автори: | S. V. Miroshnichenko, Ju. V. Konovalov |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2012
|
| Назва видання: | Metal and casting of Ukraine |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000439579 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
On the contact interaction of hard-alloy deforming broaches with the workpiece during the formation of grooves in the holes of tubular products
за авторством: Ye. Sheikin, та інші
Опубліковано: (2021)
за авторством: Ye. Sheikin, та інші
Опубліковано: (2021)
Study atsetilyuyuchih form of pantothenic acid during hypoxia enclosed space
за авторством: N. V. Salnikova, та інші
Опубліковано: (2014)
за авторством: N. V. Salnikova, та інші
Опубліковано: (2014)
Improving the efficiency of carbide deforming broaches using modified process lubricants
за авторством: Ye. Sheikin, та інші
Опубліковано: (2020)
за авторством: Ye. Sheikin, та інші
Опубліковано: (2020)
Computer and experimental studies on the distribution of hardness of a steel tool body caused by phase transformations during the induction hardening
за авторством: V. A. Dutka, та інші
Опубліковано: (2012)
за авторством: V. A. Dutka, та інші
Опубліковано: (2012)
The influence of deformation conditions on the structure and hardening of cast iron surface layer in machining with combined carbide broaches
за авторством: S. F. Studenets, та інші
Опубліковано: (2015)
за авторством: S. F. Studenets, та інші
Опубліковано: (2015)
Different Variants of Thermorenovation of Enclosing Constructions of Floor Part in the Existing Office Building and Monitoring of Heat Losses During its Protracted Exploitation
за авторством: B. I. Basok, та інші
Опубліковано: (2013)
за авторством: B. I. Basok, та інші
Опубліковано: (2013)
Criteria of determining the gas saturation anomalous zones in the enclosing rocks of coal-bearing strata
за авторством: V. V. Lukinov, та інші
Опубліковано: (2016)
за авторством: V. V. Lukinov, та інші
Опубліковано: (2016)
Stimulated Raman scattering of Rhodamine 6G in polymer samples enclosed in scattering cover
за авторством: Yashchuk, V.P., та інші
Опубліковано: (2015)
за авторством: Yashchuk, V.P., та інші
Опубліковано: (2015)
Approbation of the methods of materials hardness determination
за авторством: V. I. Moshchenok
Опубліковано: (2013)
за авторством: V. I. Moshchenok
Опубліковано: (2013)
Formation of clusters during synthesis of gold nanoparticles in reverse micelles
за авторством: M. G. Spirin, та інші
Опубліковано: (2011)
за авторством: M. G. Spirin, та інші
Опубліковано: (2011)
OPTIMAL CONTROL OF THE ELECTRIC SHIPS’ PROPULSION MOTORS DURING REVERSAL
за авторством: Yarovenko, V. A., та інші
Опубліковано: (2018)
за авторством: Yarovenko, V. A., та інші
Опубліковано: (2018)
Corrosion effect on the adhesive strength of a contact between a hard indenter and a soft elastomer: An experimental study
за авторством: I. A. Lyashenko, та інші
Опубліковано: (2023)
за авторством: I. A. Lyashenko, та інші
Опубліковано: (2023)
Corrosion effect on the adhesive strength of a contact between a hard indenter and a soft elastomer: An experimental study
за авторством: Ya. O. Liashenko, та інші
Опубліковано: (2023)
за авторством: Ya. O. Liashenko, та інші
Опубліковано: (2023)
Experimental investigation of the parameters of water solution purposes by ceramic, coal filters and reverse-osmotic module
за авторством: S. V. Huliienko
Опубліковано: (2019)
за авторством: S. V. Huliienko
Опубліковано: (2019)
The effect of sealing of the NSC enclosing perimeter on the surface contamination of the external surfaces of the Shelter object roof and assessment of the possibility of their deactivation
за авторством: L. I. Pavlovskyi, та інші
Опубліковано: (2022)
за авторством: L. I. Pavlovskyi, та інші
Опубліковано: (2022)
Procedure of the multiple indentations for determination of the hardness parameters of structurally heterogeneous materials
за авторством: V. I. Kushch, та інші
Опубліковано: (2015)
за авторством: V. I. Kushch, та інші
Опубліковано: (2015)
Features of resection during the height of acute radiation sickness (experimental study)
за авторством: Ya. Kostiuk, та інші
Опубліковано: (2015)
за авторством: Ya. Kostiuk, та інші
Опубліковано: (2015)
THE INFLUENCE OF WIND SPEED PROBABILITY DISTRIBUTION PARAMETERS ON THE ENERGY EFFICIENCY OF COASTAL AND OFFSHORE WIND FARMS IN ENCLOSED SEAS: A CASE STUDY OF THE AZOV-BLACK SEA REGION OF UKRAINE
за авторством: Vasko , P., та інші
Опубліковано: (2025)
за авторством: Vasko , P., та інші
Опубліковано: (2025)
Radiation situation in zones of production activities of construction east and west walls enclosing contour new safe confinement and forecast of its changes in progress
за авторством: D. V. Gorodetskij, та інші
Опубліковано: (2015)
за авторством: D. V. Gorodetskij, та інші
Опубліковано: (2015)
Experimental study on the durability of composite materials collectors of solar energy
за авторством: O. M. Surzhyk
Опубліковано: (2016)
за авторством: O. M. Surzhyk
Опубліковано: (2016)
Experimental study on the durability of composite materials collectors of solar energy
за авторством: Surzhyk, O.
Опубліковано: (2016)
за авторством: Surzhyk, O.
Опубліковано: (2016)
Experimental studies of silicon bond energy in manganese ore materials and slags
за авторством: Yu. S. Projdak, та інші
Опубліковано: (2024)
за авторством: Yu. S. Projdak, та інші
Опубліковано: (2024)
Reactions of corn cell cultures during hard osmotic stresses action
за авторством: L. E. Sergeeva, та інші
Опубліковано: (2017)
за авторством: L. E. Sergeeva, та інші
Опубліковано: (2017)
Experimental study of the thermal conductivity of composite materials collectors of solar energy
за авторством: Reztsov, V., та інші
Опубліковано: (2016)
за авторством: Reztsov, V., та інші
Опубліковано: (2016)
Reverse engineering of the bulk carbon filter shells
за авторством: Ju. Kukhar
Опубліковано: (2016)
за авторством: Ju. Kukhar
Опубліковано: (2016)
The effect of the indentation load on the results of measuring hardness of superhard materials
за авторством: M. G. Loshak, та інші
Опубліковано: (2012)
за авторством: M. G. Loshak, та інші
Опубліковано: (2012)
Shear-induced metallization on (001) and (111) surfaces of diamond during hardness tests
за авторством: S. M. Dub, та інші
Опубліковано: (2021)
за авторством: S. M. Dub, та інші
Опубліковано: (2021)
Experimental study of the thermal conductivity of composite materials collectors of solar energy
за авторством: V. F. Reztsov, та інші
Опубліковано: (2016)
за авторством: V. F. Reztsov, та інші
Опубліковано: (2016)
Reverse Logistics of Industrial Waste
за авторством: I. M. Kocheshkova, та інші
Опубліковано: (2018)
за авторством: I. M. Kocheshkova, та інші
Опубліковано: (2018)
Procedure of the multiple indentations for determination of the hardness parameters of structurally heterogeneous materials
за авторством: M. V. Karpets, та інші
Опубліковано: (2015)
за авторством: M. V. Karpets, та інші
Опубліковано: (2015)
Influence of structure of hybrid super hard material on the performance of drilling tool
за авторством: R. K. Bogdanov, та інші
Опубліковано: (2016)
за авторством: R. K. Bogdanov, та інші
Опубліковано: (2016)
A study on the reversibility of electric response induced by second sound in superfluid helium
за авторством: Jean-Paul van Woensel, та інші
Опубліковано: (2019)
за авторством: Jean-Paul van Woensel, та інші
Опубліковано: (2019)
On time reversibility of tachyon kinematics
за авторством: Ya. I. Hrushka
Опубліковано: (2016)
за авторством: Ya. I. Hrushka
Опубліковано: (2016)
Morphological study of changes in tissues of experimental animals with implanting various structural materials
за авторством: L. D. Chulak, та інші
Опубліковано: (2013)
за авторством: L. D. Chulak, та інші
Опубліковано: (2013)
Formation of structure, phase composition and faulty substructure in the bulk- and differentially-hard-tempered rails
за авторством: V. E. Gromov, та інші
Опубліковано: (2014)
за авторством: V. E. Gromov, та інші
Опубліковано: (2014)
Determining shock hardness and micro hardness of nonferrous metals and their alloys
за авторством: O. O. Kotrechko
Опубліковано: (2016)
за авторством: O. O. Kotrechko
Опубліковано: (2016)
Application of nanostructured interlayers in compounds of hard-to-weld materials on aluminium base (Review)
за авторством: D. A. Ishchenko
Опубліковано: (2011)
за авторством: D. A. Ishchenko
Опубліковано: (2011)
Experimental studies springy-tensometric weight devices with ponderomotive force introduction node for casting materials dosage
за авторством: K. S. Bogdan, та інші
Опубліковано: (2014)
за авторством: K. S. Bogdan, та інші
Опубліковано: (2014)
Academic School of V.N. Bakul Institute for Super Hard Materials of the NAS of Ukraine
за авторством: B. A. Malitskij, та інші
Опубліковано: (2011)
за авторством: B. A. Malitskij, та інші
Опубліковано: (2011)
Experimental installation for the study of heat transfer in helium environment during dry storage of spent nuclear fuel
за авторством: Yatsenko, M.V., та інші
Опубліковано: (2022)
за авторством: Yatsenko, M.V., та інші
Опубліковано: (2022)
Схожі ресурси
-
On the contact interaction of hard-alloy deforming broaches with the workpiece during the formation of grooves in the holes of tubular products
за авторством: Ye. Sheikin, та інші
Опубліковано: (2021) -
Study atsetilyuyuchih form of pantothenic acid during hypoxia enclosed space
за авторством: N. V. Salnikova, та інші
Опубліковано: (2014) -
Improving the efficiency of carbide deforming broaches using modified process lubricants
за авторством: Ye. Sheikin, та інші
Опубліковано: (2020) -
Computer and experimental studies on the distribution of hardness of a steel tool body caused by phase transformations during the induction hardening
за авторством: V. A. Dutka, та інші
Опубліковано: (2012) -
The influence of deformation conditions on the structure and hardening of cast iron surface layer in machining with combined carbide broaches
за авторством: S. F. Studenets, та інші
Опубліковано: (2015)